Irin alagbara, irin 321/321H Perforated Sheets
Apejuwe kukuru:
Irin alagbara, irin 321/321H Perforated Sheets
Irin Alagbara Irin 321/321H Perforated Sheet Specification
Standard: ASTM / ASME A240 / SA240
Iwọn: 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Sisanra: 0.1mm si 12 mm Thk
Fọọmu: Iho Yika ohun ọṣọ, Dimpled, square ihò, goolu digi iho Yika Iho, Yika Punch, Etched, Awọ Perforated Sheets
Ipari: Awo ti a yiyi gbigbona (HR), Apo ti o tutu (CR), 2B, 2D, BA NO (8), SATIN (Pade pẹlu Ṣiṣu)
Lile: Rirọ, Lile, Idaji Lile, Lile mẹẹdogun, Lile orisun omi ati bẹbẹ lọ.
Awọn ipele deede ti SS 321/321H Perforated Sheet
| ITOJU | WORKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 321 | 1.4541 / 1.4878 | S32100 / S32109 | SUS 321 | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17-11-02 / Z3CND18-14-03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
Irin Alagbara Irin 321/321H Perforated Sheet Kemikali Tiwqn
| Eroja | SS 321 |
| C | ti o pọju 0.035 |
| Mn | 2.0 ti o pọju |
| Si | 1.0 ti o pọju |
| P | ti o pọju 0.045 |
| S | ti o pọju 0.030 |
| Cr | 16 – 18 |
| Ni | 10 – 14 |
| Mo | 2 – 3 |
| Fe | 68.89 iṣẹju |
Awọn ohun-ini ẹrọ ti SS 321/321H Perforated Sheet
| Eroja | SS 321 |
| iwuwo | 8.0 g / cm3 |
| Ojuami Iyo | 1399°C (2550°F) |
| Agbara fifẹ | Psi – 75000, MPa – 515 |
| Agbara ikore (0.2% aiṣedeede) | Psi – 30000 , MPa – 205 |
| Ilọsiwaju | 35% |
Awọn oriṣi ti SS 321/321H Perforated Sheets
Irin Alagbara Irin 321/321H Perforated Sheet
SS 321 Dimpled Perforated dì
Ohun ọṣọ ÀpẹẹrẹSS 321H Perforated dìs
SS 321H digi Pari Perforated dì
SS 321 Galvanized Perforated Sheets
WORKSTOFF NR. 1.4541 Perforated dì
2b pariSS 321 Perforated dì
SS 321H Yika Iho Perforated Sheets
WORKSTOFF NR. 1.4878 Perforated dì
SS 321/321H Tutu yiyi Perforated Sheets
SS 321 CR Galvanized Perforated Sheets
SS 321H tutu ti yiyi perforated Sheets
UNS S32109 Tutu Yiyi Perforated Sheets
A240 SS 321H tutu ti yiyi perforated dì
WORKSTOFF NR. 1.4541 Tutu ti yiyi perforated Sheets
Okeere Polish SS 321 CR Perforated dì
WORKSTOFF NR. 1.4878 tutu ti yiyi perforated Sheets
UNS S32109 Tutu Yiyi Perforated Sheets
Yika Iho SS 321H tutu ti yiyi perforated Sheets
SS 321 2b pari Cold Rolled Perforated Sheet
SS 321/321H Gbona Yiyi Perforated Sheets
SS 321 HR Galvanized Perforated Sheets
SS 321H Gbona ti yiyi perforated Sheets
UNS S32100 Gbona Yiyi Perforated dì
A240 SS 321 Gbona ti yiyi perforated dì
Gbona ti yiyi Iho SS 321 Perforated Sheets
SS 321H 2b pari Gbona Yiyi Perforated Sheets
WORKSTOFF NR. 1.4541 Gbona ti yiyi perforated dì
UNS S32109 Gbona Yiyi Perforated dì
Ṣe okeere Polish SS 321H HR Perforated Sheets
WORKSTOFF NR. 1.4878 Gbona ti yiyi perforated dì
Ohun elo ite
| Ohun elo | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 30HCbH, 316H, 30HCb 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S3312S, S30601, S33122 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S332205, S32205, S32101 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS33301S2 SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS313J1, SUS317J1,2 SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430, SUS430LX, SUS43 SUS40, SUS43 SUS40 SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Ọja Specification
| Pari | Sisanra | Awọn abuda | Awọn ohun elo |
| No. 1 | 3.0mm ~ 50.0mm | Ti pari nipasẹ yiyi-gbona, annealing ati pickling, ti a ṣe afihan nipasẹ dada ti o ni funfun | Kemikali ile ise ẹrọ, Industrial tanki |
| No.2B | 0.3mm ~ 6.0mm | Ti pari nipasẹ itọju ooru, yiyan lẹhin yiyi tutu, atẹle nipasẹ laini kọja awọ lati jẹ imọlẹ diẹ sii ati dada didan | General elo Medical Instruments, Tableware |
| Bẹẹkọ. BA (Imọlẹ Annealed) | 0.5mm ~ 2.0mm | Itọju ooru didan lẹhin yiyi tutu | Ohun elo idana, ohun elo ibi idana ounjẹ, idi ayaworan |
| No. 4 | 0.4mm ~ 3.0mm | Didan pẹlu No.. 150 to No.180 mesh abrasives. Awọn julọ gbajumo pari | Wara & Awọn ohun elo iṣelọpọ Ounjẹ, Ohun elo Ile-iwosan, Iwẹ-wẹwẹ |
| No.8 | 0.5mm ~ 2.0mm | Dada didan bii digi kan nipa didan pẹlu awọn abrasives ti o dara julọ ju apapo 800 lọ | Reflector, Digi, Inu ilohunsoke-Ode ọṣọ forbuilding |
| HL (Laini Irun) | 0.4mm ~ 3.0mm | Ti pari nipasẹ didan laini lemọlemọfún | Awọn idi ayaworan, awọn escalators, awọn ọkọ ibi idana ounjẹ |
Kemikali Tiwqn
| Ipele | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Omiiran | - | - | - | - | - |
| Owo400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3 + 3C-0.9 |
Afi ipari si awọn ọja irin alagbara pẹlu iwe egboogi-ipata ati awọn oruka irin lati yago fun ibajẹ.
Awọn aami idanimọ jẹ aami ni ibamu si sipesifikesonu boṣewa tabi awọn ilana alabara.
Iṣakojọpọ pataki wa gẹgẹbi ibeere alabara.
Irin Alagbara Irin Coil Package
Irin alagbara, irin dì / Irin alagbara, Irin Awo Package
Irin Alagbara Irin rinhoho Package
Sowo Package
Ile-iṣẹ wa ni orisun ni Wuxi, apejọ ilu ti irin alagbara, irin ni China.
A ṣe amọja ni awọn coils alagbara, awọn iwe ati awo, irin alagbara irin pipe ati awọn ohun elo, awọn tubes irin alagbara, ati awọn ọja aluminiomu ati awọn ọja Ejò.
Awọn ọja wa ti ni iyìn pupọ nipasẹ awọn alabara wa lati Yuroopu, Amẹrika, Aarin Ila-oorun, Afirika ati Guusu ila oorun Asia. A yoo pese awọn ọja ifigagbaga ati iṣẹ okeerẹ si awọn alabara.
Ipele Irin Alagbara: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 3, 7 420, 430, 430F, 440, 440c,
Alloy ite :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Iwonba Irin, Aluminiomu, Alloy Steel, Erogba Irin, Special Nickel Alloys
Ni fọọmu ti: Awọn ọpa Yika, Awọn ọpa onigun mẹrin, Awọn ọpa onigun mẹrin, Awọn ọpa Flat, Awọn igun, Awọn ikanni, Awọn profaili, Awọn okun waya, Awọn ọpa Waya, Awọn iwe, Awọn awo, Awọn paipu Alailẹgbẹ, Awọn paipu ERW, Flanges, Fittings, ati bẹbẹ lọ.
Q1: Kini alagbara?
A: Alagbara tumọ si pe ko si awọn ami lori oju irin, tabi iru irin ti ko bajẹ nipasẹ afẹfẹ tabi omi ati pe ko yi awọ pada, aibikita, sooro si idoti, ipata, ipa ipakokoro ti awọn kemikali.
Q2: Ṣe alagbara tumọ si ko si ipata?
A: Rara, irin alagbara tumọ si pe ko rọrun lati ni abawọn tabi rusty, o ni agbara pataki lati koju idoti, ipata ati ibajẹ.
Q3: Ṣe o pese irin alagbara, irin sheets?
A: Bẹẹni, a pese awọn oriṣiriṣi awọn iru irin alagbara, irin, pẹlu awọn sakani sisanra lati 0.3-3.0mm. ati ni orisirisi awọn pari.
Q4: Ṣe o gba gige si iṣẹ gigun?
A: Dajudaju, itẹlọrun alabara jẹ pataki wa.
Q5: Ti MO ba ni aṣẹ kekere, ṣe o gba aṣẹ kekere?
A: Kii ṣe iṣoro, ibakcdun rẹ jẹ ibakcdun wa, awọn iwọn kekere ni a gba.
Q6: Bawo ni o ṣe le ṣe iṣeduro didara ọja rẹ?
A: Ni akọkọ, lati ibẹrẹ pupọ, a ti ṣe imuse ẹmi kan si ọkan wọn, iyẹn ni didara ni igbesi aye, awọn oṣiṣẹ ọjọgbọn wa ati awọn oṣiṣẹ yoo tẹle gbogbo igbesẹ titi ti awọn ọja yoo fi ṣajọpọ daradara ati firanṣẹ.
Q7: Ṣe iwọ yoo ṣajọ awọn ọja naa?
A: Awọn eniyan alamọdaju ṣe iṣakojọpọ ọjọgbọn, a ni awọn oriṣi ti iṣakojọpọ aṣayan si awọn alabara, ọkan ti ọrọ-aje tabi ọkan ti o dara julọ.
Q8: Kini o nilo lati mọ lati ọdọ alabara ṣaaju asọye deede?
A: Fun asọye deede, a nilo lati mọ ite, sisanra, iwọn, ipari dada, awọ ati opoiye ti aṣẹ rẹ, ati tun ibi ti awọn ẹru naa. Alaye ọja ti a ṣe adani yoo nilo diẹ sii, bii iyaworan, iṣeto ati ero. Lẹhinna a yoo funni ni asọye idije pẹlu alaye ti o wa loke.
Q9: Iru akoko isanwo wo ni o gba?
A: A gba T / T, West Euroopu, L/C.
Q10: Ti eyi ba jẹ aṣẹ kekere, ṣe iwọ yoo fi ọja naa ranṣẹ si aṣoju wa?
A: Bẹẹni, a bi wa lati yanju awọn iṣoro ti awọn onibara wa, a yoo gba awọn ọja lailewu si ile-ipamọ aṣoju rẹ ati firanṣẹ awọn aworan naa.
Q11: Ṣe o kan ṣe alapin dì? Mo fẹ ṣe arosọ fun iṣẹ akanṣe tuntun mi.
A: Rara, a ṣe agbejade awọn itọju oju iboju alapin irin alagbara, irin, ni akoko kanna, a ṣe ọja ti a ṣe adani ti pari ọja gẹgẹbi iyaworan ati ero alabara, onisẹ ẹrọ wa yoo ṣe abojuto iyokù.
Q12: Awọn ile-iwe melo ni o ti gbejade tẹlẹ?
A: Ti gbejade lọ si awọn orilẹ-ede to ju 50 lọ ni pataki lati Amẹrika, Russia, UK, Kuwait, Egypt, Iran,
Tọki, Jordani, ati bẹbẹ lọ.
Q13: Bawo ni MO ṣe le gba diẹ ninu awọn ayẹwo?
A: Awọn ayẹwo kekere ni ile itaja ati pe o le pese awọn ayẹwo fun ọfẹ. Catalgue wa, julọ
awọn ilana a ni awọn apẹẹrẹ ti o ṣetan ni iṣura. Awọn ayẹwo adani yoo gba nipa 5-7days.
Q14: Kini ifijiṣẹ?
A: Akoko ifijiṣẹ aṣẹ ayẹwo jẹ awọn ọjọ 5-7. Awọn ibere apoti jẹ nipa awọn ọjọ 15-20.
Q15: Kini ohun elo nipa Awọn ọja rẹ?
A: 1.elevator enu / agọ tabi ati escalator ká ẹgbẹ-odi.
2.Odi cladding inu tabi ita ipade yara / ounjẹ.
3.Facade nigba ti cladding lori nkankan, bi awọn ọwọn ni ibebe.
4. Aja ni fifuyẹ. 5.Decorative iyaworan ni diẹ ninu awọn Idanilaraya ibi.
Q16: Bawo ni pipẹ ti O le ṣe iṣeduro fun Ọja Yi / Pari?
A: Atilẹyin awọ fun diẹ sii ju ọdun 10 lọ. Ijẹrisi didara awọn ohun elo atilẹba le
wa ni pese.
