1.4016 (430) Iphepha kunye nePleti

Inkcazelo emfutshane:

Ukutyeba: 0.15mm-3.00mm ( Kuqengqeleke Kubanda)

3.00mm-8.00mm ( I-Hot Rolled)

Ububanzi: 1000mm, 1219mm, 1250mm, 1500mm, 1800mm, 2000mm, njl.

Ubude: 2000mm, 2440mm, 2500mm, 3000mm, 3048mm, 5800mm, 6000mm okanye njengeemfuno zabathengi


  • FOB ixabiso:US $ 0.5 - 9,999 / Iqhekeza
  • Min.Ubungakanani boMyalelo:100 Iqhekeza / Iingceba
  • Ukubonelela ngezakhono:10000 Iqhekeza/Amaqhekeza ngenyanga
  • Izibuko:Shanghai, Ningbo, Shenzhen
  • Ixesha lokuzisa:7-10 iintsuku emva kokuqinisekisa umyalelo
  • Imvelaphi:eTshayina
  • Ixesha lokuhlawula:T/T , L/C
  • Umgangatho:ASTM,AISI,SUS,JIS,EN,DIN,GB, ASME, njl
  • Isila:Pocso/ Tisco/ Lisco/ Jisco/ Bao intsimbi/ H Wang
  • Iinkcukacha zeMveliso

    Inkcazo yobuGcisa

    Ipakethe yeMveliso kunye noThutho

    Intshayelelo yeNkampani

    Umbuzo & neempendulo

    Iithegi zeMveliso

    Intsimbi engatyiwayo – iFerritic –1.4016 (430) Iphepha kunye nePleti

    1.4016 (430) Iphepha kunye nePleti

    Uhlobo lwensimbi engenasici 1.4016 lukwabizwa ngokuba yibakala430. Uhlobo430insimbi engenasici idibanisa ukuxhathisa okulungileyo kokubola kunye nokwakheka okulungileyo kunye ne-ductility.
    Lithafa leChromium, elingaqiniyo, elingaqiniyo nelinekhwalithi egqibeleleyo.
    IBanga lama-430 nalo linokuxhathisa okugqwesileyo kuhlaselo lwe-nitric, nto leyo eyenza ukuba ifaneleke ngokufanelekileyo ukusetyenziswa kwizicelo zeekhemikhali. Izicelo ezithandwa kakhulu kwi-430 kwizixhobo zasekhaya kunye ne-decorative trim.


    Ukuqulunqwa kwemichiza

    1.4016 Intsimbi

    Chemical Element % Ngoku
    Ikhabhoni (C) 0.0 - 0.08
    I-Chromium (Cr) 16.00 - 18.00
    IManganese (Mn) 0.0 - 1.00
    Isilicon (Si) 0.0 - 1.00
    Iphosphorus (P) 0.0 - 0.04
    Isulfure (S) 0.0 - 0.02
    Intsimbi (Fe) Ibhalansi

    Iipropati

    Impahla Ephathekayo Ixabiso
    Ukuxinana 7.75 g/cm³
    Indawo yokunyibilika 1425-1510 °C
    Ukwandiswa kweThermal 10.4 x10^-6 /K
    Imodyuli yeElasticity 200 GPA
    I-Thermal Conductivity 23.9 W/mK
    Ukuxhathisa koMbane 0.060 x10^-6 Ω .m

    Ishiti – Ukuya kuthi ga kwi-8mm ubukhulu

    IPropati yoomatshini Ixabiso
    Ubungqina boxinzelelo 260 Min MPa
    Tensile strength 450 - 600 MPa
    Ubude A50 mm 20 imiz %

    Icwecwe – Ngaphezu kwe-8mm ukuya kwi-13.5mm / Etyebileyo

    IPropati yoomatshini Ixabiso
    Ubungqina boxinzelelo 240 Min MPa
    Tensile strength 450 - 600 MPa
    Ubude A50 mm Imizuzu eyi-18

    Icwecwe – Ngaphezulu kwe-13.5mm ukuya kwi-25mm Ukutyeba

    IPropati yoomatshini Ixabiso
    Ubungqina boxinzelelo 240 Min MPa
    Tensile strength 430 - 630 MPa
    Ubude A50 mm 20 imiz %

    Ukutyunjwa kwe-alloy

    I-Stainless Steel Grade 1.4016/430 nayo ingqinelana nezi zikhundla zilandelayokodwa isenokungafani ngokuthe ngqo:

    I-UNS S43000

    BS 430S17

    EN60

     


    Iifomu ezinikezelweyo

     

    • Iphepha
    • Ukuhluba
    • Umbhobho
    • Ibha
    • Ukufakwa kunye neeFlanges
    • Umbhobho
    • Ipleyiti

    Usetyenziso

    430 intsimbi engatyiwa ngokuqhelekileyo isetyenziswa apha:

     

    Iisinki ezinexabiso eliphantsi

    I-decorative trim

    IiMpahla eziMhlophe & eziBrown (oomatshini bokuhlamba, oomatshini bokuhlamba izitya, abapheki

    Iifriji

    Isitovu element sixhasa

    Izixhobo zenzululwazi

    Izibophelelo

    Flue linings


    Ukunyangwa kokuMhlwa

    Uhlobo lwe-430 yensimbi engenasici inokumelana nokugqwala okuhle kwiindidi ezininzi zeendaba ezibandakanya i-nitric acid kunye nezinye iiasidi eziphilayo. Uxhathiso lwe-corrosion yohlobo lwe-430 lulungile xa inomgangatho ophucuke kakhulu. Njengakwamanye amabakala e-ferritic, ukuchasana noxinzelelo lwe-corrosion cracking kuphezulu kakhulu.


  • Ngaphambili:
  • Okulandelayo:

  • IBanga leMathiriyeli

    Izinto eziphathekayo Umgangatho we-ASTM A240 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 40009
    Umgangatho we-ASTM A480 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 316HHH 310HHH 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31225, S31225, S31225 S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S322054, S32205 S32520, S32750, S32760, S32900, S32906, S32950, ​​S32974
    I-JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630  
    Umgangatho we-JIS G4305 SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS301SS3012S SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS33USS, SUS316J62J SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LJ3, SUS4, SUS4, SUS404, SUS404, SUS430LJ3, SUS4, S304, SUS404L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A

    Ukucaciswa kweMveliso

    Gqiba Ukutyeba Iimpawu Usetyenziso
    Inombolo 1 3.0mm~50.0mm Igqitywe ngokushushumbisa, i-annealing kunye ne-pickling, ebonakaliswe ngumphezulu omhlophe ocoliweyo Izixhobo zeshishini lemichiza, iitanki zeShishini
    No. 2B 0.3mm ~ 6.0mm Kugqitywe unyango ubushushu, pickling emva ebandayo rolling, kulandele ulusu pass line ukuba liqaqambe ngakumbi kwaye agudileyo ubuso Izixhobo zezoNyango eziSebenzisiweyo, iTableware
    INombolo ye-BA (Eqaqambileyo eAnealed) 0.5mm ~ 2.0mm Ukunyangwa kobushushu obuqaqambileyo emva kokuqengqeleka okubandayo Ikhitshi yekhitshi, ikhitshi, injongo yezakhiwo
    Inombolo yesi-4 0.4mm ~ 3.0mm Ukucoca ngeNombolo ye-150 ukuya kwi-No.180 ye-mesh abrasives. Ukugqiba okudumileyo Amaziko okwenziwa kobisi kunye nokutya, izixhobo zesibhedlele, ibhafu
    Inombolo yesi-8 0.5mm ~ 2.0mm Umphezulu onjengesipili obonakalisayo ngokugudiswa ngezithinteli ezicolekileyo ngaphezu kwe-800 mesh IReflector, isipili, Ngaphakathi-Uhombiso lwangaphandle lolwakhiwo
    HL(Umgca weNwele) 0.4mm ~ 3.0mm Igqitywe ngokucolwa ngokuqhubekayo komgca Iinjongo zezakhiwo, izitepusi ezizihambelayo, izithuthi zasekhitshini

    Ukuqulunqwa kwemichiza

    IBanga

    C

    Si

    Mn

    P

    S

    Cr

    Ni

    Mo

    Ti

    N

    Cu

    Nb

    201

    ≤0.15

    ≤1.0

    5.50-7.50

    ≤0.05

    ≤0.03

    16.00-18.00

    3.50-5.50

    -

    -

    0.05-0.25

    -

    -

    202

    ≤0.15

    ≤1.0

    7.50-10.00

    ≤0.05

    ≤0.03

    17.00-19.00

    4.00-6.00

    -

    -

    0.05-0.25

    -

    -

    301

    ≤0.15

    ≤1.0

    ≤2.0

    ≤0.045

    ≤0.03

    16.00-18.00

    6.00-8.00

    -

    -

    ≤0.1

    -

    -

    302

    ≤0.15

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    8.00-10.00

    -

    -

    ≤0.1

    -

    -

    303

    ≤0.15

    ≤1.0

    ≤2.0

    ≤0.2

    ≥0.15

    17.00-19.00

    8.00-10.00

    ≤0.6

    -

    ≤0.1

    -

    -

    304

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    8.00-10.00

    -

    -

    -

    -

    -

    304L

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    8.00-10.00

    -

    -

    -

    -

    -

    304H

    0.04-0.1

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    8.00-10.00

    -

    -

    -

    -

    -

    304N

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    8.00-10.00

    -

    -

    0.10-0.16

    -

    -

    304J1

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    6.00-9.00

    -

    -

    -

    1.00-3.00

    -

    305

    ≤0.12

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    10.50-13.00

    -

    -

    -

    -

    -

    309S

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    22.00-24.00

    12.00-15.00

    -

    -

    -

    -

    -

    310S

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    24.00-26.00

    19.00-22.00

    -

    -

    -

    -

    -

    316

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-18.00

    10.00-14.00

    2.00-3.00

    -

    -

    -

    -

    316L

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-18.00

    12.00-15.00

    2.00-3.00

    -

    -

    -

    -

    316H

    ≤0.1

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-18.00

    10.00-14.00

    2.00-3.00

    -

    -

    -

    -

    316N

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-18.00

    10.00-14.00

    2.00-3.00

    -

    0.10-0.16

    -

    -

    316Ti

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-19.00

    11.00-14.00

    2.00-3.00

    ≥5C

    -

    -

    -

    317L

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    11.00-15.00

    3.00-4.00

    -

    -

    -

    -

    321

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    9.00-12.00

    -

    5C-0.7

    -

    -

    -

    347

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    9.00-12.00

    -

    -

    -

    -

    10C-1.10

    347H

    ≤0.1

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    9.00-12.00

    -

    -

    -

    -

    8C-1.10

    2205

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    21.00-24.00

    4.50-6.50

    2.50-3.50

    -

    0.08-0.20

    -

    -

    2507

    ≤0.03

    ≤0.8

    ≤1.2

    ≤0.035

    ≤0.02

    24.00-26.00

    6.00-8.00

    3.00-5.00

    -

    0.24-0.32

    -

    -

    904L

    ≤0.02

    ≤1.0

    ≤2.0

    ≤0.045

    ≤0.03

    19.00-23.00

    23.00-28.00

    4.00-5.00

    -

    -

    1.00-2.00

    -

    C276

    ≤0.02

    ≤0.05

    ≤1.0

    -

    -

    14.00-16.50

    Okunye

    -

    -

    -

    -

    -

    Monel400

    ≤0.3

    ≤0.5

    ≤2.0

    -

    ≤0.024

    -

    ≥63

    -

    -

    -

    28-34

    -

    409L

    ≤0.03

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    17.00-19.00

    -

    -

    -

    -

    -

    -

    410

    ≤0.15

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    11.50-13.50

    -

    -

    -

    -

    -

    -

    410L

    ≤0.03

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    11.50-13.50

    -

    -

    -

    -

    -

    -

    420J1

    0.16-0.25

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    12.00-14.00

    -

    -

    -

    -

    -

    -

    420J2

    0.26-0.40

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    12.00-14.00

    -

    -

    -

    -

    -

    -

    430

    ≤0.12

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    -

    -

    -

    -

    -

    436L

    ≤0.025

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-19.00

    -

    -

    -

    -

    -

    -

    439

    ≤0.03

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    -

    -

    -

    -

    -

    440A

    0.60-0.75

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    ≤0.75

    -

    -

    -

    -

    440B

    0.75-0.95

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    ≤0.75

    -

    -

    -

    -

    440C

    0.95-1.2

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    ≤0.75

    -

    -

    -

    -

    441

    ≤0.03

    0.2-0.8

    ≤0.7

    ≤0.03

    ≤0.015

    17.50-18.50

    -

    ≤0.5

    0.1-0.5

    ≤0.025

    -

    0.3+3C-0.9

    Thinazisonga iimveliso zensimbi ezingenasici ngephepha elichasayo kunye nentsimbi yentsimbi ukukhusela umonakalo.

    Iileyibhile zokuchongwa ziphawulwe ngokwemigaqo esemgangathweni okanye ngokwemiyalelo yomthengi.

    Ukupakishwa okukhethekileyo kuyafumaneka ngokwemfuno yomthengi.

    Ipakethe yekhoyili yensimbi engenaStainless

    Iphakheji yekhoyili yensimbi engenasici yecepheus (1)

    Iphakheji yekhoyili yensimbi engenasici yecepheus (2)

     

    Iphepha leNsimbi elingenaStainless / iPakeji yePleyiti yentsimbi engatyiwa

    cepheus steel stainless sheet package (3)

    ipleyiti yentsimbi ye-cepheus 1_副本

     

    Ipakethe yeStrip Strip

    Iphakheji ye-cepheus yentsimbi engenanto (5)

    Ipakethe yokuThunyelwa

    Ukuthunyelwa kwentsimbi ye-Cepheus (1)

    Ukuthunyelwa kweNtsimbi ye-Cepheus (2)

    Ukuthunyelwa kweNsimbi engatyiwa yi-Cepheus (3)

    Inkampani yethu izinze eWuxi, iqokelela isixeko sesinyithi esingenasici eTshayina.

    Sisebenza ngokukhethekileyo kwiikhoyili ezingenasici, amashiti kunye nepleyiti, umbhobho wentsimbi engatyiwa kunye nezinto zokufakelwa, iityhubhu zentsimbi, kunye neemveliso ze-aluminiyam kunye neemveliso zobhedu.

    Iimveliso zethu ziye zanconywa kakhulu ngabathengi bethu abavela eYurophu, eMelika, kuMbindi Mpuma, eAfrika nakuMzantsi-mpuma Asia. Siza kubonelela ngeemveliso ezikhuphisanayo kunye nenkonzo ebanzi kubathengi.

    I-Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 4, 1, 3, 316, 4, 3, 4 420, 430, 430F, 440, 440c,

    IBanga le-alloy: iMonel, i-Inconel, iHastolley, iDuplex, iSuper Duplex, iTitanium, iTantalum, iNtsimbi enesantya esiphezulu, intsimbi ethambileyo, iAluminium, intsimbi yentsimbi, iCarbon Steel, iNickel Alloys

     

    Kwimo ye: IiBar eziRound, iiBar zesikwere, ii-Hexagonal Bars, ii-Flat Bars, ii-engile, ii-Channels, iiProfayili, iiNcingo, iiNcingo zocingo, ii-Sheets, iiPleti, iMibhobho engenamthungo, i-ERW Pipes, iiFlanges, iiFittings, njl.

    wuxi cepheus steel stainless (1)

     

    wuxi cepheus steel stainless (5)

    wuxi cepheus intsimbi engatyiwayo (4)

    wuxi cepheus intsimbi engatyiwayo (3)

     

    wuxi cepheus steel stainless (2)

     

    Q1: Yintoni i-stainless?

    A: I-stainless ithetha ukuba akukho manqaku kumphezulu wentsimbi, okanye uhlobo lwentsimbi engonakaliswanga ngumoya okanye ngamanzi kwaye engatshintshi umbala, engenabala, ekwazi ukumelana nokubola, ukurusa, isiphumo sokubola kweekhemikhali.

    I-Q2: Ngaba i-stainless ithetha ukuba akukho ukugqwala?

    IMPENDULO: Hayi, i-stainless ithetha ukuba akukho lula ukungcola okanye ukurusa, inamandla akhethekileyo okuxhathisa ibala, ukurusa kunye nokuhlwa.

    I-Q3: Ngaba unikezela ngamashiti ensimbi engenasici?

    A: Ewe, sinikezela ngeentlobo ezahlukeneyo zeshiti zensimbi ezingenasici, ezinobubanzi obusuka kwi-0.3-3.0mm. kunye nokugqiba ezahlukeneyo.

    I-Q4: Ngaba uyayamkela inkonzo yokusika ukuya kubude?

    A: Ewe, ukwaneliseka kwabathengi yeyona nto iphambili kuthi.

    Q5: Ukuba ndineodolo encinci, uyayamkela iodolo encinci?

    A: Akuyongxaki, inkxalabo yakho yinkxalabo yethu, amanani amancinci amkelwe.

    I-Q6: Ungaqinisekisa njani umgangatho wemveliso yakho?

    A: Okokuqala, kwasekuqaleni, sele siphumeze umoya ezingqondweni zabo, obo bubomi obusemgangathweni, abasebenzi bethu abaqeqeshiweyo kunye nabasebenzi baya kulandela inyathelo ngalinye de iimpahla zipakishwe kakuhle kwaye zithunyelwe ngaphandle.

    I-Q7: Ngaba uya kupakisha iimveliso?

    A: Abantu abachwephesha benza ukupakisha abaqeqeshiweyo, sineentlobo ezahlukeneyo zokupakisha ozikhethelayo kubathengi, uqoqosho okanye olungcono.

    I-Q8: Yintoni ekufuneka uyazi kumthengi ngaphambi kokucaphula okuchanekileyo?

    A: Ukufumana ikowuteshini echanekileyo, kufuneka sazi ibakala, ubukhulu, ubukhulu, ukugqiba komphezulu, umbala kunye nobungakanani beodolo yakho, kunye nendawo eziya kuyo iimpahla. Ulwazi lwemveliso elungiselelweyo luya kufuneka ngakumbi, njengokuzoba, uyilo kunye nesicwangciso. Emva koko siya kubonelela ngekowuteshini ekhuphisanayo kunye nolwazi olungentla.

    I-Q9: Loluphi uhlobo lwexesha lokuhlawula olivumayo?

    A: Siyayamkela i-T/T, i-West union, i-L/C.

    I-Q10: Ukuba lo ngumyalelo omncinci, ngaba uya kuhambisa iimpahla kwi-arhente yethu?

    A: Ewe, sizalelwe ukusombulula iingxaki zabathengi bethu, siya kufumana iimpahla ngokukhuselekileyo kwindawo yokugcina iarhente yakho kwaye sikuthumelele imifanekiso.

    Q11: Ngaba wenza ishiti elicaba? Ndifuna ukwenza ulwakhiwo lweprojekthi yam entsha.

    A: Hayi, sivelisa ubukhulu becala isinyithi esingenasici esisicaba sonyango, kwangaxeshanye, senza imveliso egqityiweyo yentsimbi egqityiweyo ngokomzobo kunye nesicwangciso somthengi, igcisa lethu liya kukhathalela abanye.

    Q12: Zingaphi iicoutries osele uzithumele ngaphandle?
    A: Ithunyelwa kumazwe angaphezu kwama-50 ikakhulu isuka eMelika, eRashiya, eUK, eKuwait, eYiphutha, eIran,
    Turkey, Jordan, njl.
    Q13: Ndingazifumana njani iisampuli?
    A: Iisampuli ezincinci kwivenkile kwaye zinokubonelela ngeesampuli simahla. I-Catalgue iyafumaneka, uninzi
    iipatheni esinazo iisampulu esele zilungile kwisitokhwe. Iisampuli ezenziwe ngokwezifiso ziya kuthatha malunga ne-5-7days.
    Q14: Yintoni ukuhanjiswa?
    A: Ixesha lokuhanjiswa kwesampula yi-5- 7 iintsuku. Iiodolo zesikhongozeli malunga neentsuku ze-15-20.

    Q15: Sithini isicelo malunga neeMveliso zakho?
    A: Umnyango we-elevator / i-cabin okanye kunye nodonga olusecaleni lwe-escalator.
    2.Izigqubuthelo zodonga ngaphakathi okanye ngaphandle kwegumbi lentlanganiso/ indawo yokutyela.
    3.I-Facade xa ugqume phezu kwento ethile, njengeekholamu kwindawo yokwamkela iindwendwe.
    4.Isilingi kwivenkile enkulu. 5.Decorative umzobo kwezinye iindawo zokuzonwabisa.
    I-Q16: Ungayiqinisekisa ixesha elingakanani le Mveliso / ukugqiba?
    A: Isiqinisekiso sombala ngaphezu kweminyaka eyi-10. Isiqinisekiso somgangatho wemathiriyeli yoqobo sinakho
    kubonelelwa.

    Iimveliso ezinxulumeneyo