I-Super Duplex Steel S32750 / S32760 Ishidi namaPlates
Incazelo emfushane:
I-Super Duplex Steel S32750 / S32760 Ishidi namaPlates
I-Super Duplex Steel S32750 / S32760 Ishidi nokucaciswa kwePlate
Okujwayelekile : ASTM/ASME A240/SA240
Usayizi: 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Ubukhulu: 0.1mm ukuya ku-12 mm Thk
Ifomu: Amakhoyili, Amafoyili, Amaroli, Ishidi Elingenalutho, Ishidi Leshimu, Umdweshu, Amafulethi, Angenalutho (Indilinga), Indandatho (I-Flange)
Qeda : Ipuleti eligoqiwe elishisayo (HR), ishidi eligoqiwe elibandayo (CR), 2B, 2D, BA NO(8), iSATIN (Ihlangane nePlastiki Coated)
Ukuqina: I-Soft, Hard, Half Hard, Quarter Hard, Spring Hard njll.
Amabanga alinganayo e-Super Duplex S32750 / S32760 Sheet and Plate
| IZINGA | I-WERKSTOFF NR. | I-UNS |
| I-Super Duplex | 1.4410 | S32750 / S32760 |
I-Super Duplex Steel 32750 / 32760 Sheet & Plate Chemical Composition
| Isici | I-Super Duplex S32750 | I-Super Duplex S32760 |
| C | 0.030 ubuningi | 0.05 ubuningi |
| Mn | 1.20 ubuningi | 1.00 ubuningi |
| Si | 0.80 ubuningi | 1.00 ubuningi |
| P | 0.035 ubuningi | 0.030 ubuningi |
| S | 0.020 ubuningi | 0.010 ubuningi |
| Cr | 24-26 | 24-26 |
| Mo | 3-5 | 3-4 |
| Ni | 6 – 8 | 6 – 8 |
| N | 0.24 – 0.32 | 0.20 - 0.30 |
| Fe | 58.095 imiz | 57.61 imiz |
Izakhiwo Zemishini ye-Super Duplex 32750 / 32760 Ishidi nePlate
| Isici | I-Super Duplex 32750 / 32760 |
| Ukuminyana | 7.8 g/cm3 |
| I-Melting Point | 1350 °C (2460 °F) |
| Amandla Okuqina | isiqephu - 116 |
| Amandla Esivuno (0.2%Offset) | ibe -80 |
| Ukwelula | 15 % |
Izinhlobo zeSuper Duplex Steel S32750 / S32760 AmaSpredishithi namaPlates
I-Super Duplex Steel S32750 / S32760 Sheet
2b finish Super Duplex 32760 Sheet
#4 finish Super Duplex S32750 Sheet
Sika usayizi Super Duplex S32760 Sheet
Ishidi le-A240 Super Duplex 32750
I-WERKSTOFF NR. 1.4410 Ishidi
I-Super Duplex Steel 32750 Mirror Finish Sheet
#8 Qeda i-Super Duplex S32760 Sheet
4 Ibhulashi Qeda i-Super Duplex 32750 Sheet
Ishidi le-Super Duplex S32760
I-Super Duplex Steel S32750 / S32760 Plate
Sika usayizi we-Super Duplex S32760 Plate
I-Super Duplex Steel 32750 Mirror Finish Plate
I-UNS S32750 Plate
I-WERKSTOFF NR. 1.4410 Ipuleti
2b finish Super Duplex S32760 Plate
#8 Qeda i-Super Duplex 32750 Plate
4 Ibhulashi Qeda i-Super Duplex 32760 Plate
I-Super Duplex S32750 Plate
I-A240 Super Duplex 32760 Plate
#4 qeda i-Super Duplex 32750 Plate
I-Super Duplex 32750/32760 Ishidi/Amapuleti Eligoqiwe Okubandayo
I-WERKSTOFF NR. 1.4410 Ishidi Eligoqiwe Elibandayo & Amapuleti
#4 qeda i-Super Duplex S32760 Cold Rolled Sheet & Plates
I-A240 Super Duplex Steel 32760 Ishidi Eligoqiwe Elibandayo & Amapuleti
I-UNS S32750 Ishidi Eligoqiwe Elibandayo & Amapuleti
I-Super Duplex Steel S32750 2b iqeda Ishidi Eligoqiwe Elibandayo & Amapuleti
Thumela i-Polish Super Duplex Steel 32750 CR Sheet & Plates
I-Super Duplex Steel S32750 Ishidi Eligoqiwe Elibandayo & Amapuleti
I-Super Duplex 32750/32760 Ishidi/Amapuleti agingqelwe ashisayo
Okushisiwe Okugqitshiwe okungu-#4 kuqedile I-Super Duplex S32750 Ishidi nama-Plate
I-Super Duplex Steel S32750 2b iqeda Ishidi Elijingiwe Elishisayo & Amapuleti
I-A240 Super Duplex Steel 32760 Ishidi Elijingiwe Elishisayo Namapuleti
I-UNS S32750 Ishidi Eligoqiwe Elishisayo Nezingcweti
Thumela i-Polish Super Duplex Steel 32760 HR Sheet & Plates
I-Super Duplex Steel S32760 Ishidi Elijingiwe Elishisayo Namapuleti
I-WERKSTOFF NR. 1.4410 Ishidi Elijingiwe Elishisayo Nezingcwecwe
Ibanga lezinto ezibonakalayo
| Okubalulekile | I-ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 43S 409 |
| I-ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 316HH 310, 310H HC 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31225, S31226, S3122 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32205 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| I-JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| I-JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS301S, SUS301S SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS33USSL62JS SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LJ3, SUS4, SUS40, S30, S30, S304, S30 LUS4 SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Ukucaciswa Komkhiqizo
| Qeda | Ubukhulu | Izici | Izinhlelo zokusebenza |
| No. 1 | 3.0mm ~ 50.0mm | Iqedwa ngokuginqika okushisayo, i-annealing kanye ne-picling, ebonakala ngendawo ekhethiwe emhlophe | Imishini yemboni yamakhemikhali, amathangi ezimboni |
| No. 2B | 0.3mm ~ 6.0mm | Iqedwa ukwelashwa ukushisa, pickling ngemva rolling abandayo, kulandele isikhumba pass line ukuze likhanye ngaphezulu futhi ebusweni bushelelezi | I-General Application Medical Instruments, I-Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Ukwelashwa kokushisa okukhanyayo ngemva kokugoqa okubandayo | Isitsha sasekhishini, ikhishi, inhloso yezakhiwo |
| No. 4 | 0.4mm ~ 3.0mm | Ukupholisha ngeNo. 150 kuya ku-No.180 mesh abrasives. Iziqephu ezidume kakhulu | Izinsiza zokucubungula ubisi nokudla, Izinsiza Zesibhedlela, Ubhavu wokugeza |
| No. 8 | 0.5mm ~ 2.0mm | Indawo ekhanyayo efana nesibuko ngokupholishwa ngama-abrasives acolekile angaphezu kwama-mesh angu-800 | I-Reflector, i-Mirror, i-Interior-Ingaphandle umhlobiso wokwakha |
| HL(Umugqa Wezinwele) | 0.4mm ~ 3.0mm | Kuqedwe ngokupholisha komugqa okuqhubekayo | Izinjongo zezakhiwo, izitebhisi ezizihambelayo, izimoto zasekhishini |
Ukwakheka Kwamakhemikhali
| Ibanga | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304j1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3,50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Okunye | - | - | - | - | - |
| I-Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420j1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420j2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0,75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Thinabopha imikhiqizo yensimbi engagqwali ngephepha elilwa nokugqwala kanye namasongo ensimbi ukuze uvimbele umonakalo.
Amalebula okuhlonza amakwe ngokuya ngemininingwane ejwayelekile noma imiyalelo yekhasimende.
Ukupakisha okukhethekile kuyatholakala ngokwemfuneko yekhasimende ngalinye.
Iphakheji Yekhoyili Yensimbi Engagqwali
Ishidi Lensimbi Engagqwali / Iphakheji Lepuleti Lensimbi Engagqwali
Iphakheji ye-Stainless Steel Strip
Iphakheji Lokuthumela
Inkampani yethu izinze eWuxi, iqoqa idolobha lezimboni zensimbi engagqwali eChina.
Sasebenza ngokukhethekile ngamakhoyili angagqwali, amashidi kanye nepuleti, ipayipi nokufakwa kwensimbi engagqwali, amashubhu ensimbi engagqwali, kanye nemikhiqizo ye-aluminium nemikhiqizo yethusi.
Imikhiqizo yethu iye yanconywa kakhulu ngamakhasimende ethu avela eYurophu, eMelika, eMpumalanga Ephakathi, e-Afrika naseNingizimu-mpumalanga ye-Asia. Sizohlinzeka ngemikhiqizo encintisanayo kanye nesevisi ephelele kumakhasimende.
Ibanga Lensimbi Engagqwali: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 4, 1, 3, 316, 316, 4, 6, 3, 316 420, 430, 430F, 440, 440c,
Ibanga le-alloy :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
Ngendlela: Amabha Ajikelezayo, Amabha Ayisikwele, Amabha Anezinhlangothi, Amabha Ayisicaba, Ama-engeli, Amashaneli, Amaphrofayili, Izintambo, Izinduku Zocingo, Amashidi, Amapuleti, Amapayipi Angenamthungo, Amapayipi E-ERW, Ama-Flanges, Okokufakwayo, njll.
Q1: Yini i-stainless?
IMP: I-stainless isho ukuthi akukho zimpawu endaweni yensimbi, noma uhlobo lwensimbi olungalimazi umoya noma amanzi futhi olungashintshi umbala, olungenabala, olumelana nokungcoliswa, ukugqwala, ukugqwala kwamakhemikhali.
Q2: Ingabe i-stainless isho ukuthi akukho ukugqwala?
IMP: Cha, ibala lisho ukuthi akulula ukuthi libe namabala noma ukugqwala, linamandla akhethekile okumelana namabala, ukugqwala kanye nokugqwala.
Q3: Ingabe uhlinzeka ngamashidi ensimbi engagqwali?
A: Yebo, sihlinzeka ngezinhlobo ezahlukene zamashidi ensimbi engagqwali, anobubanzi obusuka ku-0.3-3.0mm. futhi emaphethelweni ahlukene.
Q4: Ingabe uyayamukela isevisi yokusika ukuze ubude?
IMP: Impela, ukwaneliseka kwekhasimende yinto yethu ehamba phambili.
Q5: Uma ngine-oda elincane, uyalamukela i-oda elincane?
A: Akuyona inkinga, ukukhathazeka kwakho ukukhathazeka kwethu, amanani amancane ayamukelwa.
Q6: Ungaqinisekisa kanjani ikhwalithi yomkhiqizo wakho?
IMP: Okokuqala, zisuka nje, sesivele sifake umoya ezingqondweni zabo, okungukuthi ikhwalithi yokuphila, abasebenzi bethu abangochwepheshe kanye nezinduku bazolandela zonke izinyathelo kuze kube yilapho izimpahla zipakishwa kahle futhi zithunyelwa ngaphandle.
Q7: Ingabe uzopakisha imikhiqizo?
A: Abantu abangochwepheshe benza ukupakisha okuchwepheshile, sinezinhlobo ezahlukene zokupakisha ozikhethela kumakhasimende, elomnotho noma elingcono.
Q8: Yini okudingeka uyazi kukhasimende ngaphambi kwekhotheshini enembile?
IMP: Ukuze uthole ikhotheshini enembile, sidinga ukwazi ibanga, ukujiya, ubukhulu, ukuphela kwendawo, umbala kanye nenani le-oda lakho, kanye nendawo okuyiwa kuyo impahla. Ulwazi lomkhiqizo owenziwe ngokwezifiso luzodingeka kakhulu, njengokudweba, isakhiwo nohlelo. Ngemuva kwalokho sizonikeza ikhotheshini yokuncintisana nolwazi olungenhla.
Q9: Hlobo luni lwesikhathi sokukhokha owamukelayo?
A: Samukela i-T/T, i-West union, i-L/C.
Q10: Uma leli kuyi-oda elincane, ungaletha izimpahla kumenzeli wethu?
IMPENDULO: Yebo, sizalelwe ukuxazulula izinkinga zamakhasimende ethu, sizothola izimpahla ngokuphephile endaweni egcina impahla yomenzeli wakho futhi sikuthumelele izithombe.
Q11: Ingabe wenza ishidi eliyisicaba? Ngifuna ukwenza ukwakheka kwephrojekthi yami entsha.
A: Cha, sikhiqiza ikakhulukazi insimbi engagqwali yokwelashwa kweshidi eliyisicaba, ngesikhathi esifanayo, senza ngokwezifiso umkhiqizo oqediwe wensimbi njengomdwebo nohlelo lwekhasimende ngalinye, uchwepheshe wethu uzonakekela okunye.
Q12: Mangaki ama-coutries osuwathengisile?
A: Ithunyelwa emazweni angaphezu kuka-50 ikakhulukazi eMelika, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, njll.
Q13: Ngingawathola kanjani amasampuli?
A: Amasampuli amancane esitolo futhi angahlinzeka ngamasampula mahhala. I-Catalgue iyatholakala, iningi
amaphethini sinamasampula alungile esitokweni. Amasampula enziwe ngokwezifiso azothatha cishe izinsuku ezingama-5-7.
Q14: Kuyini ukulethwa?
A: Isikhathi sokulethwa kwe-oda lesampula izinsuku ezi-5-7. Ama-oda wesitsha cishe izinsuku eziyi-15-20.
Q15: Luyini uhlelo lokusebenza ngeMikhiqizo yakho?
A: Umnyango we-elevator/cabin noma nodonga oluseceleni lwezitezi ezizihambelayo.
2.Udonga ngaphakathi noma ngaphandle kwegumbi/indawo yokudlela.
3.I-Facade uma uvala into ethile, njengamakholomu endaweni yokwamukela izivakashi.
4.Ceiling in the supermarket. 5.Imidwebo yokuhlobisa kwezinye izindawo zokuzijabulisa.
Q16: Ungaqinisekisa isikhathi esingakanani ngalo Mkhiqizo/Uqede?
A: Isiqinisekiso sombala iminyaka engaphezu kwe-10. Isitifiketi sekhwalithi yezinto zoqobo singa
ukuhlinzekwa.
