I-C5210 Qsn 8 – 0.3 I-Standard Alloy Foil / I-Bronze Foil Enobubanzi obukhulu obungu-650mm
Incazelo emfushane:
I-C5210 Qsn 8 – 0.3 I-Standard Alloy Foil / I-Bronze Foil Enobubanzi obukhulu obungu-650mmC5210(Qsn 8 – 0.3) I-Foil Yethusi Ejwayelekile Enobubanzi Obukhulu Buka-650mm
Incazelo:
Ama-bronzes ngokuvamile angama-alloy ductile kakhulu. Uma kuqhathaniswa, ama-bronze amaningi aqinile kakhulu kune-cast iron. I-bronze ngokuvamile i-oxidize kuphela ngaphandle; uma ungqimba lwe-copper oxide (ekugcineni luba yi-copper carbonate) lwakhiwe, insimbi engaphansi ivikelekile ekugqwaleni okuqhubekayo. Nokho, uma ama-copper chloride akheka, i-corrosion-mode ebizwa ngokuthi “isifo sethusi” ekugcineni izoyibhubhisa ngokuphelele. Ama-alloys asekelwe ethusi anamaphuzu aphansi okuncibilika kunensimbi noma i-iron, futhi akhiqizwa kalula ngezinsimbi zawo. Ngokuvamile aminyene ngamaphesenti angu-10 kunensimbi, nakuba ama-alloys asebenzisa i-aluminium noma i-silicon angase abe ngaphansi kancane. Ama-bronze athambile futhi abuthakathaka kunensimbi—iziphethu zethusi, ngokwesibonelo, aziqinile kangako (ngakho zigcina amandla amancane) ngenqwaba efanayo. I-bronze imelana nokugqwala (ikakhulukazi ukugqwala kwamanzi olwandle) kanye nokukhathala kwensimbi ngaphezu kwensimbi futhi iyikhondatha engcono yokushisa nogesi kunezinsimbi eziningi. Izindleko zama-alloys esisekelo se-copper ngokuvamile ziphakeme kunezinsimbi kodwa ziphansi kunalezo ze-nickel-base alloys.
I-Copper nama-alloys ayo anezinhlobonhlobo ezinkulu zokusetshenziswa ezibonisa izici zayo ezihlukahlukene zomzimba, zemishini, namakhemikhali. Ezinye izibonelo ezivamile ukuqhutshwa kukagesi okuphezulu kwethusi elimsulwa, izakhiwo ezingqubuzana kancane zethusi (ithusi elinomthamo omningi womthofu— 6-8%), izimfanelo ezizwakalayo zensimbi yethusi (20% ithini, 80% yethusi) , kanye nokumelana nokugqwala kwamanzi olwandle ama-alloys amaningi ethusi.
Iphoyinti lokuncibilika lethusi liyahlukahluka kuye ngesilinganiso sezingxenye zengxubevange futhi licishe libe ngu-950 °C (1,742 °F). Ithusi lingase lingabi-nozibuthe, kodwa ama-alloy athile aqukethe insimbi noma i-nickel angase abe nezakhiwo kazibuthe.
Ngenxa yefoyili yethusi inokusebenza okuyingqayizivele, iye yasetshenziswa kabanzi njengezinto ezinqanda ukuhuzuka ezingxenyeni zemishini kagesi, ukusakazwa kokuqina komoya okuphezulu, izixhumi, izikhonkwane nezinsimbi ezinemba okuphezulu. Inezici ezilandelayo:
- okuqukethwe okuphezulu kwe-phosphorus, ukumelana nokukhathala okukhulu;
- Ukunwebeka okuhle kanye nokumelana ne-abrasive;
- Azikho izinto kazibuthe, ezinhle zemishini kanye nokusebenza kwenqubo;
- Ukumelana nokugqwala okuhle, kulula ukushisela nokugqama, futhi akukho nhlansi emthelela;
- I-conductivity enhle, ephephile ekushiseni okuphezulu.
Ukwakhiwa Kwekhemikhali (%)
| Ingxubevange No. | Ukuminyana (g/cm³) | Sn | P | Cu | |
| China | Japan | ||||
| Qsn8-0.3 | C5210 | 8.0 | 7.0-9.0 | 0.03-0.25 | 91.9 |
Izakhiwo Zemishini (Ejwayelekile : GB/T5189-1985)
| Ingxubevange No | I-JIS Temper | Amandla Okuqina Rm/N/mm 2 | Ubude(%) | I-HV Temper |
| C5210 | 1/2H | 470-610 | 27 | 140-205 |
| H | 590-705 | 20 | 185-235 | |
| EH | 680-780 | 11 | 205-230 | |
| SH | 735-835 | 9 | 230-270 |
Qaphela: Singahlinzeka ngemikhiqizo nezinye izakhiwo ngokuvumelana nezidingo zamakhasimende.
Imininingwane Iyatholakala (mm)
| Ubukhulu | Ububanzi | Ulaka |
| 0.01 ~ 0.1 | 1.0~650 | Ngokwezifiso |
Ubukhulu nokubekezelela (mm)
| Ubukhulu | Ukujiya Ukubekezelela | Ububanzi | Ukubekezelela Ububanzi |
| 0.01 ~ 0.6 | ± 0.002 | 1.0 ~ 650mm | ± 0.1 |
| >0.06 ~ 0.1 | ± 0.003 |
Ibanga lezinto ezibonakalayo
| Okubalulekile | I-ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 43S 409 |
| I-ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 316H3H 310, 310H 310b, 310H 310, H 347H, 348H, S31060, N08811, N08020, N08367, I-N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S30601, S335161 03, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| I-JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| I-JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS304S, SUS301S 15J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3US44, SUS29J SUS29, SUS29 SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Ukucaciswa Komkhiqizo
| Qeda | Ubukhulu | Izici | Izinhlelo zokusebenza |
| No. 1 | 3.0mm ~ 50.0mm | Iqedwa ngokuginqika okushisayo, i-annealing kanye ne-picling, ebonakala ngendawo ekhethiwe emhlophe | Imishini yemboni yamakhemikhali, amathangi ezimboni |
| No. 2B | 0.3mm ~ 6.0mm | Iqedwa ukwelashwa ukushisa, pickling ngemva rolling abandayo, kulandele isikhumba pass line ukuze likhanye ngaphezulu futhi ebusweni bushelelezi | I-General Application Medical Instruments, I-Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Ukwelashwa kokushisa okukhanyayo ngemva kokugoqa okubandayo | Isitsha sasekhishini, ikhishi, inhloso yezakhiwo |
| No. 4 | 0.4mm ~ 3.0mm | Ukupholisha ngeNo. 150 kuya ku-No.180 mesh abrasives. Iziqephu ezidume kakhulu | Izinsiza zokucubungula ubisi nokudla, Izinsiza Zesibhedlela, Ubhavu wokugeza |
| No. 8 | 0.5mm ~ 2.0mm | Indawo ekhanyayo efana nesibuko ngokupholishwa ngama-abrasives acolekile angaphezu kwama-mesh angu-800 | I-Reflector, i-Mirror, i-Interior-Ingaphandle umhlobiso wokwakha |
| HL(Umugqa Wezinwele) | 0.4mm ~ 3.0mm | Kuqedwe ngokupholisha komugqa okuqhubekayo | Izinjongo zezakhiwo, izitebhisi ezizihambelayo, izimoto zasekhishini |
Ukwakheka Kwamakhemikhali
| Ibanga | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304j1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3,50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Okunye | - | - | - | - | - |
| I-Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420j1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420j2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0,75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Thinabopha imikhiqizo yensimbi engagqwali ngephepha elilwa nokugqwala kanye namasongo ensimbi ukuze uvimbele umonakalo.
Amalebula okuhlonza amakwe ngokuya ngemininingwane ejwayelekile noma imiyalelo yekhasimende.
Ukupakisha okukhethekile kuyatholakala ngokwemfuneko yekhasimende ngalinye.
Iphakheji Yekhoyili Yensimbi Engagqwali
Ishidi Lensimbi Engagqwali / Iphakheji Lepuleti Lensimbi Engagqwali
Iphakheji ye-Stainless Steel Strip
Iphakheji Lokuthumela
Inkampani yethu izinze eWuxi, iqoqa idolobha lezimboni zensimbi engagqwali eChina.
Sasebenza ngokukhethekile ngamakhoyili angagqwali, amashidi kanye nepuleti, ipayipi nokufakwa kwensimbi engagqwali, amashubhu ensimbi engagqwali, kanye nemikhiqizo ye-aluminium nemikhiqizo yethusi.
Imikhiqizo yethu iye yanconywa kakhulu ngamakhasimende ethu avela eYurophu, eMelika, eMpumalanga Ephakathi, e-Afrika naseNingizimu-mpumalanga ye-Asia. Sizohlinzeka ngemikhiqizo encintisanayo kanye nesevisi ephelele kumakhasimende.
Ibanga Lensimbi Engagqwali: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 3160, 4, 4, 4, 4, 4 0, 430F, 440, 440c,
Ibanga le-alloy :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
Ngendlela: Amabha Ajikelezayo, Amabha Ayisikwele, Amabha Anezinhlangothi, Amabha Ayisicaba, Ama-engeli, Amashaneli, Amaphrofayili, Izintambo, Izinduku Zocingo, Amashidi, Amapuleti, Amapayipi Angenamthungo, Amapayipi E-ERW, Ama-Flanges, Okokufakwayo, njll.
Q1: Yini i-stainless?
IMP: I-stainless isho ukuthi akukho zimpawu endaweni yensimbi, noma uhlobo lwensimbi olungalinyazwa umoya noma amanzi futhi olungashintshi umbala, olungenabala, olumelana namabala, ukugqwala, ukugqwala kwamakhemikhali.
Q2: Ingabe i-stainless isho ukuthi akukho ukugqwala?
IMP: Cha, ibala lisho ukuthi akulula ukuthi libe namabala noma ukugqwala, linamandla akhethekile okumelana namabala, ukugqwala kanye nokugqwala.
Q3: Ingabe uhlinzeka ngamashidi ensimbi engagqwali?
A: Yebo, sihlinzeka ngezinhlobo ezahlukene zamashidi ensimbi engagqwali, anobubanzi obusuka ku-0.3-3.0mm. futhi emaphethelweni ahlukene.
Q4: Ingabe uyayamukela isevisi yokusika ukuze ubude?
IMP: Impela, ukwaneliseka kwekhasimende yinto yethu ehamba phambili.
Q5: Uma ngine-oda elincane, uyalamukela i-oda elincane?
A: Akuyona inkinga, ukukhathazeka kwakho ukukhathazeka kwethu, amanani amancane ayamukelwa.
Q6: Ungaqinisekisa kanjani ikhwalithi yomkhiqizo wakho?
IMP: Okokuqala, zisuka nje, sesivele sifake umoya ezingqondweni zabo, okungukuthi ikhwalithi yokuphila, abasebenzi bethu abangochwepheshe kanye nezinduku bazolandela zonke izinyathelo kuze kube yilapho izimpahla zipakishwa kahle futhi zithunyelwa ngaphandle.
Q7: Ingabe uzopakisha imikhiqizo?
A: Abantu abangochwepheshe benza ukupakisha okuchwepheshile, sinezinhlobo ezahlukene zokupakisha ozikhethela kumakhasimende, elomnotho noma elingcono.
Q8: Yini okudingeka uyazi kukhasimende ngaphambi kwekhotheshini enembile?
IMP: Ukuze uthole ikhotheshini enembile, sidinga ukwazi ibanga, ukujiya, ubukhulu, ukuphela kwendawo, umbala kanye nenani le-oda lakho, kanye nendawo okuyiwa kuyo impahla. Ulwazi lomkhiqizo owenziwe ngokwezifiso luzodingeka kakhulu, njengokudweba, isakhiwo nohlelo. Ngemuva kwalokho sizonikeza ikhotheshini yokuncintisana nolwazi olungenhla.
Q9: Hlobo luni lwesikhathi sokukhokha owamukelayo?
A: Samukela i-T/T, i-West union, i-L/C.
Q10: Uma leli kuyi-oda elincane, ungaletha izimpahla kumenzeli wethu?
IMPENDULO: Yebo, sizalelwe ukuxazulula izinkinga zamakhasimende ethu, sizothola izimpahla ngokuphephile endaweni egcina impahla yomenzeli wakho futhi sikuthumelele izithombe.
Q11: Ingabe wenza ishidi eliyisicaba? Ngifuna ukwenza ukwakheka kwephrojekthi yami entsha.
A: Cha, sikhiqiza ikakhulukazi insimbi engagqwali yokwelashwa kweshidi eliyisicaba, ngesikhathi esifanayo, senza ngokwezifiso umkhiqizo oqediwe wensimbi njengomdwebo nohlelo lwekhasimende ngalinye, uchwepheshe wethu uzonakekela okunye.
Q12: Mangaki ama-coutries osuwathengisile?
A: Ithunyelwa emazweni angaphezu kuka-50 ikakhulukazi eMelika, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, njll.
Q13: Ngingawathola kanjani amasampuli?
A: Amasampuli amancane esitolo futhi angahlinzeka ngamasampula mahhala. I-Catalgue iyatholakala, iningi
amaphethini sinamasampula alungile esitokweni. Amasampula enziwe ngokwezifiso azothatha cishe izinsuku ezingama-5-7.
Q14: Kuyini ukulethwa?
A: Isikhathi sokulethwa kwe-oda lesampula izinsuku ezi-5-7. Ama-oda wesitsha cishe izinsuku eziyi-15-20.
Q15: Luyini uhlelo lokusebenza ngeMikhiqizo yakho?
A: Umnyango we-elevator/cabin noma nodonga oluseceleni lwezitezi ezizihambelayo.
2.Udonga ngaphakathi noma ngaphandle kwegumbi/indawo yokudlela.
3.I-Facade uma uvala into ethile, njengamakholomu endaweni yokwamukela izivakashi.
4.Ceiling in the supermarket. 5.Imidwebo yokuhlobisa kwezinye izindawo zokuzijabulisa.
Q16: Ungaqinisekisa isikhathi esingakanani ngalo Mkhiqizo/Uqede?
A: Isiqinisekiso sombala iminyaka engaphezu kwe-10. Isitifiketi sekhwalithi yezinto zoqobo singa
ukuhlinzekwa.
