I-Super Duplex Steel S32750 / S32760 Sheet kunye neePlates
Inkcazelo emfutshane:
I-Super Duplex Steel S32750 / S32760 Sheet kunye neePlates
I-Super Duplex Steel S32750 / S32760 Ishiti kunye neNgcaciso yePlate
Umgangatho : ASTM / ASME A240 / SA240
Ubukhulu: 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Ukutyeba: 0.1mm ukuya kwi-12 mm Thk
Imo : Iikhoyili, iiFoil, iiRolling, iPhepha elingenanto, iShim Shim, iStrip, iiFlethi, engenanto (isangqa), iringi (iFlange)
Gqiba : I-Hot rolled plate (HR), i-Cold rolled sheet (CR), i-2B, i-2D, i-BA NO (8), i-SATIN (Idibene ne-Plastic Coated)
Ukuqina: Ithambile, inzima, iHalf Hard, iQuarter Hard, iSpring Hard njl.
Amabanga alinganayo eSuper Duplex S32750 / S32760 Sheet kunye nePleti
| UMGANGATHO | WERKSTOFF NR. | UNS |
| Super Duplex | 1.4410 | S32750 / S32760 |
I-Super Duplex Steel 32750 / 32760 Sheet & Plate Chemical Composition
| Isiqalelo | Super Duplex S32750 | Super Duplex S32760 |
| C | 0.030 ubuninzi | 0.05 ubuninzi |
| Mn | 1.20 ubuninzi | 1.00 max |
| Si | 0.80 ubuninzi | 1.00 max |
| P | 0.035 ubuninzi | 0.030 ubuninzi |
| S | 0.020 ubuninzi | 0.010 ubuninzi |
| Cr | 24 – 26 | 24 – 26 |
| Mo | 3 – 5 | 3 – 4 |
| Ni | 6 – 8 | 6 – 8 |
| N | 0.24 - 0.32 | 0.20 - 0.30 |
| Fe | 58.095 min | 57.61 min |
IiPropati zoomatshini beSuper Duplex 32750 / 32760 Icwecwe kunye nePleti
| Isiqalelo | Super Duplex 32750 / 32760 |
| Ukuxinana | 7.8 g/cm3 |
| Indawo yokunyibilika | 1350 °C (2460 °F) |
| Tensile strength | ksi – 116 |
| Ukomelela kweSivuno (0.2% i-offset) | ksi-80 |
| Elongation | 15% |
Iindidi ze-Super Duplex Steel S32750 / S32760 Sheets and Plates
Super Duplex Steel S32750 / S32760 Sheet
2b ukugqiba Super Duplex 32760 Sheet
#4 gqiba Super Duplex S32750 Sheet
Sika ubungakanani Super Duplex S32760 Sheet
A240 Super Duplex 32750 Sheet
WERKSTOFF NR. 1.4410 Iphepha
Super Duplex Steel 32750 Mirror Finish Sheet
#8 Gqibezela Super Duplex S32760 Sheet
4 Brush Gqiba Super Duplex 32750 Sheet
Super Duplex S32760 Sheet
Super Duplex Steel S32750 / S32760 Icwecwe
Sika ubungakanani Super Duplex S32760 Plate
Super Duplex Steel 32750 Mirror Finish Plate
Icwecwe le-UNS S32750
WERKSTOFF NR. 1.4410 Icwecwe
2b ukugqiba Super Duplex S32760 Icwecwe
#8 Gqibezela Super Duplex 32750 Icwecwe
4 Brush Gqiba Super Duplex 32760 Plate
Icwecwe leSuper Duplex S32750
A240 Super Duplex 32760 Icwecwe
#4 gqiba Super Duplex 32750 Icwecwe
Super Duplex 32750/32760 Cold Rolled Sheet/Plates
WERKSTOFF NR. 1.4410 Icwecwe eliQingiweyo kunye neePlates
#4 gqiba Super Duplex S32760 Cold Rolled Sheet & Plates
A240 Super Duplex Steel 32760 Cold Rolled Sheet & Plates
I-UNS S32750 iPhepha eliQonxiweyo elibandayo kunye neePlati
Super Duplex Steel S32750 2b finish Cold Rolled Sheet & Plates
Thumela ngaphandle i-Polish Super Duplex Steel 32750 CR Sheet & Plates
Super Duplex Steel S32750 Cold Rolled sheet & Plates
Super Duplex 32750/32760 Hot Rolled Sheet/Plates
Hot Rolled #4 finish Super Duplex S32750 Sheet & Plates
Super Duplex Steel S32750 2b finish Hot Rolled Sheet & Iipleyiti
A240 Super Duplex Steel 32760 Hot Rolled Sheet & Iipleyiti
I-UNS S32750 iPhepha eliQonxiweyo eliQhelekileyo kunye neePlati
Thumela ngaphandle i-Polish Super Duplex Steel 32760 HR Sheet & Plates
Super Duplex Steel S32760 Hot Rolled Sheet & Iipleyiti
WERKSTOFF NR. 1.4410 Ishiti eliQonxiweyo kunye neePlates
IBanga leMathiriyeli
| Izinto eziphathekayo | Umgangatho we-ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 40009 |
| Umgangatho we-ASTM A480 | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 316HHH 310HHH 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31225, S31225, S31225 S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S322054, S32205 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| I-JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| Umgangatho we-JIS G4305 | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS301SS3012S SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS33USS, SUS316J62J SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LJ3, SUS4, SUS4L404, SUS430LJ3US4, S30L4, SUS404, SUS404, SUS404, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Ukucaciswa kweMveliso
| Gqiba | Ukutyeba | Iimpawu | Usetyenziso |
| Inombolo 1 | 3.0mm~50.0mm | Igqitywe ngokushushumbisa, i-annealing kunye ne-pickling, ebonakaliswe ngumphezulu omhlophe otyunjiweyo | Izixhobo zeshishini lemichiza, iitanki zeShishini |
| No. 2B | 0.3mm ~ 6.0mm | Kugqitywe unyango ubushushu, pickling emva ebandayo rolling, kulandele ulusu pass line ukuba liqaqambe ngakumbi kwaye agudileyo ubuso | Izixhobo zezoNyango eziSebenzisiweyo, iTableware |
| INombolo ye-BA (Eqaqambileyo eAnealed) | 0.5mm ~ 2.0mm | Ukunyangwa kobushushu obuqaqambileyo emva kokuqengqeleka okubandayo | Ikhitshi yekhitshi, ikhitshi, injongo yezakhiwo |
| Inombolo yesi-4 | 0.4mm ~ 3.0mm | Ukucoca ngeNombolo ye-150 ukuya kwi-No.180 ye-mesh abrasives. Ezona zigqityiweyo zidumileyo | Amaziko okwenziwa kobisi kunye nokutya, izixhobo zesibhedlele, ibhafu |
| Inombolo yesi-8 | 0.5mm ~ 2.0mm | Umphezulu onjengesipili obonakalisayo ngokugudiswa ngezithinteli ezicolekileyo ngaphezu kwe-800 mesh | IReflector, isipili, Ngaphakathi-Uhombiso lwangaphandle lolwakhiwo |
| HL(Umgca weNwele) | 0.4mm ~ 3.0mm | Igqitywe ngokucolwa ngokuqhubekayo komgca | Iinjongo zezakhiwo, izitepusi ezizihambelayo, izithuthi zasekhitshini |
Ukuqulunqwa kwemichiza
| IBanga | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Okunye | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Thinazisonga iimveliso zensimbi ezingenasici ngephepha elichasayo kunye nentsimbi yentsimbi ukukhusela umonakalo.
Iileyibhile zokuchongwa ziphawulwe ngokwemigaqo esemgangathweni okanye ngokwemiyalelo yomthengi.
Ukupakishwa okukhethekileyo kuyafumaneka ngokwemfuno yomthengi.
Ipakethe yekhoyili yensimbi engenaStainless
Iphepha leNsimbi elingenaStainless / iPakeji yePleyiti yentsimbi engatyiwa
Ipakethe yeStrip Strip
Ipakethe yokuThunyelwa
Inkampani yethu izinze eWuxi, iqokelela isixeko sesinyithi esingenasici eTshayina.
Sisebenza ngokukhethekileyo kwiikhoyili ezingenasici, amashiti kunye nepleyiti, umbhobho wentsimbi engatyiwa kunye nezinto zokufakelwa, iityhubhu zentsimbi, kunye neemveliso ze-aluminiyam kunye neemveliso zobhedu.
Iimveliso zethu ziye zanconywa kakhulu ngabathengi bethu abavela eYurophu, eMelika, kuMbindi Mpuma, eAfrika nakuMzantsi-mpuma Asia. Siza kubonelela ngeemveliso ezikhuphisanayo kunye nenkonzo ebanzi kubathengi.
I-Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 4, 1, 3, 316, 4, 3, 4 420, 430, 430F, 440, 440c,
IBanga le-alloy: iMonel, i-Inconel, iHastolley, iDuplex, iSuper Duplex, iTitanium, iTantalum, iNtsimbi enesantya esiphezulu, intsimbi ethambileyo, iAluminium, intsimbi yentsimbi, iCarbon Steel, iNickel Alloys
Kwimo ye: IiBar eziRound, iiBar zesikwere, ii-Hexagonal Bars, ii-Flat Bars, ii-engile, ii-Channels, iiProfayili, iiNcingo, iiNcingo zocingo, ii-Sheets, iiPleti, iMibhobho engenamthungo, i-ERW Pipes, iiFlanges, iiFittings, njl.
Q1: Yintoni i-stainless?
A: I-stainless ithetha ukuba akukho manqaku kumphezulu wentsimbi, okanye uhlobo lwentsimbi engonakaliswanga ngumoya okanye ngamanzi kwaye engatshintshi umbala, engenabala, ekwazi ukumelana nokubola, ukurusa, isiphumo sokubola kweekhemikhali.
I-Q2: Ngaba i-stainless ithetha ukuba akukho ukugqwala?
IMPENDULO: Hayi, i-stainless ithetha ukuba akukho lula ukungcola okanye ukurusa, inamandla akhethekileyo okuxhathisa ibala, ukurusa kunye nokuhlwa.
I-Q3: Ngaba unikezela ngamashiti ensimbi engenasici?
A: Ewe, sinikezela ngeentlobo ezahlukeneyo zeshiti zensimbi ezingenasici, ezinobubanzi obusuka kwi-0.3-3.0mm. kunye nokugqiba ezahlukeneyo.
I-Q4: Ngaba uyayamkela inkonzo yokusika ukuya kubude?
A: Ewe, ukwaneliseka kwabathengi yeyona nto iphambili kuthi.
Q5: Ukuba ndineodolo encinci, uyayamkela iodolo encinci?
A: Akuyongxaki, inkxalabo yakho yinkxalabo yethu, amanani amancinci amkelwe.
I-Q6: Ungaqinisekisa njani umgangatho wemveliso yakho?
A: Okokuqala, kwasekuqaleni, sele siphumeze umoya ezingqondweni zabo, obo bubomi obusemgangathweni, abasebenzi bethu abaqeqeshiweyo kunye nabasebenzi baya kulandela inyathelo ngalinye de iimpahla zipakishwe kakuhle kwaye zithunyelwe ngaphandle.
I-Q7: Ngaba uya kupakisha iimveliso?
A: Abantu abachwephesha benza ukupakisha abaqeqeshiweyo, sineentlobo ezahlukeneyo zokupakisha ozikhethelayo kubathengi, uqoqosho okanye olungcono.
I-Q8: Yintoni ekufuneka uyazi kumthengi ngaphambi kokucaphula okuchanekileyo?
A: Ukufumana ikowuteshini echanekileyo, kufuneka sazi ibakala, ubukhulu, ubukhulu, ukugqiba komphezulu, umbala kunye nobungakanani beodolo yakho, kunye nendawo eziya kuyo iimpahla. Ulwazi lwemveliso elungiselelweyo luya kufuneka ngakumbi, njengokuzoba, uyilo kunye nesicwangciso. Emva koko siya kubonelela ngekowuteshini ekhuphisanayo kunye nolwazi olungentla.
I-Q9: Loluphi uhlobo lwexesha lokuhlawula olivumayo?
A: Siyayamkela i-T/T, i-West union, i-L/C.
I-Q10: Ukuba lo ngumyalelo omncinci, ngaba uya kuhambisa iimpahla kwi-arhente yethu?
A: Ewe, sizalelwe ukusombulula iingxaki zabathengi bethu, siya kufumana iimpahla ngokukhuselekileyo kwindawo yokugcina iarhente yakho kwaye sikuthumelele imifanekiso.
Q11: Ngaba wenza ishiti elicaba? Ndifuna ukwenza ulwakhiwo lweprojekthi yam entsha.
A: Hayi, sivelisa ubukhulu becala isinyithi esingenasici esisicaba sonyango, kwangaxeshanye, senza imveliso egqityiweyo yentsimbi egqityiweyo ngokomzobo kunye nesicwangciso somthengi, igcisa lethu liya kukhathalela abanye.
Q12: Zingaphi iicoutries osele uzithumele ngaphandle?
A: Ithunyelwa kumazwe angaphezu kwama-50 ikakhulu isuka eMelika, eRashiya, eUK, eKuwait, eYiphutha, eIran,
Turkey, Jordan, njl.
Q13: Ndingazifumana njani iisampuli?
A: Iisampuli ezincinci kwivenkile kwaye zinokubonelela ngeesampuli simahla. I-Catalgue iyafumaneka, uninzi
iipatheni esinazo iisampulu esele zilungile kwisitokhwe. Iisampuli ezenziwe ngokwezifiso ziya kuthatha malunga ne-5-7days.
Q14: Yintoni ukuhanjiswa?
A: Ixesha lokuhanjiswa kwesampula yi-5- 7 iintsuku. Iiodolo zesikhongozeli malunga neentsuku ze-15-20.
Q15: Sithini isicelo malunga neeMveliso zakho?
A: Umnyango we-elevator / i-cabin okanye kunye nodonga olusecaleni lwe-escalator.
2.Izigqubuthelo zodonga ngaphakathi okanye ngaphandle kwegumbi lentlanganiso/ indawo yokutyela.
3.I-Facade xa ugqume phezu kwento ethile, njengeekholamu kwindawo yokwamkela iindwendwe.
4.Isilingi kwivenkile enkulu. 5.Decorative umzobo kwezinye iindawo zokuzonwabisa.
I-Q16: Ungayiqinisekisa ixesha elingakanani le Mveliso / ukugqiba?
A: Isiqinisekiso sombala ngaphezu kweminyaka eyi-10. Isiqinisekiso somgangatho wemathiriyeli yoqobo sinakho
kubonelelwa.
