Umtya weNtsimbi eStainless

Imicu yentsimbi epholileyo yintsimbi epholileyo eqengqelekayo engaphantsi kwe-5.00 mm ubukhulu nangaphantsi kwe-610mm ububanzi.

Iindidi ezahlukeneyo zokugqibezela ezifumanekayo kwimicu epholileyo eqengqelekayo engenastainless yiNo.1 Finish, No.2 Finish, BA Finish, TR Finish, kunye nePolished Finish.

Iindidi zemiphetho ekhoyo kwimicu ye-stainless yiNo.1 edge, i-3 edge, kunye ne-5 edge. Ezi ziqwenga zifakwe kwi-200 series, 300 series, 400 series.

Imveliso yethu ethengiswa kakhulu ibandakanya i-201 yentsimbi yentsimbi, i-202 yensimbi engenasici, i-301 i-stainless steel strips, i-304 kunye ne-304L i-strip strips yensimbi, i-316 kunye ne-316L i-stripless steel strips, i-409, i-410, kunye ne-430 yentsimbi engenasici.

Ubukhulu bazo buqala kwi-0.02mm ukuya kwi-6.0mm. Ubuncinci bokunyamezela kubunzima yi-0.005mm kuphela. Kwintsimbi, sizimisele.

 

Inkcazo
Ubungakanani	Ukutyeba: 0.02 ~ 6.0mm; Ububanzi:0 ~ 610mm
Ubuchule	Abandayo Aqengqiwe, Ashushu aqengqeleka
Umphezulu	2B, BA, 8K, 6K, Mirror Finished, No.1, No.2, No.3, No.4, Hair Line ngePVC
Umgangatho	ASTM A240, ASTM A480, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, DIN 17441

 

Gqibezela kwiStainless Slit Coil
No.1 Gqiba:I-cold-role ukuya kubukhulu obuchaziweyo, ifakwe e-anneal, kunye ne-descaled.
No.2 Gqiba:Ngokufana neNombolo yoku-1 Gqiba, ilandelwa kukugqithiswa kokukhanya kokugqibela okubandayo, ngokubanzi kwimiqulu epolishwe kakhulu.
Gqibezela ngokuQinisekisayo:Ukugqitywa okuqaqambileyo okuqengqelekayo kugcinwe ngokufakwa kokugqibela kwisithando somlilo esilawulwayo.
TR Gqiba:Kubanda-ukusebenza ukufumana iipropati ezichaziweyo.
Gqibezela kakuhle:Ikwafumaneka kwiifinishi ezikhazimlisiweyo ezifana ne-No.3 kunye ne-4.

Phawula:
No.1— Inkangeleko yesi sigqibo iyahluka ukusuka kwimatte engwevu engacacanga ukuya kwindawo ebonakalisa ukulunga, kuxhomekeke ubukhulu becala ekubunjweni kwayo. Oku kugqitywa kusetyenziselwa ukutsalwa kanzima okanye iindawo ezibunjiweyo, kunye nezicelo apho iNo.
No.2- Olu kugqiba lunomgangatho olula kwaye lubonakalisa ngakumbi, ukubonakala kwayo kuyahluka ngokubunjwa. Le yinjongo yokugqiba, esetyenziswa ngokubanzi kwikhaya kunye ne-automotive trim, tableware, izitya, iitreyi, njl.
No.3— Ukugqitywa komgca okunokuveliswa ngokugudiswa ngoomatshini okanye ngokuqengqeleka. I-avareji yoburhabaxa bomphezulu ingafikelela kwi-intshi ezingama-40. Umsebenzisi onobuchule unokudibanisa ngokubanzi oku kugqitywa. Imilinganiselo yoburhabaxa bomphezulu iyahluka ngezixhobo ezahlukeneyo, iilabhoratri kunye nabasebenzi. Kusenokubakho ukutyhoboza kwimilinganiselo yoburhabaxa bomphezulu kuzo zombini iNombolo yesi-3 neyesi-4.
No.4-linearly textured finish enokuthi iveliswe mhlawumbi ngoomatshini okanye ngokuqengqeleka. Umndilili woburhabaxa bomphezulu bunokufikela kwii-intshi ezingama-25. Umsebenzisi onobuchule unokudibanisa ngokubanzi oku kugqitywa. Imilinganiselo yoburhabaxa bomphezulu iyahluka ngezixhobo ezahlukeneyo, iilabhoratri kunye nabasebenzi. Kusenokubakho ukutyhoboza kwimilinganiselo yoburhabaxa bomphezulu kuzo zombini iNombolo yesi-3 neyesi-4.
Ukugqibezela okugudileyo, okuqaqambileyo, okukhanyayo okuveliswa kukuqengqeleka okubandayo okulandelwa kukuntywila kwindawo ekhuselayo ukuze kuthintelwe i-oxidation kunye nokukalwa ngexesha lokufakwa.
Ukugqitywa kwe-TR-Ukugqiba okubangelwa ukuqengqeleka okubandayo kwemveliso edibeneyo kunye ne-scaled okanye eqaqambileyo efakwe kwi-annealed ukuze ifumane iimpawu zomatshini eziphezulu kunemeko edibeneyo. Imbonakalo iya kuhluka ngokuxhomekeke ekugqityweni kokuqala, inani lomsebenzi obandayo, kunye ne-alloy.

Imiphetho yeCoil yeStainless Slit
No.1 Edge:Umphetho osongelweyo, nokuba ungqukuva okanye isikwere njengoko kuchaziwe.
No.3 Edge:Umphetho oveliswa ngokunqunyulwa.
No.5 Edge:Umphetho omalunga nesikwere oveliswa ngokuqengqeleka okanye ngokufayilisha emva kokunqunyulwa.

Unyamezelo kuKutyeba

 

IcacisiweUkutyeba, mm	Ukunyamezela ukutyeba, ukutyeba kunye nobubanzi obunikiweyo, ngaphezulu nangaphantsi, mm.
	Ububanzi (w), mm.
	W≤152mm	152mmW≤305mm	305mm＜W≤610mm
	Ukutyeba UkunyamezelaA
0.05 ukuya ku-0.13, ngaphandle.	10%	10%	10%
0.13 ukuya ku-0.25, kubandakanywa.	0.015	0.020	0.025
0.25 ukuba 0.30, kubandakanywa.	0.025	0.025	0.025
0.30 ukuba 0.40, kubandakanywa.	0.025	0.04	0.04
0.40 ukuba 0.50, kubandakanywa.	0.025	0.04	0.04
0.50 ukuba 0.74, kubandakanywa.	0.04	0.04	0.050
0.74 ukuba 0.89, kubandakanywa.	0.04	0.050	0.050
0.89 ukuba 1.27, kubandakanywa.	0.060	0.070	0.070
1.27 ukuba 1.75, kubandakanywa.	0.070	0.070	0.070
1.75 ukuba 2.54, kubandakanywa.	0.070	0.070	0.10
2.54 ukuba 2.98, kubandakanywa.	0.10	0.10	0.12
2.98 ukuba 4.09, kubandakanywa.	0.12	0.12	0.12
4.09 ukuba 4.76, kubandakanywa.	0.12	0.12	0.15

 

Qaphela A : Ukunyamezela ukutyeba kunikwe I mm ngaphandle kokuba kuboniswe ngenye indlela.

Ukunyamezelana ngobubanzi

 

Ukutyeba okuchaziweyo, mm	Ukunyamezelwa koBubanzi, Ngaphezulu naPhantsi, kuButyebi kunye nobubanzi obunikiweyo, mm
	W≤40mm	152mmW≤305mm	150mm＜W≤305mm	152mmW≤305mm
0.25	0.085	0.10	0.125	0.50
0.50	0.125	0.125	0.25	0.50
1.00	0.125	0.125	0.25	0.50
1.50	0.125	0.15	0.25	0.50
2.50	…	0.25	0.40	0.50
3.00	…	0.25	0.40	0.60
4.00	…	0.40	0.40	0.60
4.99	…	0.80	0.80	0.80