Ibha yeAngle yentsimbi engatyiwayo

Ubungakanani be-angle yentsimbi yensimbi engenasici esiyenzayo ukusuka kwi-20x20x3mm ukuya kwi-150x150x12mm, nayiphi na isayizi yemveliso kuluhlu lwethu lwemveliso luyafumaneka.

I-angle yentsimbi yentsimbi yeyona mveliso ixhaphakileyo, ngoko sihlala sigcina phantse onke amabakala entsimbi ukuhlangabezana nemfuno enkulu yemarike. Ibakala lentsimbi esilifumanayo libandakanya ii-angles ezingama-200 zensimbi engenasici, ii-angles ezingama-300 zensimbi engenasici, ii-angles ezingama-400 zentsimbi, kunye nemivalo yealloyi ephezulu.

Zisetyenziswa ngokubanzi kushishino lolwakhiwo kunye nokuhanjiswa kweenqanawa kunye noomatshini abahlukeneyo kunye nehardware. I-Wuxi Cepheus inokuhlangabezana neemfuno ezikhethekileyo nezingqongqo zomthengi malunga nokusetyenzwa kwe-angle bar ngoomatshini bokuqhubekekisa phambili.

Inkcazo
Ubungakanani	20 x 20 x 3mm – 150 x 150 x 12mm
Ubuchule	Ishushu Isongwe, Itsalwa ngokubanda
Umphezulu	ISandblast, iPickled, iBright, ikhazimlisa, iNwele
Ubunzima obuthiyori(kg/m)	I-SS Equal Angles: Ubunzima / imitha = 0.00793 * T * (2W-T) Zombini i-W kunye ne-T kwi-mm.
	I-SS ii-angles ezingalinganiyo: Ubunzima / imitha = 0.00793 * T * (W1 + W2-T) Zombini i-W1, W2 kunye ne-T kwi-mm.

Phawula:

W ubude obuchaziweyo bobude bomlenze.

T bubuninzi obuxeliweyo

I-W1 kunye ne-W2 ubude obuchaziweyo bobude bemilenze.

Amabanga aPhambili

1.Imigangatho:

I-AISI, i-ASTM, i-DIN, i-EN, i-GB kunye ne-JIS; ASTM A276, A484, A564, A581, A582, EN 10272, JIS4303, JIS G 431, JIS G 4311 kunye neJIS G 4318

2.Izixhobo(iBanga):

300series: 301,302,303,304,304L,309,309s,310,310S,316,316L,316Ti,317L,321,347,

200series:201,202,202cu, 204;

400series:409,409L,410,420,430,431,440;

Abanye:2205,2507,330,660,630,631,17-4ph,17-7 ph,904L, njl.

Unyamezelo oluvunyelweyo lweNtsimbi eNgena ntsimbi eHotyo eQoqelweyo

1. Ubunzima

1.1 Kwiengile ze-9.0 kg/m[6 lb/ft] okanye ngaphantsi, ukunyamezela ubunzima akusayi kudlula+/-7.5%.

1.2 Kwii-engile ezingaphezulu kwe-9.0 kg/m[6 lb/ft], ukunyamezela ubunzima akusayi kudlula+/-7.5%.

2. Ubude bemilenze

2.1 Kwii-engile zentsimbi engenastainless enemilenze okanye iiflange ukuya kuthi ga kwi-150 mm [6 in.], ukunyamezela ubude akusayi kudlula +/-3.00mm[+/-0.125in.]

2.2 Kwiiengile zentsimbi engenastainless enemilenze okanye iiflange ezingaphezulu kwe-150mm, ubude bokunyamezela abuyi kudlula +5.00mm[0.1875in.] kunye -3.00mm[0.125in.]

3. Ubukhulu bemilenze

3.1 Ukunyamezela i-engile ekunene phakathi kwemilenze ngu+/-2°.

Inqaku-1:

Ubunzima beThiyori beeEngile zeNtsimbi eLinganayo

Ubunzima obuthiyori ngemitha nganye:

Ubunzima / imitha = 0.00793 * T * (2W-T) Bobabini i-W kunye ne-T kwi-mm.

Ubunzima obuthiyori ngenyawo nganye:

Ubunzima/unyawo = (24 WXT – 12T²）(0.2871 lb/ft) Zombini i-W kunye ne-T nge-intshi.

W ubude obuchaziweyo bobude bomlenze.

T bubuninzi obuxeliweyo

Inqaku-2:

Ubunzima beThiyori bee-engile zeNtsimbi eNgatyiwayo ezingalinganiyo

Ubunzima obuthiyori ngemitha nganye:

Ubunzima / imitha = 0.00793 * T * (W1 + W2-T) Zombini i-W1 , W2 kunye ne-T kwi-mm.

Ubunzima obuthiyori ngenyawo nganye:

Ubunzima/unyawo = (12 W1X T + 12 W2 – 12T²）(0.2871 lb/ft) W1, W2,T yonke nge-intshi.

I-W1 kunye ne-W2 ubude obuchaziweyo bobude bemilenze.

T bubunzima bomlenze obuchaziweyo

Ukupakisha Ulwazi

Iibha ze-angle ezivela kwiWuxi Cepheus zipakishwe ngokwemfuno yomthengi. Ukunqanda nawuphi na umonakalo onokuthi ubangelwe ngexesha lothutho lwamazwe ngamazwe, sibonelela ngeendlela zokupakisha ozikhethelayo, kuquka iibhegi ezilukiweyo, iikeyiki zeplywood, kunye neebhokisi zomthi.