I-Inconel Alloy 718 Coil & Strip UNS N07718 W.Nr 2.4668
Inkcazelo emfutshane:
I-Inconel Alloy 718 Coil& Ukuhluba
Usetyenziso
I-alloy 718 idibanisa iipropathi eziyenza ilungele usetyenziso lwecandelo elenziweyo kwii-injini zombini kunye nee turbines ezisekwe emhlabeni. Ezi ziquka amatywina, imivumbo, kunye neendidi ezininzi zentsimbi ezinesitampu. I-alloy isetyenziselwa i-downhole kunye namacandelo e-wellhead yemithombo yeoli kunye negesi.
Inkcazo
I-Inconel® 718 yi-Nickel-Chromium-Columbium (i-Niobium) -i-Molybdenum eqiniweyo yeminyaka yobudala enamandla amakhulu, i-corrosion-resistance, kunye neempawu ezintle zokwenza. I-Inconel® 718 inokuqina okuphezulu, isivuno, kunye neempawu zokuqhekeka kumaqondo obushushu aphezulu ukuya kuma-1200 ° F (650 ° C).
Amashishini aNikiwe
Ukutsalwa kwe-oyile negesi, iNyukliya, iAerospace, uKhuselo kunye neMoto.
Ukuqulunqwa ngokuNgena
C: 0.08 max
Mn: 0.35 max
ISi: 0.35 max
P: 0.015 max
S: 0.015 ubuninzi
Cr: 17.0 - 21.0
Ni: 50.0 - 55.0
Mo: 2.80 - 3.30
Nb: 4.75 - 5.50
Ixesha: 0.65 - 1.15
Al: 0.20 - 0.80
Co: 1.0 max
Fe:Balance
Iipropati Zomzimba
Ubuninzi:0.296 lb/in3, (8.19 g/cm3)
Imodyuli yoKulula (E):
Kuma-70°F (20°C): 29 x 103 ksi (200 GPA)
Imodyuli yokuNika (G)
Kuma-70°F (20°C): 11.6 x 103 ksi (80 GPA)
I-Coefficient yoKwandiswa:
7.7 µin/in.-°F (70°F ukuya ku-600°F)
13.9 µm/m-°C (20°C ukuya ku-538°C)
Ukuxhathisa koMbane:47.5 µΩ.in, (121 µΩ.cm)
I-Thermal Conductivity:79 Btu-in/ft2hr-°F, (11.4 W/mK)
Iinkcukacha eziSebenzayo
Ukuqhawula kunye neFoil:AMS 5596, AMS 5597, ASTM B670
Iipropati zoomatshini eziqhelekileyo
- I-Anealed
- Unyango loBubushushu:1800°F (980°C)
- Tensile strength:120 – 140 ksi (830 – 965 MPa)
- IiMeko zokuSebenza eziCetyisiweyo:-330°F ukuya ku-1200°F (-200°C ukuya ku-650°C)
- Ubushushu baseNtwasahlobo
- Tensile strength:180 – 230 ksi (1240 – 1585 MPa)
- IiMeko zokuSebenza eziCetyisiweyo:-330°F ukuya ku-1200°F (-200°C ukuya ku-650°C)
- Emva kweNgxowa-mali yoBushushu
- Unyango loBubushushu:Ngokwe-AMS 5596
- Tensile strength:190 – 240 ksi (1310 – 1655 MPa)
- IiMeko zokuSebenza eziCetyisiweyo:-330°F ukuya ku-1200°F (-200°C ukuya ku-650°C)
IBanga leMathiriyeli
| Izinto eziphathekayo | Umgangatho we-ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 40009 |
| Umgangatho we-ASTM A480 | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 316HHH 310HHH 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31225, S31225, S31225 S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S322054, S32205 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| I-JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| Umgangatho we-JIS G4305 | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS301SS3012S SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS33USS, SUS316J62J SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LJ3, SUS4, SUS4L404, SUS430LJ3US4, S30L4, SUS404, SUS404, SUS404, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Ukucaciswa kweMveliso
| Gqiba | Ukutyeba | Iimpawu | Usetyenziso |
| Inombolo 1 | 3.0mm~50.0mm | Igqitywe ngokushushumbisa, i-annealing kunye ne-pickling, ebonakaliswe ngumphezulu omhlophe ocoliweyo | Izixhobo zeshishini lemichiza, iitanki zeShishini |
| No. 2B | 0.3mm ~ 6.0mm | Kugqitywe unyango ubushushu, pickling emva ebandayo rolling, kulandele ulusu pass line ukuba liqaqambe ngakumbi kwaye agudileyo ubuso | Izixhobo zezoNyango eziSebenzisiweyo, iTableware |
| INombolo ye-BA (Eqaqambileyo eAnealed) | 0.5mm ~ 2.0mm | Ukunyangwa kobushushu obuqaqambileyo emva kokuqengqeleka okubandayo | Ikhitshi yekhitshi, ikhitshi, injongo yezakhiwo |
| Inombolo yesi-4 | 0.4mm ~ 3.0mm | Ukucoca ngeNombolo ye-150 ukuya kwi-No.180 ye-mesh abrasives. Ukugqiba okudumileyo | Amaziko okwenziwa kobisi kunye nokutya, izixhobo zesibhedlele, ibhafu |
| Inombolo yesi-8 | 0.5mm ~ 2.0mm | Umphezulu onjengesipili obonakalisayo ngokugudiswa ngezithinteli ezicolekileyo ngaphezu kwe-800 mesh | IReflector, isipili, Ngaphakathi-Uhombiso lwangaphandle lolwakhiwo |
| HL(Umgca weNwele) | 0.4mm ~ 3.0mm | Igqitywe ngokucolwa ngokuqhubekayo komgca | Iinjongo zezakhiwo, izitepusi ezizihambelayo, izithuthi zasekhitshini |
Ukuqulunqwa kwemichiza
| IBanga | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Okunye | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Thinazisonga iimveliso zensimbi ezingenasici ngephepha elichasayo kunye nentsimbi yentsimbi ukukhusela umonakalo.
Iileyibhile zokuchongwa ziphawulwe ngokwemigaqo esemgangathweni okanye ngokwemiyalelo yomthengi.
Ukupakishwa okukhethekileyo kuyafumaneka ngokwemfuno yomthengi.
Ipakethe yekhoyili yensimbi engenaStainless
Iphepha leNsimbi elingenaStainless / iPakeji yePleyiti yentsimbi engatyiwa
Ipakethe yeStrip Strip
Ipakethe yokuThunyelwa
Inkampani yethu izinze eWuxi, iqokelela isixeko sesinyithi esingenasici eTshayina.
Sisebenza ngokukhethekileyo kwiikhoyili ezingenasici, amashiti kunye nepleyiti, umbhobho wentsimbi engatyiwa kunye nezinto zokufakelwa, iityhubhu zentsimbi, kunye neemveliso ze-aluminiyam kunye neemveliso zobhedu.
Iimveliso zethu ziye zanconywa kakhulu ngabathengi bethu abavela eYurophu, eMelika, kuMbindi Mpuma, eAfrika nakuMzantsi-mpuma Asia. Siza kubonelela ngeemveliso ezikhuphisanayo kunye nenkonzo ebanzi kubathengi.
I-Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 4, 1, 3, 316, 4, 3, 4 420, 430, 430F, 440, 440c,
IBanga le-alloy: iMonel, i-Inconel, iHastolley, iDuplex, iSuper Duplex, iTitanium, iTantalum, iSpeed Speed Steel, intsimbi eMild, iAluminium, iAlloy Steel, Carbon Steel, Special Nickel Alloys
Kwimo ye: IiBar eziRound, iiBar zesikwere, ii-Hexagonal Bars, ii-Flat Bars, ii-engile, ii-Channels, iiProfayili, iiNcingo, iiNcingo zocingo, ii-Sheets, iiPleti, iMibhobho engenamthungo, i-ERW Pipes, iiFlanges, iiFittings, njl.
Q1: Yintoni i-stainless?
A: I-stainless ithetha ukuba akukho manqaku kumphezulu wentsimbi, okanye uhlobo lwentsimbi engonakaliswanga ngumoya okanye ngamanzi kwaye engatshintshi umbala, engenabala, ekwazi ukumelana nokubola, ukurusa, isiphumo sokubola kweekhemikhali.
I-Q2: Ngaba i-stainless ithetha ukuba akukho ukugqwala?
IMPENDULO: Hayi, i-stainless ithetha ukuba akukho lula ukungcola okanye ukurusa, inamandla akhethekileyo okuxhathisa ibala, ukurusa kunye nokuhlwa.
I-Q3: Ngaba unikezela ngamashiti ensimbi engenasici?
A: Ewe, sinikezela ngeentlobo ezahlukeneyo zeshiti zensimbi ezingenasici, ezinobubanzi obusuka kwi-0.3-3.0mm. kunye nokugqiba ezahlukeneyo.
I-Q4: Ngaba uyayamkela inkonzo yokusika ukuya kubude?
A: Ewe, ukwaneliseka kwabathengi yeyona nto iphambili kuthi.
Q5: Ukuba ndineodolo encinci, uyayamkela iodolo encinci?
A: Akuyongxaki, inkxalabo yakho yinkxalabo yethu, amanani amancinci amkelwe.
I-Q6: Ungaqinisekisa njani umgangatho wemveliso yakho?
A: Okokuqala, kwasekuqaleni, sele siphumeze umoya ezingqondweni zabo, obo bubomi obusemgangathweni, abasebenzi bethu abaqeqeshiweyo kunye nabasebenzi baya kulandela inyathelo ngalinye de iimpahla zipakishwe kakuhle kwaye zithunyelwe ngaphandle.
I-Q7: Ngaba uya kupakisha iimveliso?
A: Abantu abachwephesha benza ukupakisha abaqeqeshiweyo, sineentlobo ezahlukeneyo zokupakisha ozikhethelayo kubathengi, uqoqosho okanye olungcono.
I-Q8: Yintoni ekufuneka uyazi kumthengi ngaphambi kokucaphula okuchanekileyo?
A: Ukufumana ikowuteshini echanekileyo, kufuneka sazi ibakala, ubukhulu, ubukhulu, ukugqiba komphezulu, umbala kunye nobungakanani beodolo yakho, kunye nendawo eziya kuyo iimpahla. Ulwazi lwemveliso elungiselelweyo luya kufuneka ngakumbi, njengokuzoba, uyilo kunye nesicwangciso. Emva koko siya kubonelela ngekowuteshini ekhuphisanayo kunye nolwazi olungentla.
I-Q9: Loluphi uhlobo lwexesha lokuhlawula olivumayo?
A: Siyayamkela i-T/T, i-West union, i-L/C.
I-Q10: Ukuba lo ngumyalelo omncinci, ngaba uya kuhambisa iimpahla kwi-arhente yethu?
A: Ewe, sizalelwe ukusombulula iingxaki zabathengi bethu, siya kufumana iimpahla ngokukhuselekileyo kwindawo yokugcina iarhente yakho kwaye sikuthumelele imifanekiso.
Q11: Ngaba wenza ishiti elicaba? Ndifuna ukwenza ulwakhiwo lweprojekthi yam entsha.
A: Hayi, sivelisa ubukhulu becala isinyithi esingenasici esisicaba sonyango, kwangaxeshanye, senza imveliso egqityiweyo yentsimbi egqityiweyo ngokomzobo kunye nesicwangciso somthengi, igcisa lethu liya kukhathalela abanye.
Q12: Zingaphi iicoutries osele uzithumele ngaphandle?
A: Ithunyelwa kumazwe angaphezu kwama-50 ikakhulu isuka eMelika, eRashiya, eUK, eKuwait, eYiphutha, eIran,
Turkey, Jordan, njl.
Q13: Ndingazifumana njani iisampuli?
A: Iisampuli ezincinci kwivenkile kwaye zinokubonelela ngeesampuli simahla. I-Catalgue iyafumaneka, uninzi
iipatheni esinazo iisampulu esele zilungile kwisitokhwe. Iisampuli ezenziwe ngokwezifiso ziya kuthatha malunga ne-5-7days.
Q14: Yintoni ukuhanjiswa?
A: Ixesha lokuhanjiswa kwesampula yi-5- 7 iintsuku. Iiodolo zesikhongozeli malunga neentsuku ze-15-20.
Q15: Sithini isicelo malunga neeMveliso zakho?
A: Umnyango we-elevator / i-cabin okanye kunye nodonga olusecaleni lwe-escalator.
2.Izigqubuthelo zodonga ngaphakathi okanye ngaphandle kwegumbi lentlanganiso/ indawo yokutyela.
3.I-Facade xa ugqume phezu kwento ethile, njengeekholamu kwindawo yokwamkela iindwendwe.
4.Isilingi kwivenkile enkulu. 5.Decorative umzobo kwezinye iindawo zokuzonwabisa.
I-Q16: Ungayiqinisekisa ixesha elingakanani le Mveliso / ukugqiba?
A: Isiqinisekiso sombala ngaphezu kweminyaka eyi-10. Isiqinisekiso somgangatho wemathiriyeli yoqobo sinakho
kubonelelwa.
