UNS S30400 Wire
Short Description:
Stainless Steel 304 Wire, UNS S30400 Wiremesh, SS 304 Filler Wire, SS 304 Welding Wire, SS 304 Coils
Stainless Steel 304 Wire, UNS S30400 Wiremesh, SS 304 Filler Wire, SS 304 Welding Wire, SS 304 Coils
ASTM A164 Stainless Steel 304 Wire, werkstoff nr. 1.4301 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.
| Standard | SS 304 |
| UNS | S30400 |
| WERKSTOFF NR. | 1.4301 |
| AFNOR | Z7CN18-09 |
| JIS | SUS 304 |
| GOST | 08X18H10 |
| BS | 304S31 |
| EN | X5CrNi18-10 |
STAINLESS STEEL 304 WIRE SPECIFICATION :
Standard : 304 / 1.4301
Range : 0.10mm to 8.00mm Required Size
Designation : ASTM A164, ASME SA164
Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh
Finish: Soft annealed – ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)
UNS S30400 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| 304 | 0.08 max | 2 max | 0.75 max | 0.040 max | 0.030 max | 18 – 20 | - | 8 – 11 | - |
STEEL 304 WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:
| Density | 8.0 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 75000, MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000, MPa – 205 |
| Elongation | 35 % |
TYPES OF STAINLESS STEEL 304 WIRE :
- Stainless Steel 304 Wire Bobbin
- Stainless Steel 304 Wire Coil
- Stainless Steel 304 Filler Wire
- Stainless Steel 304 Welding Wire
- SS 304 Wire Coil
- SS 304 Wire Bobbin
- AISI 304 Wire
- SS UNS S30400 Wire
- SS Nr. 1.4301 Wire
- UNS S30400 Filler Wire
- UNS S30400 Wire Bobbin
- AISI 304 Filler Wire
- SS 304 Wiremesh
- AISI 304 Wire Bobbin
Stainless Steel 304L Wire, UNS S30403 Wiremesh, SS 304L Filler Wire, SS 304L Welding Wire, SS 304L Coils
ASTM A164 Stainless Steel 304L Wire, werkstoff nr. 1.4306/1.4307 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.
| Standard | SS 304L |
| UNS | S30403 |
| WERKSTOFF NR. | 1.4306/1.4307 |
| AFNOR | Z3CN18-10 |
| JIS | SUS 304L |
| GOST | 03X18H11 |
| BS | 304S11 |
| EN | X2CrNi18-9 / X2CrNi19-11 |
STAINLESS STEEL 304L WIRE SPECIFICATION :
Standard : 304L / 1.4306 / 1.4307
Range : 0.10mm to 8.00mm Required Size
Designation : ASTM A164, ASME SA164
Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh
Finish: Soft annealed – ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)
UNS S30403 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| 304l | 0.035 max | 2 max | 0.75 max | 0.040 max | 0.030 max | 18 – 20 | - | 8 – 13 | - |
STEEL 304L WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:
| Density | 8.0 g/cm3 |
| Melting Point | 1400 °C (2550 °F) |
| Tensile Strength | Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
| Elongation | 35 % |
TYPES OF STAINLESS STEEL 304L WIRE :
- Stainless Steel 304L Wire Bobbin
- Stainless Steel 304L Wire Coil
- Stainless Steel 304L Filler Wire
- Stainless Steel 304L Welding Wire
- SS 304L Wire Coil
- SS 304L Wire Bobbin
- AISI 304L Wire
- SS UNS S30403 Wire
- SS Nr. 1.4306 Wire
- UNS S30403 Filler Wire
- UNS S30403 Wire Bobbin
- AISI 304L Filler Wire
- SS 304L Wiremesh
- AISI 304L Wire Bobbin
ASTM A164 Stainless Steel 310 Wire, werkstoff nr. 1.4841 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.
| Standard | SS 310 |
| UNS | S31000 |
| WERKSTOFF NR. / DIN | 1.4841 |
STAINLESS STEEL 310 WIRE SPECIFICATION :
Standard : 310 / 1.4841
Range : 0.10mm to 8.00mm Required Size
Designation : ASTM A164, ASME SA164
Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh
Finish: Soft annealed – ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)
UNS S31000 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| 310 | 0.25 max | 2 max | 1.50 max | 0.045 max | 0.03 max | 24 – 26 | - | 19 – 22 | - |
STEEL 310 WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:
| Density | 8.0 g/cm3 |
| Melting Point | 1454 °C (2650 °F) |
| Tensile Strength | Psi – 75000 , MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000 , MPa – 205 |
| Elongation | 35 % |
TYPES OF STAINLESS STEEL 310 WIRE :
- Stainless Steel 310 Wire Bobbin
- Stainless Steel 310 Wire Coil
- Stainless Steel 310 Filler Wire
- Stainless Steel 310 Welding Wire
- SS 310 Wire Coil
- SS 310 Wire Bobbin
- AISI 310 Wire
- SS UNS S31000 Wire
- SS Nr. 1.4841 Wire
- UNS S31000 Filler Wire
- UNS S31000 Wire Bobbin
- AISI 310 Filler Wire
- SS 310 Wiremesh
- AISI 310 Wire Bobbin
Stainless Steel 310S Wire, UNS S31008 Wiremesh, SS 310S Filler Wire, SS 310S Welding Wire, SS 310S Coils
ASTM A164 Stainless Steel 310S Wire, werkstoff nr. 1.4845 Wiremesh, Filler Wire, Welding Wire, Wire Bobbin & Wire Coil Suppliers & Exporters.
| Standard | SS 310S |
| UNS | S31008 |
| WERKSTOFF NR. / DIN | 1.4845 |
STAINLESS STEEL 310S WIRE SPECIFICATION :
Standard : 310S / 1.4845
Range : 0.10mm to 8.00mm Required Size
Designation : ASTM A164, ASME SA164
Type : Wire Bobbin, Wire Coil, Filler Wire, Coils, Wiremesh
Finish: Soft annealed – ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish)
UNS S31008 WIREMESH, FILLER WIRE & WIRE BOBBIN CHEMICAL COMPOSITION:
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| 310S | 0.08 max | 2 max | 1.50 max | 0.045 max | 0.03 max | 24 – 26 | - | 19 – 22 | - |
STEEL 310S WIREMESH, WIRE COIL MECHANICAL & PHYSICAL PROPERTIES:
| Density | 8.0 g/cm3 |
| Melting Point | 1454 °C (2650 °F) |
| Tensile Strength | Psi – 75000, MPa – 515 |
| Yield Strength (0.2%Offset) | Psi – 30000, MPa – 205 |
| Elongation | 35 % |
TYPES OF STAINLESS STEEL 310S WIRE :
- Stainless Steel 310S Wire Bobbin
- Stainless Steel 310S Wire Coil
- Stainless Steel 310S Filler Wire
- Stainless Steel 310S Welding Wire
- SS 310S Wire Coil
- SS 310S Wire Bobbin
- AISI 310S Wire
- SS UNS S31008 Wire
- SS Nr. 1.4845 Wire
- UNS S31008 Filler Wire
- UNS S31008 Wire Bobbin
- AISI 310S Filler Wire
- SS 310S Wiremesh
- AISI 310S Wire Bobbin
Material Grade
| Material | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| Finish | Thickness | Characteristics | Applications |
| No. 1 | 3.0mm~50.0mm | Finished by hot-rolling, annealing and pickling, characterized by white pickled surface | Chemical industry equipment, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface | General Application Medical Instruments, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware, architectural purpose |
| No. 4 | 0.4mm~3.0mm | Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes | Milk & Food processing facilities, Hospital Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
| HL(Hair Line) | 0.4mm~3.0mm | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware vehicles |
Chemical Composition
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Nb |
|
201 |
≤0.15 |
≤1.0 |
5.50-7.50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3.50-5.50 |
- |
- |
0.05-0.25 |
- |
- |
|
202 |
≤0.15 |
≤1.0 |
7.50-10.00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4.00-6.00 |
- |
- |
0.05-0.25 |
- |
- |
|
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6.00-8.00 |
- |
- |
≤0.1 |
- |
- |
|
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
|
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
|
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304H |
0.04-0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0.10-0.16 |
- |
- |
|
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6.00-9.00 |
- |
- |
- |
1.00-3.00 |
- |
|
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10.50-13.00 |
- |
- |
- |
- |
- |
|
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22.00-24.00 |
12.00-15.00 |
- |
- |
- |
- |
- |
|
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24.00-26.00 |
19.00-22.00 |
- |
- |
- |
- |
- |
|
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0.10-0.16 |
- |
- |
|
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
|
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11.00-15.00 |
3.00-4.00 |
- |
- |
- |
- |
|
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0.7 |
- |
- |
- |
|
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
|
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
|
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4.50-6.50 |
2.50-3.50 |
- |
0.08-0.20 |
- |
- |
|
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24.00-26.00 |
6.00-8.00 |
3.00-5.00 |
- |
0.24-0.32 |
- |
- |
|
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19.00-23.00 |
23.00-28.00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
|
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14.00-16.50 |
Other |
- |
- |
- |
- |
- |
|
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
|
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
|
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
420J1 |
0.16-0.25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
420J2 |
0.26-0.40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
|
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
440A |
0.60-0.75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440B |
0.75-0.95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440C |
0.95-1.2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
441 |
≤0.03 |
0.2-0.8 |
≤0.7 |
≤0.03 |
≤0.015 |
17.50-18.50 |
- |
≤0.5 |
0.1-0.5 |
≤0.025 |
- |
0.3+3C-0.9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.
