Incoloy 800h 800ht 028 800 20 825 926 Alloy (Pelat kawat Pipa Bar)
Katerangan pondok:
Incoloy825 Alloy Bar Uns No8825
| spésifikasi | : | ASTM B446 / ASTM SB446 |
| Diménsi | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Ukuran | : | 5 mm Nepi ka 500 mm |
| diaméterna | : | 0,1 mm nepi ka 100 mm |
| Panjangna | : | 100 mm Pikeun 3000 mm Panjang & luhur |
| Bérés | : | hideung, caang digosok, kasar ngancik, NO.4 finish, Matt finish, BA finish |
| Toleransi | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 atanapi sakumaha per sarat klien ' |
| Wangun | : | Buleud, Square, Hex (A / F), Rectangle, Billet, Ingot, Forging jsb. |
Jinis-jinisInconel 625 Bars/ Batang
 | Inconel 625 Caang Bar | Inconel 625 Caang Bar 625 Inconel Caang Bar Inconel alloy 625 caang Bar UNS N06625 Inconel Caang Bar WERKSTOFF NR. 2.4856 Caang Bar ASTM B446 625 Inconel Caang Bar |
 | Inconel 625 Hex Bar | Inconel 625 Hex Bar 625 Inconel héksagonal Bar 625 Inconel Alloy Hex Bar UNS N06625 Inconel héksagonal Bar ASTM B446 625 Inconel Hex Bar |
 | Inconel 625 pasagi Bar | Inconel 625 pasagi Bar 625 Inconel Square Bar 625 Inconel Galunggung Square Bar UNS N06625 Inconel Square Bar WERKSTOFF NR. 2.4856 pasagi Bar ASTM B446 625 Inconel Square Bar |
 | Inconel 625 Rectangular Bar | Inconel 625 Rectangular Bar 625 Inconel Rectangular Bar 625 Inconel Alloy Rectangular Bar UNS N06625 Inconel Rectangular Bar WERKSTOFF NR. 2.4856 Bar rectangular ASTM B446 625 Inconel Rectangular Bar |
 | Inconel 625 Datar Bar | Inconel 625 Datar Bar 625 Inconel Alloy Datar Bar 625 Inconel Datar Bar UNS N06625 Inconel Datar Bar WERKSTOFF NR. 2.4856 Datar Bar ASTM B446 625 Inconel Datar Bar |
 | Inconel 625 digosok Bar | Inconel 625 digosok Bar 625 Inconel digosok Bars 625 Inconel Alloy digosok Bar UNS N06625 Inconel digosok Bar WERKSTOFF NR. 2.4856 digosok Bar ASTM B446 625 Inconel digosok Bar |
 | Inconel 625 Threaded Bar | Inconel 625 Threaded Bar 625 Inconel Threaded Bar 625 Inconel Alloy Threaded Bar UNS N06625 Inconel Threaded Bar WERKSTOFF NR. 2.4856 Threaded Bar ASTM B446 625 Inconel Threaded Bar |
625 Inconel Babak BarKomposisi Kimia
| Kelas | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
| Inconel 625 | 0,10 max | 0,50 max | 0,50 max | – | 0.15 mnt | 5,0 max | – | 58,0 mnt | 20.0–23.0 |
Kelas Bahan
| Bahan | Standar ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410L 410 |
| Standar ASTM A480 | 302. 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S 03, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standar | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standar | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS309S, SUS309S, SUS309S, 1 J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J3L, SUS329J4L, SUS329J4 0, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Spésifikasi produk
| Bérés | Kandelna | Ciri | Aplikasi |
| No. 1 | 3.0mm ~ 50.0mm | Réngsé ku panas-rolling, annealing na pickling, dicirikeun ku permukaan pickled bodas | Parabot industri kimia, tank industri |
| No. 2B | 0.3mm ~ 6.0mm | Réngsé ku perlakuan panas, pickling sanggeus rolling tiis, dituturkeun ku garis pass kulit janten permukaan leuwih caang jeung lemes | Aplikasi Umum Alat Médis, Tableware |
| No BA (Bright Annealed) | 0.5mm ~ 2.0mm | perlakuan panas caang sanggeus rolling tiis | Parabot dapur, parabot dapur, tujuan arsitéktur |
| No. 4 | 0.4mm ~ 3.0mm | Polishing kalawan No.. 150 mun No.180 bolong abrasives. The finish pang populerna | fasilitas ngolah susu & dahareun, alat-alat rumah sakit, bak mandi |
| No. 8 | 0.5mm ~ 2.0mm | Permukaan reflektif sapertos eunteung ku ngagosok nganggo abrasive anu langkung saé langkung ti 800 bolong | Reflektor, Eunteung, Interior-Exterior hiasan pikeun wangunan |
| HL (Garis Rambut) | 0.4mm ~ 3.0mm | Réngsé ku polishing linier kontinyu | Tujuan arsitéktur, escalators, kandaraan ware dapur |
Komposisi Kimia
| Kelas | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0,045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0,035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0,045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Lain | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0,024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0,025 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0,015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0,025 | - | 0.3+3C-0.9 |
UrangBungkus produk stainless steel sareng kertas anti karat sareng cincin baja pikeun nyegah karusakan.
Labél idéntifikasi ditandaan nurutkeun spésifikasi standar atanapi paréntah palanggan.
packing husus geus sadia sakumaha per sarat customer urang.
Pakét Coil Stainless Steel
Lambaran Stainless Steel / Paket Lempeng Stainless Steel
Pakét Jalur Stainless Steel
Paket Pangiriman
Perusahaan kami dumasar di Wuxi, ngumpul kota stainless steel industri di Cina.
Kami ngahususkeun dina coils stainless, cadar jeung piring, pipa stainless steel sarta fittings, tabung stainless steel, sarta ogé produk aluminium sarta produk tambaga.
produk urang geus kacida muji ku klien kami ti Éropa, Amerika, Wétan Tengah, Afrika jeung Asia Tenggara. Urang bakal nawiskeun produk kalapa sarta layanan komprehensif ka konsumén.
Stainless Steel Kelas: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 4, 4, 4, 4, 4, 4 30F, 440, 440c,
Kelas Paduan: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Hampang Steel, Aluminium, Alloy Steel, Karbon Steel, Special Nikel Alloys
Dina bentuk: Bar Bulat, Bar Square, Bar Heksagonal, Bar Datar, Sudut, Saluran, Profil, Kawat, Batang Kawat, Lembar, Piring, Pipa Seamless, Pipa ERW, Flanges, Fittings, jsb.
Q1: Naon stainless?
A: Stainless hartina euweuh tanda dina beungeut baja, atawa jenis baja nu teu ruksak ku hawa atawa cai jeung nu teu robah warna ka warna, spotless, tahan ka staining, rusting, pangaruh corrosive bahan kimia.
Q2: Dupi stainless hartosna euweuh rusting?
A: No, stainless hartina teu gampang meunang patri atawa Rusty, éta mibanda kamampuhan speical mun reisist staining, rusting sarta korosi.
Q3: Dupi anjeun nyadiakeun cadar stainless steel?
A: Sumuhun, urang nyadiakeun tipena béda cadar stainless steel, kalayan ketebalan Bulan ti 0.3-3.0mm. sarta dina finish béda.
Q4: Naha anjeun nampi cut kana jasa panjang?
A: Tangtosna, kapuasan customer mangrupikeun prioritas utama urang.
Q5: Upami abdi gaduh pesenan alit, naha anjeun nampi pesenan alit?
A: Henteu masalah, perhatian anjeun perhatian urang, jumlah leutik nu katampa.
Q6: Kumaha anjeun tiasa ngajamin kualitas produk anjeun?
A: Kahiji, ti mimiti pisan, urang geus geus dilaksanakeun sumanget kana pikiran maranéhanana, nyaéta kualitas hirup, pagawe profésional urang jeung staffs bakal nuturkeun nepi unggal hambalan dugi barang dipak ogé sarta shipped kaluar.
Q7: Dupi anjeun pak produk?
A: Jalma profésional ngalakukeun packing profésional, urang boga tipena béda packing pilihan pikeun konsumén, ékonomi hiji atawa hadé.
Q8: Naon nu peryogi kauninga ti customer saméméh cutatan akurat?
A: Pikeun hiji cutatan akurat, urang kudu nyaho kelas, ketebalan, ukuran, permukaan finish, warna jeung kuantitas pesenan anjeun, sarta ogé tujuan barang. Inpo produk ngaropéa bakal diperlukeun deui, kawas gambar, perenah jeung rencana. Teras kami bakal nawiskeun petik kalapa sareng inpormasi di luhur.
Q9: Jenis istilah pembayaran anjeun accpet?
A: Kami nampi T / T, West union, L / C.
Q10: Upami ieu pesenan leutik, anjeun bakal ngirim barang ka agén kami?
A: Sumuhun, urang dilahirkeun pikeun ngajawab masalah konsumén urang, urang bakal meunang barang aman ka gudang agén anjeun sarta ngirim anjeun gambar.
Q11: Naha anjeun ngan ukur ngadamel lambaran datar? Abdi hoyong ngadamel fabrikasi pikeun proyék énggal abdi.
A: No, urang utamana ngahasilkeun perlakuan permukaan lambar datar stainless steel, dina waktos anu sareng, urang rancang logam ngaropéa produk rengse sakumaha per gambar customer sarta rencana, teknisi urang bakal ngurus sésana.
Q12: Sabaraha coutries anjeun geus diékspor?
A: diékspor ka leuwih ti 50 nagara utamana ti Amérika, Rusia, Inggris, Kuwait, Mesir, Iran,
Turki, Yordania, jsb.
Q13: Kumaha carana abdi tiasa sababaraha sampel?
A: Sampel leutik di toko sareng tiasa nyayogikeun conto gratis. Catalgue sadia, paling
pola kami geus siap sampel di stock. sampel ngaropéa bakal nyandak ngeunaan 5-7days.
Q14: Naon pangiriman?
A: waktos pangiriman sampel urutan urang téh 5-7 poé. Pesenan wadahna sakitar 15-20 dinten.
Q15: Naon aplikasi ngeunaan Produk anjeun?
A: 1.elevator panto / kabin atawa na escalator urang sisi-témbok.
2. Wall cladding di jero atawa di luar kamar pasamoan / réstoran.
3.Fasad nalika cladding leuwih hal, kawas kolom di lobi.
4. Plafon di supermarket. 5.Dekoratif draws di sababaraha tempat hiburan.
Q16: Sabaraha lami Anjeun tiasa ngajamin pikeun Produk ieu / rengse?
A: jaminan Warna pikeun leuwih ti 10 taun. Sertipikat kualitas bahan asli tiasa
disadiakeun.
