TŠEPE E SEBELISANG 310S RUND BAR
Tlhaloso e Khutšoanyane:
TŠEPE E SEBELISANG 310S RUND BAR
TŠEPE E SEBELISANG 310S RUND BAR
310S Cold Rolled Stainless Steel Sheet 4*1500*C
Tšepe e sa hloekang 310S / tšepe e sa hloekang 310H / AISI 310S/H / 1.4845
Alloy stainless steel 310 (UNS S31000) ke tšepe e sa hloekang ea austenitic e ileng ea ntlafatsoa hore e sebelisoe lits'ebetsong tse thibelang ho bola ha mocheso o phahameng. Alloy ena ke bopaki ba oxidation ho fihlela mocheso oa 2010oF (1100oC) tlas'a maemo a bonolo a cyclical.
Ka lebaka la boleng bo phahameng ba chromium le nickel e itekanetseng, Alloy stainless steel 310 e boetse e hanyetsa sulfidation hape e ka sebelisoa maemong a itekanetseng a carbonisation.
Libaka tse boima haholo tsa "carbonisation atmospheres" tsa lisebelisoa tsa ho sebetsa ka mocheso hangata li hloka li-alloys tsa nickel tse kang 330 (UNS N08330). Alloy 310 e ka sebelisoa bakeng sa lits'ebetso tse kenyelletsang oxidation e bobebe, nitrate, samente le libaesekele tse futhumetseng. Alloy 310 e boetse e sebelisoa lits'ebetsong tsa cryogenic tse nang le matla a tlase a makenete le boima ba ho fihla ho -450oF (-268 ° C). Ha e futhumala ho fihla lipakeng tsa 1202 - 1742oF (650 - 950oC), motsoako ona o tlas'a pula ea sigma-phase. Ho kopanya ka tharollo ho 2012 - 2102oF (1100 - 1150oC) ho tla tsosolosa tekanyo e itseng ea boima.
Stainless steel 310S (UNS S31008) ke mofuta oa motsoako o nang le khabone e tlase. E sebelisoa hobane ho bonolo ho e etsa. stainless steel 310H (UNS S31009) ke phetoho e nang le khabone e ngata e ntlafalitsoeng ho fihlela khanyetso e ntle ea creep. Maemong a mangata, boholo ba lijo-thollo le lihlahisoa tsa carbon tsa thepa li lumellana le litlhoko tse peli tsa tšepe e sa hloekang 310S le 310H.
Alloy 310 e bonolo ho tjheseletsa le ho sebetsa ka mekhoa e tloaelehileng ea tlhahiso.
Lintho tse entsoeng ka tšepe ea 310S / 310H
ASTM A240 tšepe e sa hloekang 310 / tšepe e sa hloekang 310S / thepa e sa hloekang ea 310H e na le:
• tšepe e sa hloekang 310, nomoro ea thepa 1.4845
• DIN/EN: X8CrNi25-21
• UNS S31000 / UNS S31008 / UNS 31009
Sheba mefuta ea rona e felletseng ea liphaephe tse tjheselitsoeng tsa tšepe tse 310/310S/310H, lipeipi tse se nang sekoli 310/310S/310H, lipeipi tse se nang sekoli 310/310S/310H tse kenelletseng, tšepe e sa hloekang 310/310S/310H 310/310S/310H / 310S/310H foufetseng flanges, tšepe e sa hloekang 310/310S/310H tjheseletsa molala flanges, tšepe e sa hloekang 310/310S/310H flat tjheseletsa flanges, tšepe e sa hloekang 310/310S/310H prewelding flanges, 30 stainless steel/11S tšepe 3 H / 110 tšepe stainless 310/310S/310H tšepe bareng.
310 Tšepe e Hloekileng
- ASTM A 240, A 276, A 312
- UNS S31000 / UNS S31008
- DIN 1.4845
Ke mefuta efe ea 310/310S Stainless Steel e fumanehang?
- Leqephe
- Letlapa
- Sebaka
- Pipe & Tube
- Lisebelisoa
- Li-elbows, li-tee, li-stub-end, li-returns, li-caps, lifapano, li-reducers, li-pipe nipples, joalo-joalo.
- Weld Wire (AWS E310-16 kapa ER310)
310/310S Stainless Steel Overview
Stainless steel 310/310S ke motsoako o thibelang mocheso o matla o hanyetsanang le oxidation tlas'a maemo a bonolo a cyclic ka 2000 ° F. Likahare tsa eona tse phahameng tsa chromium le nickel li fana ka khanyetso ea kutu e bapisoang, khanyetso e phahameng ea oxidation le ho bolokoa ha karolo e kholoanyane ea matla a mocheso oa kamore ho feta li-alloys tse tloaelehileng tsa austenitic joalo ka Mofuta oa 304. Stainless 310 e atisa ho sebelisoa ka mocheso oa cryogenic, ka thata e babatsehang ho -450 °F, le ho kenella ha makenete ka tlase.
**Joalo ka ha u bona ka tlase, Kereiti ea 310S ke mofuta oa khabone e tlase oa grade 310. 310S ha e ratehe ho khoboheloa le ho khothatsoa ts'ebeletso.
310 UNS S31000 Sebopeho sa Lik'hemik'hale,%
| Cr | Ni | C | Si | Mn | P | S | Mo | Cu | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 24.0-26.0 | 19.2-22.0 | .25 Max | 1.50 Max | 2.00 Max | .045 Max | .03 Max | .75 Max | .50 Max | Ho leka-lekanya |
310S UNS S31008 Sebopeho sa Lik'hemik'hale,%
| Cr | Ni | C | Si | Mn | P | S | Mo | Cu | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 24.0-26.0 | 19.2-22.0 | .08 Max | 1.50 Max | 2.00 Max | .045 Max | .03 Max | .75 Max | .50 Max | Ho leka-lekanya |
Litšobotsi tsa 310/310S Stainless ke life?
- Ho hanyetsa oxidation ho 2000°F
- Matla a itekanetseng mochesong o phahameng
- Ho hanyetsa ho corrosion e chesang
- Matla le ho tiea ha mocheso oa cryogenic
Likopo tse Tloaelehileng tsa 310/310S Stainless
- Kilns
- Lichelete tsa Mocheso
- Radiant Tubes
- Muffles, retorts, annealing likoahelo
- Li-tube hangers bakeng sa ho hloekisa petroleum le li-boiler tsa mouoane
- Likarolo tsa ka hare tsa mashala gasifier
- Saggers
- Likarolo tsa sebōpi, mabanta a conveyor, rollers, linings tsa ontong, fans
- Lisebelisoa tsa ho lokisa lijo
- Mehaho ea cryogenic
Ho etsoa ka Stainless 310/310S
Mofuta oa 310/310S o etsoa habonolo ka mekhoa e tloaelehileng ea khoebo. Ha ho bapisoa le tšepe ea carbon, litšepe tse sa hloekang li thata ho feta 'me li atisa ho sebetsa ka thata ka potlako.
Mofuta oa 310/310S o ka chesetsoa ho sebelisoa lits'ebetso tsohle tse tloaelehileng tsa welding.
Thepa ea Mechini
Moemeli oa Tensile Properties
| Mocheso, °F | Matla a ho qetela a Tensile, ksi | .2% Matla a Puno, ksi | Elongation Percent |
|---|---|---|---|
| 70 | 80.0 | 35.0 | 52 |
| 1000 | 67.8 | 20.8 | 47 |
| 1200 | 54.1 | 20.7 | 43 |
| 1200 | 35.1 | 19.3 | 46 |
| 1600 | 19.1 | 12.2 | 48 |
Thepa e Tloaelehileng ea Creep-Rupture
| Mocheso, °F | Minimum Creep 0.0001%/hr, ksi | 100,000 Hour Rupture Matla, ksi |
|---|---|---|
| 12000 | 14.9 | 14.4 |
| 1400 | 3.3 | 4.5 |
| 1600 | 1.1 | 1.5 |
| 1800 | .28 |
Kereiti ea lintho tse bonahalang
| Lintho tse bonahalang | ASTM A240 e tloaelehileng | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 400S 409 |
| ASTM A480 e tloaelehileng | 302. 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S30601, S335161 03, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 E tloaelehileng | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 E tloaelehileng | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS304S, SUS301S 15J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3US44 SUS405L, SUS404, SUS404, SUS4040, SUS404, SUS 40, S15 SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Tlhaloso ea Sehlahisoa
| Qetella | Botenya | Litšobotsi | Lisebelisoa |
| No. 1 | 3.0mm ~ 50.0mm | E phethiloe ka ho chesa, ho phunya le ho khetha, ho khetholloang ka holim'a metsi a masoeu | Lisebelisoa tsa indasteri ea lik'hemik'hale, litanka tsa indasteri |
| No. 2B | 0.3mm ~ 6.0mm | E phethiloe ke mocheso kalafo, pickling ka mor'a hore batang rolling, lateloa ke letlalo feta mola ho ba ho feta e khanyang le boreleli holim'a metsi | Lisebelisoa tsa Kakaretso tsa Kopo ea Bongaka, Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Phekolo e khanyang ea mocheso ka mor'a hore ho be le serame | Lisebelisoa tsa kichineng, thepa ea kichineng, morero oa ho haha |
| No.4 | 0.4mm ~ 3.0mm | Ho pentša ka No. 150 ho ea ho No.180 mesh abrasives. Liphetho tse tsebahalang haholo | Lisebelisoa tsa ho lokisa Lebese le Lijo, Lisebelisoa tsa Sepetlele, Bate |
| No.8 | 0.5mm ~ 2.0mm | Sebaka se benyang se kang seipone ka ho bentša ka li-abrasives tse ntle ho feta 800 mesh | Reflector, seipone, ka hare-kantle mokhabiso bakeng sa moaho |
| HL(Moriri) | 0.4mm ~ 3.0mm | E phethetsoe ka ho bentša ho sa feleng | Merero ea meralo, li-escalator, likoloi tsa thepa ea kichine |
Sebopeho sa Lik'hemik'hale
| Kereiti | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5,50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6,50 | 2.50-3,50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Tse ding | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0,40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0,75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0,95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Ronaphuthela lihlahisoa tsa tšepe tse sa hloekang ka pampiri e khahlanong le mafome le mehele ea tšepe ho thibela tšenyo.
Li-labels tsa boitsebiso li tšoailoe ho latela litlhaloso tse tloaelehileng kapa litaelo tsa moreki.
Ho pakela ho khethehileng hoa fumaneha ho latela tlhoko ea moreki.
Sephutheloana sa Coil ea tšepe e se nang tšepe
Letlapa la Letlapa / Sephutheloana sa Plate ea tšepe e sa hloekang
Sephutheloana sa Strip Strip
Sephutheloana sa Thomello
Khamphani ea rona e thehiloe Wuxi, 'me e bokella toropo ea tšepe e sa hloekang ea indasteri naheng ea China.
Re ne re ikhetha ka li-coil tse sa hloekang, lishiti le poleiti, phala ea tšepe e sa hloekang le li-fittings, li-tubes tsa tšepe e sa hloekang, hammoho le lihlahisoa tsa aluminium le lihlahisoa tsa koporo.
Lihlahisoa tsa rona li rorisitsoe haholo ke bareki ba rona ba tsoang Europe, Amerika, Middle East, Afrika le Asia Boroa-bochabela. Re tla fana ka lihlahisoa tsa tlhōlisano le tšebeletso e pharaletseng ho bareki.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 4, 4, 4, 3, 4, 4 0, 430F, 440, 440c,
Alloy Grade: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
Ka sebopeho sa : Li-Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings, joalo-joalo.
Q1: Stainless ke eng?
K: Stainless e bolela hore ha ho na matšoao holim'a tšepe, kapa mofuta oa tšepe o sa senngoeng ke moea kapa metsi, 'me o sa fetole 'mala, o se nang letheba, o hanyetsanang le matheba, mafome, le phello e senyang ea lik'hemik'hale.
Q2: Na ho se hloeke ho bolela hore ha ho na mafome?
K: Che, ha ho na letheba ho bolela hore ha ho bonolo ho ba le matheba kapa ho ba mafome, e na le bokhoni bo ikhethang ba ho hanela matheba, mafome le ho bola.
Q3: Na u fana ka lishiti tsa tšepe tse sa hloekang?
A: E, re fana ka mefuta e fapaneng ea lishiti tsa tšepe tse sa hloekang, tse nang le mefuta ea botenya ho tloha ho 0.3-3.0mm. le ka liphetho tse fapaneng.
Q4: Na u amohela tšebeletso ea ho khaola ho isa bolelele?
K: Ehlile, khotsofalo ea bareki ke eona ntho e tlang pele bophelong ba rona.
Q5: Haeba ke na le odara e nyane, na u amohela odara e nyane?
A: Ha se bothata, seo u amehileng ka sona ke seo re amehileng ka sona, litekanyetso tse nyane lia amoheloa.
Q6: U ka netefatsa boleng ba sehlahisoa sa hau joang?
A: Taba ea pele, ho tloha qalong, re se re kentse moea likelellong tsa bona, ke hore boleng ke bophelo, basebetsi ba rona ba litsebi le basebetsi ba tla latela mohato o mong le o mong ho fihlela thepa e phuthetsoe hantle le ho romelloa kantle.
Q7: Na u tla paka lihlahisoa?
A: Batho ba litsebi ba paka litsebi, re na le mefuta e fapaneng ea ho paka ka boikhethelo ho bareki, ba moruo kapa ba molemo.
Q8: U hloka ho tseba eng ho tsoa ho moreki pele u qotsa ka nepo?
K: Bakeng sa khotheishene e nepahetseng, re hloka ho tseba kereiti, botenya, boholo, pheletso ea bokaholimo, 'mala le bongata ba odara ea hau, hammoho le moo thepa e eang teng. Lintlha tse ikhethileng tsa sehlahisoa li tla hlokahala haholoanyane, joalo ka ho taka, moralo le moralo. Joale re tla fana ka khotheishene ea tlholisano le tlhaiso-leseling e kaholimo.
Q9: Ke nako ea mofuta ofe ea tefo eo u e amohelang?
A: Re amohela T/T, West union, L/C.
Q10: Haeba ena e le taelo e nyane, na o tla isa thepa ho moemeli oa rona?
A: E, re tsoaletsoe ho rarolla mathata a bareki ba rona, re tla fumana thepa ka mokhoa o sireletsehileng sebakeng sa polokelo ea moemeli oa hau ebe re u romella litšoantšo.
Q11: Na u etsa letlapa le bataletseng feela? Ke batla ho etsa moralo oa morero oa ka o mocha.
A: Che, haholo-holo re hlahisa phekolo ea letlapa la tšepe e sa hloekang, ka nako e ts'oanang, re etsa sehlahisoa se entsoeng ka tšepe se entsoeng ka mokhoa o hlophisitsoeng ho ea ka setšoantšo le moralo oa bareki, setsebi sa rona se tla hlokomela tse ling kaofela.
Q12: Ke li-coutries tse kae tseo u seng u li rometse kantle ho naha?
A: E romelloa linaheng tse fetang 50 haholo-holo ho tsoa Amerika, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordane joalo-joalo.
Q13: Nka fumana disampole joang?
A: Mehlala e menyenyane ka lebenkeleng 'me e ka fana ka lisampole mahala. Catalgue e fumaneha, haholo
lipaterone re na le disampole loketse setokong. Mehlala e ikhethileng e tla nka matsatsi a 5-7.
Q14: Ho tsamaisoa ke eng?
A: Nako ea tlhahiso ea mohlala ke matsatsi a 5-7. Litaelo tsa setshelo li ka ba matsatsi a 15-20.
Q15: Ts'ebeliso ke efe ka Lihlahisoa tsa hau?
A: Lemati la 1.elevator/cabin kapa le lebota le ka lehlakoreng la escalator.
2. Ho roala lebota ka hare kapa ka ntle phaposing ea kopano/reschorente.
3.Facade ha u koahela ntho e itseng, joalo ka litšiea ka kamoreng ea baeti.
4.Ceiling ka lebenkeleng le leholo. 5.Decorative hulela libakeng tse ling tsa boithabiso.
Q16: U ka netefatsa nako e kae bakeng sa Sehlahisoa sena / Qetella?
A: Tiisetso ea mebala ka lilemo tse fetang 10. Setifikeiti sa boleng ba thepa ea mantlha e ka
fuwa.
