Inkoloy 800H, e tsejoang hape e le "Alloy 800H", e khethiloe e le UNS N08810 kapa DIN W.Nr. 1.4958. E na le hoo e batlang e le lik'hemik'hale tse tšoanang le tsa Alloy 800 ntle le hore e hloka ho eketsa carbon e phahameng ho fella ka thepa e ntlafetseng ea mocheso o phahameng. Ha ho bapisoa leInkoloy 800, e na le litšoaneleho tse molemo tsa ho khitla le ho phatloha ha khatello ea kelello mochesong oa 1100°F [592°C] ho ea ho 1800°F [980°C]. Le hoja Inkoloy 800 e atisa ho kenngoa hoo e ka bang 1800 ° F [980°C], Inkoloy 800H e lokela ho kenngoa hoo e ka bang 2100 ° F [1150°C]. Ntle le moo, Alloy 800H e na le boholo ba lijo-thollo tse mahoashe ho latela ASTM 5.
1. Litlhoko tsa Sebopeho sa Lik'hemik'hale
| Sebopeho sa Lik'hemik'hale sa Inkoloy 800,% | |
|---|---|
| Nickel | 30.0-35.0 |
| Cromium | 19.0-23.0 |
| Tšepe | ≥39.5 |
| Khabone | 0.05-0.10 |
| Aluminium | 0.15-0.60 |
| Titanium | 0.15-0.60 |
| Manganese | ≤1.50 |
| Sebabole | ≤0.015 |
| Silicone | ≤1.00 |
| Koporo | ≤0.75 |
| Al+Ti | 0.30-1.20 |
2. Mechanical Properties ea Inkoloy 800H
ASTM B163 UNS N08810, Incoloy 800H liphaephe tse se nang mokoloko, 1-1/4″ x 0.083″(WT) x 16.6′(L).
| Matla a Tensile, min. | Kotulo Matla, min. | Elongation, min. | Thata, min. | ||
|---|---|---|---|---|---|
| Mpa | ksi | Mpa | ksi | % | HB |
| 600 | 87 | 295 | 43 | 44 | 138 |
3. Thepa ea 'Mele ea Inkoloy 800H
| Botenya | Melting Range | Mocheso o khethehileng | Ho hanyetsa Motlakase | ||
|---|---|---|---|---|---|
| g/cm3 | °C | °F | J/kg. k | Btu/lb.°F | µΩ·m |
| 7.94 | 1357-1385 | 2475-2525 | 460 | 0.110 | 989 |
4. Mefuta ea Lihlahisoa le Maemo a Inkoloy 800H
| Sehlahisoa se Tsoang ho | Standard |
|---|---|
| Molamu le Bar | ASTM B408, EN 10095 |
| Plate, Sheet & Strip | ASTM A240, A480, ASTM B409, B906 |
| Pipe & Tube e sa tsitsang | ASTM B829, B407 |
| Pipe e cheselitsoeng le Tube | ASTM B514, B515, B751, B775 |
| Lisebelisoa tse cheselitsoeng | ASTM B366 |
| Ho qapa | ASTM B564, DIN 17460 |
Nako ea poso: Oct-23-2020