Monel 400 Stainless Steel Round Bar
Tlhaloso e Khutšoanyane:
Re thepa le ho romela kantle ho naha ea Monel 400 Round Bar Stainless steel material ka mefuta e mengata, sebopeho le boholo.
→ Monel 400 Round Bar round Bars
→ Monel 400 Round Bar Square Bars
→ Monel 400 Round Bar Flat Bars
→ Monel 400 Round Bar Threaded Bars
Monel 400Stainless Steel Round Bar
Monel 400 e fumaneha ka mefuta efe?
- Leqephe
- Letlapa
- Sebaka
- Pipe & Tube (tse tjheselitsoeng le tse se nang seam)
- Li-fittings (ke hore li-flanges, li-slip-ons, li-blind, li-weld-necks, lapjoints, li-welding melala tse telele, li-socket welds, li-elbows, li-tee, li-stub-end, li-returns, li-caps, lifapano, li-reducers le li-nipples tsa pipe)
- Mohala
Litšobotsi tsa Monel 400 ke life?
- E hanana le metsi a leoatle le mouoane ka mocheso o phahameng
- Khanyetso e babatsehang ho metsi a letsoai a phallang ka potlako kapa metsi a leoatle
- Ho hanyetsa ho hoholo ha khatello ea maikutlo ho phatloha hoa metsi a mangata a hloekileng
- Haholo-holo e hanyetsana le hydrochloric le hydrofluoric acid ha e felloa ke moea
- E fana ka khanyetso e itseng ho hydrochloric le sulfuric acid ka mocheso o itekanetseng le ho tsepamisa mohopolo, empa ha se hangata e leng thepa ea khetho bakeng sa li-acid tsena.
- Ho hanyetsa ka ho fetisisa ho sa nke lehlakore le letsoai la alkaline
- Ho hanana le chloride ho bakile khatello ea maikutlo ho bola
- Thepa e ntle ea mochini ho tloha mocheso o tlase ho zero ho fihla ho 1020° F
- Ho hanyetsa ho phahameng ho alkalis
Sebopeho sa Lik'hemik'hale,%
| C | Mn | S | Si | Ni | Cu | Fe |
|---|---|---|---|---|---|---|
| .30 max | 2.00 max | .024 boholo | .50 max | 63.0 mets | 28.0-34.0 | 2.50 max |
Monel 400 e hanyetsanang le Corrosion
Alloy 400 e batla e se na chloride ion stress corrosion cracking libakeng tse tloaelehileng. Ka kakaretso, khanyetso ea eona ea kutu e ntle haholo ho fokotsa tikoloho, empa e futsanehile maemong a oxidizing. Ha e na thuso ho oxidizing acid, joalo ka asiti ea nitric le nitrous. Leha ho le joalo, e hanyetsana le li-alkalis tse ngata, letsoai, metsi, lihlahisoa tsa lijo, lintho tse phelang le maemo a sepakapaka ka mocheso o tloaelehileng le o phahameng.
Alloy ena ea nickel e hlaseloa ka likhase tse nang le sebabole tse ka holimo ho hoo e ka bang 700 ° F 'me sebabole se qhibilihisitsoeng se hlasela motsoako ka mocheso o fetang 500 ° F.
Monel 400 e fana ka khanyetso e ts'oanang ea kutu joaloka nickel empa e na le likhatello tse phahameng tsa ho sebetsa le mocheso le ka theko e tlaase ka lebaka la bokhoni ba eona bo phahameng ba ho etsoa ka mechine.
Monel 400 e sebelisoa lits'ebetsong life?
- Boenjiniere ba metsing
- Lisebelisoa tsa ho lokisa lik'hemik'hale le hydrocarbon
- Litanka tsa peterole le metsi a hloekileng
- Lithako tsa petroleum tse tala
- Licheso tse futhumatsang moea
- Li-heaters tsa metsi a futhumatsang metsi le lisebelisoa tse ling tsa mocheso
- Li-valve, lipompo, li-shafts, li-fittings le li-fasteners
- Lisebelisoa tsa mocheso oa indasteri
- Li-solvents tse nang le chlorinated
- Litora tsa ho tšeloa ka oli e tala
Kereiti ea lintho tse bonahalang
| Lintho tse bonahalang | ASTM A240 e tloaelehileng | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 400S 409 |
| ASTM A480 e tloaelehileng | 302. 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31256, S3125, S3125 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S322504, S32205 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 E tloaelehileng | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 E tloaelehileng | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS301S SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317USSL362J SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LJ3, SUS4LJ3S4, SUS4L4, SUS404, SUS4054 SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Tlhaloso ea Sehlahisoa
| Qetella | Botenya | Litšobotsi | Lisebelisoa |
| No. 1 | 3.0mm ~ 50.0mm | E phethiloe ka ho chesa, ho phunya le ho khetha, ho khetholloang ka holim'a metsi a masoeu | Lisebelisoa tsa indasteri ea lik'hemik'hale, litanka tsa indasteri |
| No. 2B | 0.3mm ~ 6.0mm | E phethiloe ke mocheso kalafo, pickling ka mor'a hore batang rolling, lateloa ke letlalo feta mola ho ba ho feta e khanyang le boreleli holim'a metsi | Lisebelisoa tsa Kakaretso tsa Kopo ea Bongaka, Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Phekolo e khanyang ea mocheso ka mor'a hore ho be le serame | Lisebelisoa tsa kichineng, thepa ea kichineng, morero oa ho haha |
| No.4 | 0.4mm ~ 3.0mm | Ho pentša ka No. 150 ho ea ho No.180 mesh abrasives. Liphetho tse tsebahalang haholo | Lisebelisoa tsa ho lokisa Lebese le Lijo, Lisebelisoa tsa Sepetlele, Bate |
| No.8 | 0.5mm ~ 2.0mm | Sebaka se benyang se kang seipone ka ho bentša ka li-abrasives tse ntle ho feta 800 mesh | Reflector, seipone, ka hare-kantle mokhabiso bakeng sa moaho |
| HL(Moriri) | 0.4mm ~ 3.0mm | E phethetsoe ka ho bentša ho sa feleng | Merero ea meralo, li-escalator, likoloi tsa thepa ea kichine |
Sebopeho sa Lik'hemik'hale
| Kereiti | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5,50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6,50 | 2.50-3,50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Tse ding | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0,40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0,75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0,95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Ronaphuthela lihlahisoa tsa tšepe tse sa hloekang ka pampiri e khahlanong le mafome le mehele ea tšepe ho thibela tšenyo.
Li-labels tsa boitsebiso li tšoailoe ho latela litlhaloso tse tloaelehileng kapa litaelo tsa moreki.
Ho pakela ho khethehileng hoa fumaneha ho latela tlhoko ea moreki.
Sephutheloana sa Coil ea tšepe e se nang tšepe
Letlapa la Letlapa / Sephutheloana sa Plate ea tšepe e sa hloekang
Sephutheloana sa Strip Strip
Sephutheloana sa Thomello
Khamphani ea rona e thehiloe Wuxi, 'me e bokella toropo ea tšepe e sa hloekang ea indasteri naheng ea China.
Re ne re ikhetha ka li-coil tse sa hloekang, lishiti le poleiti, phala ea tšepe e sa hloekang le li-fittings, li-tubes tsa tšepe e sa hloekang, hammoho le lihlahisoa tsa aluminium le lihlahisoa tsa koporo.
Lihlahisoa tsa rona li rorisitsoe haholo ke bareki ba rona ba tsoang Europe, Amerika, Middle East, Afrika le Asia Boroa-bochabela. Re tla fana ka lihlahisoa tsa tlhōlisano le tšebeletso e pharaletseng ho bareki.
Sehlopha sa Stainless Steel: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 4 1, 3 420, 430, 430F, 440, 440c,
Alloy Grade: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
Ka sebopeho sa : Li-Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings, joalo-joalo.
Q1: Stainless ke eng?
K: Stainless e bolela hore ha ho na matšoao holim'a tšepe, kapa mofuta oa tšepe o sa senngoeng ke moea kapa metsi, 'me o sa fetole 'mala, o se nang letheba, o hanyetsanang le matheba, mafome, le phello e senyang ea lik'hemik'hale.
Q2: Na ho se hloeke ho bolela hore ha ho na mafome?
K: Che, ha ho na letheba ho bolela hore ha ho bonolo ho ba le matheba kapa ho ba mafome, e na le bokhoni bo ikhethang ba ho hanela matheba, mafome le ho bola.
Q3: Na u fana ka lishiti tsa tšepe tse sa hloekang?
A: E, re fana ka mefuta e fapaneng ea lishiti tsa tšepe tse sa hloekang, tse nang le mefuta ea botenya ho tloha ho 0.3-3.0mm. le ka liphetho tse fapaneng.
Q4: Na u amohela tšebeletso ea ho khaola ho isa bolelele?
K: Ehlile, khotsofalo ea bareki ke eona ntho e tlang pele bophelong ba rona.
Q5: Haeba ke na le odara e nyane, na u amohela odara e nyane?
A: Ha se bothata, seo u amehileng ka sona ke seo re amehileng ka sona, litekanyetso tse nyane lia amoheloa.
Q6: U ka netefatsa boleng ba sehlahisoa sa hau joang?
A: Taba ea pele, ho tloha qalong, re se re kentse moea likelellong tsa bona, ke hore boleng ke bophelo, basebetsi ba rona ba litsebi le basebetsi ba tla latela mohato o mong le o mong ho fihlela thepa e phuthetsoe hantle le ho romelloa kantle.
Q7: Na u tla paka lihlahisoa?
A: Batho ba litsebi ba paka litsebi, re na le mefuta e fapaneng ea ho paka ka boikhethelo ho bareki, ba moruo kapa ba molemo.
Q8: U hloka ho tseba eng ho tsoa ho moreki pele u qotsa ka nepo?
K: Bakeng sa khotheishene e nepahetseng, re hloka ho tseba kereiti, botenya, boholo, pheletso ea bokaholimo, 'mala le bongata ba odara ea hau, hammoho le moo thepa e eang teng. Lintlha tse ikhethileng tsa sehlahisoa li tla hlokahala haholoanyane, joalo ka ho taka, moralo le moralo. Joale re tla fana ka khotheishene ea tlholisano le tlhaiso-leseling e kaholimo.
Q9: Ke nako ea mofuta ofe ea tefo eo u e amohelang?
A: Re amohela T/T, West union, L/C.
Q10: Haeba ena e le taelo e nyane, na o tla isa thepa ho moemeli oa rona?
A: E, re tsoaletsoe ho rarolla mathata a bareki ba rona, re tla fumana thepa ka mokhoa o sireletsehileng sebakeng sa polokelo ea moemeli oa hau ebe re u romella litšoantšo.
Q11: Na u etsa letlapa le bataletseng feela? Ke batla ho etsa moralo oa morero oa ka o mocha.
A: Che, haholo-holo re hlahisa phekolo ea letlapa la tšepe e sa hloekang, ka nako e ts'oanang, re etsa sehlahisoa se entsoeng ka tšepe se entsoeng ka mokhoa o hlophisitsoeng ho ea ka setšoantšo le moralo oa bareki, setsebi sa rona se tla hlokomela tse ling kaofela.
Q12: Ke li-coutries tse kae tseo u seng u li rometse kantle ho naha?
A: E romelloa linaheng tse fetang 50 haholo-holo ho tsoa Amerika, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordane joalo-joalo.
Q13: Nka fumana disampole joang?
A: Mehlala e menyenyane ka lebenkeleng mme e ka fana ka lisampole mahala. Catalgue e fumaneha, haholo
lipaterone re na le disampole loketse setokong. Mehlala e ikhethileng e tla nka matsatsi a 5-7.
Q14: Ho tsamaisoa ke eng?
A: Nako ea tlhahiso ea mohlala ke matsatsi a 5-7. Litaelo tsa li-container li ka ba matsatsi a 15-20.
Q15: Tšebeliso ke efe ka Lihlahisoa tsa hau?
A: Lemati la 1.elevator/cabin kapa le lebota le ka lehlakoreng la escalator.
2. Ho roala lebota ka hare kapa ka ntle phaposing ea kopano/reschorente.
3.Facade ha u koahela ntho e itseng, joalo ka litšiea ka kamoreng ea baeti.
4.Ceiling ka lebenkeleng le leholo. 5.Decorative hulela libakeng tse ling tsa boithabiso.
Q16: U ka netefatsa nako e kae bakeng sa Sehlahisoa sena / Qetella?
A: Tiisetso ea mebala ka lilemo tse fetang 10. Setifikeiti sa boleng ba thepa ea mantlha e ka
fuwa.
