TP316H tuubo aan fiicneyn oo bir ah, sidoo kale loo yaqaan 1.4919 birta aan fiicnayn ee birta ah, waa austenitic chromium-nickel-molybdenum tuubo, marka lagu daro nitrogen iyo boron.
Waxaa loogu talagalay adeega heerkulka halkaasoo gurguurta iyo kadeedka guryaha dillaaca ay muhiim yihiin. 1.4919 tuubooyinka birta aan xidhnayn waxay leeyihiin iska caabin aad u wanaagsan heerkulka sare. Marka la barbar dhigo 316 aan lahayn, 316H aan lahayn waxay leedahay faa'iidooyin badan, sida caabbinta kulaylka, caabbinta aashitada iyo caabbinta daxalka. 316H birta aan la taaban karin waa kala duwanaansho kaarboon sare oo ah 316 bir ah oo aan lahayn, taas oo ka dhigaysa mid ku habboon jawiga heerkulka sare. Maaddada kaarboonka ee korodhay waxa ay keenaysaa xajin weyn iyo xoog dhalid.
Qaab dhismeedka austenitic ee TP316H birta aan birta lahayn ee aan sinnayn ayaa sidoo kale siinaya adkeysi aad u fiican, xitaa hoos heerkulka cryogenic. Waxaan bixinaa oo soo saareynaa tuubo 316H ah oo leh cabbir ballaaran, laga bilaabo 10.0mm ilaa 1219mm. Dhumucdiisuna waxay u dhaxaysaa 0.5mm ilaa 100mm. Dhererka guud ee tuubo kasta waa 5.8m, 6.0m, 11.8m, 12m. Dhererka ugu badan ee aan soo saarno waa ilaa 18m. Sheye Metal waxay soo saari kartaa tuubooyinka TP316H si adag oo waafaqsan heerka ASTM, EN, JIS, DIN si ay u buuxiso shuruudaha kala duwan ee macaamiisha.
TP316H birta aan xidhnayn ee birta ah ee aan sinnayn waa la gooyn karaa cabbirkeeda waxaana sidoo kale la heli karaa tuubo leh dhammaystir dhalaalaya. Wuxi Cepheus waxa uu leeyahay qalabka wax soo saarka horumarsan iyo qalabka tijaabada. Waxaan ku baari karnaa tuubooyinkayada aan fiicneyn oo leh 16 kanaalka mashiinka baaritaanka ultrasonic, 8 channel ultrasonic cillad detector, double channel ultrasonic flaw detector, eddy cillad hadda jira, mashiinka baaritaanka hydrostatic, ama raajada baarista.
Adeegyo badan oo habayn ah, oo ay ku jiraan feedh, rinjiyeynta, bir-ku-jiidashada, wax-ka-saarista ayaa dhammaan diyaar noo ah. Xoog farsamo, qalab horumarsan iyo farsamo xirfadeed, Wuxi Cepheus wuxuu soo saari karaa tuubada 316H tayada wanaagsanna waa la dammaanad qaaday. Biraha, waxaan nahay kuwo dhab ah.
| Tilmaamid | |
| Cabbirka | OD: 10.0 ~ 1219mm; WT: 0.5 ~ 100mm; Dhererka: 5.8m, 6m, 11.8m, 12m, Max.18m |
| Habka | Xumaan la'aan, Qabow Sawiran, Qabow duuban, Kulul duuban |
| Magac kala duwan | 1.4919 Dhuumaha X6CrNiMoB17-12-2 Dhuumaha UNS S31609 Dhuumaha |
| Dhammaad | PE (Dhammaadka Cad), BE (Beveled End), NPT, BW (Butt Weld End) |
| Dusha sare | Gargaar-qaadidda, suufka, cadayashada |
| Heerka | ASTM A312, ASTM A213, EN10216-5, DIN 17456, DIN 17458, JIS G3459, JIS G3463 |
| Miisaanka Aragtida (kg/m) | Miisaanka/mitirka = (OD-WT)*WT*0.02507LabadabaODiyoWTin mm. |
Fiiro gaar ah:
OD waa dhexroorka dibadda ee la cayimay.
WT waa dhumucda gidaarka ee la cayimay
Tuubooyinka birta ah waa in lagu guraa bilaash. Marka la isticmaalo annealing dhalaalaya, pickling looma baahna.
Cidhifyada bannaan ee la gooyay iyo kuwa la gooyay ayaa la goyn doonaa. Haddii cidhifyada dunta leh ama darafyada loo jeexjeexay alxanka la doonayo, faahfaahin bixi.
Shuruudaha Bixinta
| Nooca Xaaladda | Xaalada Dusha sare | |
| HFD | Kuleyl kulul oo dhammaatay ayaa lagu daaweeyay, hoos loo dhigay | Bir ahaan nadiif ah |
| CFD | Kulaylka qabow dhammeeyay ee la daaweeyay, la diiray | Bir ahaan nadiif ah |
| CFA | Qabow dhammeeyay dhalaal ayaa la dajiyay | Bir ahaan iftiimaya |
| CFG | Qabow dhammeeyey kulaylka lagu daaweeyay, dhulka | Metallically dhalaalaya dhul, nooca iyo heerka qallafsanaanta waa in lagu heshiiyaa wakhtiga baaritaanka iyo amarka b |
| CFP | Kulaylka qabow dhammeeyay ee la daweeyay, la safeeyey | Metallically dhalaalaya dhul, nooca iyo heerka qallafsanaanta waa in lagu heshiiyaa wakhtiga baaritaanka iyo amarka b |
| Fiiro gaar ah a: Isku darka shuruudaha kala duwan waxaa lagu heshiin karaa wakhtiga weydiinta iyo amarka; Fiiro gaar ah b: Weydiinta iyo dalabku waa inay tilmaamaan haddii shuruudaha qallafsanaantu ay khusayso dusha tuubada gudaha ama dibadda. | ||
Halabuurka Kiimikada
| Curiyaha | UNS S31609(316H) % | Dulqaadyada, % |
| C, max | 0.04 ilaa 0.10 | ±0.01 |
| Mn, max | 2.00 | ±0.04 |
| P, max | 0.045 | ±0.005 |
| S, max | 0.030 | ±0.003 |
| Si, max | 1.00 | ±0.05 |
| Ni | 11.0 ilaa 14.0 | ±0.15 |
| Cr | 16.0 ilaa 18.0 | ±0.20 |
| Mo | 2.00 ilaa 3.00 | ±0.10 |
Guryaha Makaanikada
| Alloy | xanaaq | Xoogga Jilicsan Min, MPa | Xoogga Wax-soo-saarka, 0.2% Ofset, min, MPa | Kordhinta 2 gudaha ama 50mm (ama 4D), min,% |
| UNS S31609 | Xalka waa la tirtiray | 515 | 205 | 35 |
Dulqaadyada Dhumucda gidaarka
| Naqshadeeye NPS | Dulqaadasho, % laga soo bilaabo magac ahaan | |
| Dhamaaday | Hoosta | |
| 1/8 ilaa 2-1/2 oo ay ku jiraan, dhammaan saamiga t/D | 20 | 12.5 |
| 3 ilaa 18 inch., t/D ilaa 5% oo ay ku jirto. | 22.5 | 12.5 |
| 3 ilaa 18 inch., t/D：5% | 15 | 12.5 |
| 20 iyo ka weyn, welded, dhammaan saamiga t/D | 17.5 | 12.5 |
| 20 iyo ka weyn, aan toos ahayn, t/D ilaa 5% oo ay ku jirto. | 22.5 | 12.5 |
| 20 iyo ka weyn, aan toos ahayn, t/D ：5% | 15 | 12.5 |
Fiiro gaar ah: t = Dhumucda darbiga magac ahaan; D = Dhexroorka Banaanka laga Dalbaday
Dulqaadyada dhexroorka ka baxsan
| Naqshadeeye NPS | Dulqaadyada dhexroorka ka baxsan | |||
| Dhamaaday | Hoosta | |||
| gudaha | mm | gudaha | mm | |
| 1/8 ilaa 1-1/2, oo ay ku jiraan | 1/64 (0.015) | 0.4 | 1/32 (0.031) | 0.8 |
| In ka badan 1-1/2 ilaa 4, oo ay ku jiraan | 1/32 (0.031) | 0.8 | 1/32 (0.031) | 0.8 |
| In ka badan 4 ilaa 8, oo ay ku jiraan | 1/16 (0.062) | 1.6 | 1/32 (0.031) | 0.8 |
| In ka badan 8 ilaa 18, oo ay ku jiraan | 3/32 (0.093) | 2.4 | 1/32 (0.031) | 0.8 |
| In ka badan 18 ilaa 26, oo ay ku jiraan | 1/8 (0.125) | 3.2 | 1/32 (0.031) | 0.8 |
| In ka badan 26 ilaa 34, oo ay ku jiraan | 5/32 (0.156) | 4 | 1/32 (0.031) | 0.8 |
| In ka badan 34 ilaa 48, oo ay ku jiraan | 3/16 (0.187) | 4.8 | 1/32 (0.031) | 0.8 |
Dulqaadka Toosan
| OD cayiman, gudaha. | Dhumucda gidaarka ee cayiman, gudaha | Curvature ugu badnaan 3ft, in. | Curvature ugu badnaan iyo Wadarta Dhererka, gudaha. |
| Ilaa 5.0 incl. | In ka badan 3% OD ilaa 0.5, oo ay ku jiraan. | 0.03 | 0.010 x dhererka, ft |
| In ka badan 5.0 ilaa 8.0, oo ay ku jiraan. | In ka badan 4% OD ilaa 0.75, oo ay ku jiraan. | 0.045 | 0.015 x dhererka, ft |
| In ka badan 8.0 ilaa 12.75, oo ay ku jiraan. | In ka badan 4% OD ilaa 1.0, oo ay ku jiraan. | 0.06 | 0.020 x dhererka, ft |
EN10216-5 1.4919 Dulqaadka Dhuumaha Birta Aan Xun
Dulqaadyada Dhexroorka Dibadeed (D) iyo Dhumucda gidaarka (T) ee 316H Qabow Dhammaystiran ee Beebka/Tuubada birta-la'aanta ah
| Dulqaadyada D≤219.1mm | Dulqaadyada ku saabsan T | ||
| Heerka Dulqaadka | Leexinta La Ogolyahay | Heerka Dulqaadka | Leexinta La Ogolyahay |
| D 3 | ± 0.75% ama ± 0.3mm hadba kan weyn | T 3 | ± 10% ama ± 0.2mm hadba kan weyn |
| D 4 a | ± 0.5% ama ± 0.1mm hadba kan weyn | T 4 a | ± 7.5% ama ± 0.15mm hadba kan weyn |
| Ogowa Fasalka dulqaadka D 4 iyo T 4 ayaa loo cayimay tuubooyinka lagu amray qaboojinta dhammaatay | |||
Dulqaadyada Dhexroorka Dibadda (D) iyo Dhumucda gidaarka (T)
| Dhexroor ka baxsan D | Dulqaadkaku D | Dulqaadyada ku saabsan T | ||
| mm | Heerka Dulqaadka | Leexinta La Ogolyahay | Heerka Dulqaadka | Leexinta La Ogolyahay |
| 30 ≤ D ≤ 219.1 | D 2 | ± 1.0% ama ± 0.5mm hadba kan weyn | T 1 | ± 15% ama ± 0.6mm hadba kan weyn b |
| T 2 | ± 12.5% ama ± 0.4mm hadba kan weyn | |||
| 219.1 ≤ D ≤ 610 | D 1 | ± 1.5% ama ± 0.75mm hadba kan weyn a | 22.5% -15% C | |
| T 1 | ± 15% ama ± 0.6mm hadba kan weyn d | |||
| T 2 | ± 12.5% ama ± 0.4mm hadba kan weyn e | |||
| Fiiro gaar ah a: Tuubooyinka waa in lagu dalbo iyadoo cabbirkoodu dhan yahay. Xaaladda leexsanaanta bannaanka ee dhexroorka ± 0.6% lagu dabaqay tuubada wuxuu ku dhammaanayaa dherer qiyaastii ah. 100mm Xusuusin b: Waxay khusaysaa tuubooyinka dhumucdiisuna waxay tahay T≤0.01 D iyo T≤4mm. Xusuusin c: Waxay khusaysaa tuubooyinka dhumucdiisuna tahay gidaarka T≤0.05D Xusuusin d : Waxay qusaysaa tuubooyinka dhumucdiisuna tahay gidaarka T: 0.05D ＜T≤0.09D Xusuusin e : Waxay khusaysaa tuubooyinka dhumucda gidaarka T：0.09D | ||||
Dulqaadka dhererka saxda ah
| Dhererka L | Dulqaadka dhererka saxda ah |
| L ≤ 6000 | + 5 0 |
| 6000 ＜ L ≤ 12000 | + 10 0 |
| L ＞ 12000 | + heshiis 0 |
Tijaabooyinka 316H Pipe
1. Falanqaynta Kiimikada (ASTM E345)
2.Mechanical Properties (Kiisaska: ASTM E8)
3.Baaritaan aan burbursanayn
3.1: 100% Baaritaanka Hydrostatic
3.2: Sida ku cad ASTM A450/A450M
Xarumaha waaweyn ee wax-soo-saarka ee tuubbooyinka birta-la'aanta ah iyo qalabyada
| Maya | Magaca Qalabka |
| 1 | Mashiinka Duubka Qabow (φ12 ~ 711mm) |
| 2 | Mashiinka Sawirka Qabow Cadaadiska Haydarooliga (60T, 100T, 150T, 250T, 500T, 1000T) |
| 3 | Mashiinka Sawirka Silsiladda Qabow (5T, 10T, 20T, 65T) |
| 4 | Mashiinka diirka (φ60 ~ 160mm) |
| 5 | Daloolinta Mill (φ60 ~ 820mm) |
| 6 | Foornada Dabiiciga ah ee Gaaska Dabiiciga ah ≤1250℃ (±10℃) |
| 7 | Dabeecada Xalinta Gaaska Foornada ≤1300℃ (±10℃) |
| 8 | Foornada Duubista Socodka |
| 9 | Foornada Annealing dhalaalaya (OD6-60mm; WT0.4-5mm) |
| 10 | Nooca Afar-tiir ee Mashiinka Saxaafadda Hydraulic (φ108 ~ 1219mm) |
| 11 | Mashiinka Toosinta Todobada-Roller(≤φ711mm) |
| 12 | Mashiinka Toosinta Toosan (φ30 ~ 120mm) |
| 13 | Qubayska Caaga ah ee lagu qaado |
| 14 | Lathe & Horizontal Band Sawsφ1000mm ugu badnaan |
| 15 | Mashiinka Qallooca ee CNC(MPa32000KN Dhererka Laabashada 6000mm & MPa24000KN Dhererka Laabashada 13500mm) |
| 16 | Mashiinka alxanka (φ16*0.5~762*26mm) |
| 17 | Mashiinka alxanka Tooska ah ee Dhuumaha Gudaha 7M (OD: 355-1500MM; L: 1500-12000MM) |
| 18 | Mashiinka Qarxinta Tooska ah ee Gidaarka Dhuumaha (8T/D) |
| 19 | CNC Lathe |
| 20 | NC Olol/Mashiinka Goynta Plasma |
| 21 | Laabi Riixitaanka Qabow |
| 22 | Saddex Qabow Mashiinka Samaynta |
| 23 | Mashiinka Riixitaanka Dhuumaha Qabow |
| 24 | Mashiinka Qorshaynta Edge |
| 25 | Tuubbada Korontada Makiinada |
| 26 | Mashiinka Beveling Tube / Mashiinka Beveling |
| 27 | Mashiinka qashin-qubka |
| 28 | Mashiinka Goynta miinshaarka Wareega ee Birta |
| 29 | CNC Plasma Machine Goynta |
| 30 | Mashiinka Goynta Plasma Hawada |
| 31 | Mishiinka duubista |
| 32 | P+T Nidaamka Saxanka Tooska ah |
Waqtiga boostada: Abriil-16-2024