Strip Steel-Sirt

Xarigga birta aan-dhalatada lahayn waa birta aan la duubin ee qabow ka hooseysa 5.00 mm dhumucdiisuna waxay ka hooseysaa 610mm.

Noocyada kala duwan ee dhammayn ee lagu soo iibsan karo xariijimaha aan dhalada lahayn ee qabow-duuban waa No.1 Dhammays ah, No.2 Dhammays ah, Dhammayn BA, Dhammays TR ah, iyo Dhammays tiran.

Noocyada cidhifyada ee laga heli karo xariijimaha aan nadiifka ahayn waa cidhifka No.1, cidhifka No.3, iyo cidhifka No.5. Xariijimahaan waxaa lagu soo aruuriyay 200 oo taxane, 300 oo taxane ah, 400 oo taxane ah.

Badeecadayada iibka ugu badan waxaa ka mid ah 201 xargo bir ah, 202 xargo bir ah, 301 xargo bir ah, 304 iyo 304L, 316 iyo 316L, 409, 410, iyo 430 birta birta ah.

Dhumucdoodu waxay u dhaxaysaa 0.02mm ilaa 6.0mm. Dulqaadka ugu yar ee dhumucdiisu waa 0.005mm kaliya. Biraha, waxaan nahay kuwo dhab ah.

 

Tilmaamid
Cabbirka	Dhumucda: 0.02 ~ 6.0mm; Ballaca: 0 ~ 610mm
Farsamooyinka	Qabow duuban, Kulul duuban
Dusha sare	2B, BA, 8K, 6K, Muraayad dhammaatay, No.1, No.2, No.3, No.4, Khadka timaha oo leh PVC
Heerka	ASTM A240, ASTM A480, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, DIN 17441

 

U dhame Gariiradda Jeexitaanka Aan Lahayn
No.1 Dhammays:Qabow-duuban ilaa dhumuc gaar ah, la tirtiray, oo la jarjaray.
No.2 Dhammays:La mid ah No.1 Dhammays, oo ay ku xigto kaadhka-duubka qabow ee u dambeeya, guud ahaan duubabka aadka loo silcay.
Dhammaadka Niyad-jabka leh:Dhammays qabow-rogid ah oo dhalaalaysa oo ay haysay ciribtirka u dambeeya ee foornada jawiga la xakameeyey.
Dhammaadka TR:Qabow-shaqeeyay si loo helo hanti cayiman.
Dhamaystir La Sifeeyay:Waxa kale oo lagu heli karaa dhammayn la tolay sida No.3 iyo No.4.

Fiiro gaar ah:
No.1- Muuqashada dhammayntu way kala duwan tahay dhammaystirka matte-cawlan ee caajiska ah ilaa dusha si cadaalad ah u milicsanaya, iyadoo ku xidhan inta badan halabuurka. Dhamaystirkan waxaa loo isticmaalaa qaybo si xun loo sawiray ama la sameeyay, iyo sidoo kale codsiyada halka N.2 Dhamays-dhal ah aan loo baahnayn, sida qaybaha u adkaysiga kulaylka.
No.2- Dhammaystirkani wuxuu leeyahay dusha sare oo jilicsan oo dhalaalaya, muuqaalka kaas oo ku kala duwan yahay halabuurka. Tani waa dhammays ujeedo guud, oo si weyn loogu isticmaalo guriga iyo jar-jarrada baabuurta, alaabta miiska, maacuunta, saxarada, iwm.
No.3- Dhamays taxan oo toosan oo laga yaabo in ay soo saarto si farsamaysan oo polishing ama duubid. Celcelis ahaan qallafsanaanta dusha sare waxay guud ahaan noqon kartaa ilaa 40 micro-inji. Hawlwadeenka xirfadda leh ayaa guud ahaan isku dari kara dhammaystirkan. Cabbirrada qallafsanaanta dusha sare waxay ku kala duwan yihiin qalabyada, shaybaadhka, iyo hawl-wadeennada. Waxaa laga yaabaa in ay isbarbar-dhigaan cabbirrada qallafsanaanta dusha sare ee dhammayntooda No.3 iyo No.4.
No.4—dhammaystir toosan oo muuqaal ah oo laga yaabo in ay soo saarto si farsamaysan oo polishing ama duubid. Celcelis ahaan qallafsanaanta dusha sare waxay guud ahaan noqon kartaa ilaa 25 micro-inji. Hawlwadeenka xirfadda leh ayaa guud ahaan isku dari kara dhammaystirkan. Cabbirrada qallafsanaanta dusha sare waxay ku kala duwan yihiin qalabyada, shaybaadhka, iyo hawl-wadeennada. Waxaa laga yaabaa in ay isbarbar-dhigaan cabbirrada qallafsanaanta dusha sare ee dhammayntooda No.3 iyo No.4.
Dhammaystir dhalaaleed-Dhamays siman, dhalaal ah, oo milicsi leh sida caadiga ah waxa soo saara is-rog-rogid qabow oo ay ku xigto jawiga ilaalinta si looga hortago oksaydhka iyo qolofka marka la suulinayo.
Dhammaadka TR- Dhammaadka ka dhalanaya duubista qabow ee badeeco la jeexjeexay ama la jarjaray ama dhalaalaysa si loo helo sifooyin farsamo oo ka sarreeya kan xaaladda la daboolay. Muuqashada way kala duwanaan doontaa iyadoo ku xiran bilowga bilowga, qadarka shaqada qabow, iyo daawaha.

Cidhifyada loogu talagalay Gariiradda Jeexitaanka Aan Lahayn
No.1 gees:gees duuban, ama wareegsan ama labajibbaaran sida lagu cayimay.
No.3 gees:Cidhif ay soo saartay dildillaac.
No.5 gees:Qiyaastii gees labajibbaaran oo ay soo saartay rogid ama xerayn jeexid ka dib.

Dulqaadyada Dhumucda

 

Lagu cayimayDhumucda, mm	Dulqaadyada Dhumucda, ee Dhumucda iyo Balaadhka La Siiyey, Ka Badan iyo Hoos, mm.
	Ballaca (w), mm.
	W≤152mm	152mmW≤305mm	305mmW≤610mm
	Dulqaadashada DhumucdaA
0.05 ilaa 0.13, marka laga reebo.	10%	10%	10%
0.13 ilaa 0.25, oo ay ku jiraan.	0.015	0.020	0.025
0.25 ilaa 0.30, oo ay ku jiraan.	0.025	0.025	0.025
0.30 ilaa 0.40, oo ay ku jiraan.	0.025	0.04	0.04
0.40 ilaa 0.50, oo ay ku jiraan.	0.025	0.04	0.04
0.50 ilaa 0.74, oo ay ku jiraan.	0.04	0.04	0.050
0.74 ilaa 0.89, oo ay ku jiraan.	0.04	0.050	0.050
0.89 ilaa 1.27, oo ay ku jiraan.	0.060	0.070	0.070
1.27 ilaa 1.75, oo ay ku jiraan.	0.070	0.070	0.070
1.75 ilaa 2.54, oo ay ku jiraan.	0.070	0.070	0.10
2.54 ilaa 2.98, oo ay ku jiraan.	0.10	0.10	0.12
2.98 ilaa 4.09, oo ay ku jiraan.	0.12	0.12	0.12
4.09 ilaa 4.76, oo ay ku jiraan.	0.12	0.12	0.15

 

Xusuusin A: Dulqaadyada dhumucda la'aanta ayaa la siiyay I mm ilaa si kale loo tilmaamo.

Dulqaadyada Balaadhka

 

Dhumucda la cayimay, mm	Dulqaadka Balaadhka, Kor iyo Hoos, ee Dhumucda iyo Balaadhka La Siiyey, mm
	W≤40mm	152mmW≤305mm	150mmW≤305mm	152mmW≤305mm
0.25	0.085	0.10	0.125	0.50
0.50	0.125	0.125	0.25	0.50
1.00	0.125	0.125	0.25	0.50
1.50	0.125	0.15	0.25	0.50
2.50	…	0.25	0.40	0.50
3.00	…	0.25	0.40	0.60
4.00	…	0.40	0.40	0.60
4.99	…	0.80	0.80	0.80