Incoloy 800H, ua lauiloa foi o le "Alloy 800H", ua filifilia o UNS N08810 poʻo DIN W.Nr. 1.4958. E toetoe lava tutusa le tuufaatasiga o vailaʻau ma le Alloy 800 sei vagana ai e manaʻomia se faʻaopoopoga maualuga atu o le kaponi e mafua ai le faʻaleleia o meatotino maualuga. Pe a faatusatusa iIncoloy 800, e sili atu ona fetolofi ma fa'alavelave fa'alavelave i le 1100°F [592°C] i le 1800°F [980°C]. A'o fa'amauina le Incoloy 800 i le pe tusa o le 1800°F [980°C], e tatau ona fa'amauina le Incoloy 800H pe a ma le 2100°F [1150°C]. E le gata i lea, o le Alloy 800H e sili atu le mamafa o le saito e tusa ai ma le ASTM 5.
1. Tulaga Fa'ainumera Manaomia
| Le Tulaga Fa'ama'i ole Incoloy 800, % | |
|---|---|
| Nikeli | 30.0-35.0 |
| Cromium | 19.0-23.0 |
| Uamea | ≥39.5 |
| kaponi | 0.05-0.10 |
| Alumini | 0.15-0.60 |
| Titanium | 0.15-0.60 |
| Manganese | ≤1.50 |
| Sulfur | ≤0.015 |
| Silicon | ≤1.00 |
| Kopa | ≤0.75 |
| Al+Ti | 0.30-1.20 |
2. Meatotino Fa'ainisinia o Incoloy 800H
ASTM B163 UNS N08810, Incoloy 800H paipa fa'alelei, 1-1/4″ x 0.083″(WT) x 16.6′(L).
| Malosi Tetele, min. | Malosi, min. | Faaumiumi, min. | Malosi, min. | ||
|---|---|---|---|---|---|
| Mpa | ksi | Mpa | ksi | % | HB |
| 600 | 87 | 295 | 43 | 44 | 138 |
3. Meatotino Faaletino o Incoloy 800H
| Malosi | Va'aiga Li'u | Avela faapitoa | Tete'e eletise | ||
|---|---|---|---|---|---|
| g/cm3 | °C | °F | J/kg. k | Btu/lb.°F | µΩ·m |
| 7.94 | 1357-1385 | 2475-2525 | 460 | 0.110 | 989 |
4. Fua Fa'atauga ma Tulaga Fa'atonu ole Incoloy 800H
| Oloa Mai | Tulaga |
|---|---|
| Rod ma Pa | ASTM B408, EN 10095 |
| Papatusi, Pepa & Fa'ailoga | ASTM A240, A480, ASTM B409, B906 |
| Paipa & Fa'apa'u | ASTM B829, B407 |
| Paipa & Fa'apa'u | ASTM B514, B515, B751, B775 |
| Mea fa'apipi'i uelo | ASTM B366 |
| Fa'ailogaina | ASTM B564, DIN 17460 |
Taimi meli: Oke-23-2020