-
ALLOY 925, UNS N09925 Chemical composition % Ni Fe Cr C Mn Si P S Mo Cu Ti Al Nb min 42.0 22.0 19.5 2.5 1.5 1.9 0.10 max 46.0 22.5 0.030 1.00 0.50 0.030 0.030 3.5 3.0 2.4 0.50 0.50 Physical properties Density 8.08 g/cm3 Melting range 1311-1366℃ Features:Alloy 925 is a p...Read more »
-
ALLOY C-4, UNS N06455 Alloy C-4 Chemical compostion: Alloy % Ni Cr Mo Fe C Mn Si Co S P Ti C-4 Min. 65 14 14 Max. 18 17 3.0 0.01 1.0 0.08 2.0 0.010 0.025 0.70 Alloy C-4 Physical properties: Density 8.64 g/cm3 Melting point 1350-1400 ℃ Alloy C-4 Alloy ...Read more »
-
ALLOY B-3, UNS N10675 Alloy B-3 alloy is an additional member of the nickel-molybdenum family of alloys with excellent resistance to hydrochloric acid at all concentrations and temperatures. It also withstands sulfuric, acetic, formic and phosphoric acids, and other nonoxidizing media. B-3 a...Read more »
-
ALLOY 600, UNSN06600 Alloy 600 （UNS N06600） Summary A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemic...Read more »
-
ALLOY C-276,UNSN10276,2.4819 Alloy % Ni Cr Mo Fe W Co C Mn Si V P S C Min. balance 14.5 15 4 3 Max. 16.5 17 7 4.5 2.5 0.08 1 1 0.35 0.04 0.03 C276 Min. balance 14.5 15 4 3 Max. 16.5 17 7 4.5 2.5 0.01 1 0.08 0.35 0.04 0.03 Alloy C-276 Physical properties Densit...Read more »
-
254MO,S31254,1.4547 Alloy % Ni Cr Mo Cu N C Mn Si P S 254SMO Min. 17.5 19.5 6 0.5 0.18 Max. 18.5 20.5 6.5 1 0.22 0.02 1 0.8 0.03 0.01 254SMO Physical properties : Density 8.0 g/cm3 Melting point 1320-1390 ℃ 254SMO minimum mechanical properties in the room temperature: ...Read more »
-
ALLOY B-2, UNS N10665 Alloy B-2 UNS N10665 Summary A corrosion-resistant solid-solution nickel-molybdenum alloy, Alloy B-2 exhibits excellent corrosion resistance in aggressive reducing media such as hydrochloric acid in a wide range of temperatures and concentrations, as well as in mediu...Read more »
-
ALLOY 625, UNSN06625 Alloy 625 （UNS N06625） Summary A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy’s matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a w...Read more »
-
TUBOS Padrão Schedule com ou sem costura, quadrados, retangulares e padrão OD com costura redondos. AISI TP-304 TP-316 TP-309 TP-321 TP-304L TP-316L TP-309S TP-304H TP-316TI TP-310 TP-347 TP-317L TP-310S TP-904L ASTM A-249 A-270 A-358 A-554 A-269 A-312 A-409 A-778 Read more »
-
CHAPAS As chapas são obtidas pelo corte mecânico das bobinas de aço inox laminadas a quente ou a frio, em equipamentos de corte transversal. COMPRIMENTOS Até 18.000 mm ESPESSURAS Laminados a quente – 2,60 mm a 8,00 mm Laminados a frio – 0,40 mm a 6,00 mm LARGURAS 1.000 mm a 2.000 mm (...Read more »
-
SS Tubes – There is a huge demand for tubes used for decoration purposes such as door handles, railings, balustrades, etc. Grade: 201, 304(L), 316(L)Material: AUSTENITIC – Grades 304 / 304L, 316 / 316L FERRITIC STAINLESS STEEL Grades 409 / 409L, 430 / 430L, 434, 442 MARTENSITIC STAINL...Read more »
-
ALUMINIUM Grade Condition Shape Size range in mm Density Al 6061 T6/T651/T6511 Round Bars OD 20mm – OD 500mm 2.700 Flat Bars 15-100mm Thickness x 30mm-350mm width PLATES/SHEET 10mm – 80mm thickness width 1250mm – 4000mm Al 7075 T6/T651/T6511 Round Bar OD 20mm – OD 250mm...Read more »