Nickel Inconel/Incoloy/Nimonic/Monel/Hastelloy Alloy Steel Round Bar (600 601 617 625 686 690 718 X750 800 800HT 825 925 200 201 400 K500)
Whakaahuatanga Poto:
IncoloyKohanga 926/Inconel926
Incoloy Alloy926paipa/Incoloy 926Paipa
Incoloy 926:he kowiri tira austenitic he rite te hanganga matū me te 904L koranu, ko te hauota ko te 0.2%, ko te molybdenum he 6.5%. Molybdenum me te hauota ihirangi tino nui haere te ātete o te rua me te kawa te waikura i roto i te halide media.Meantime, nickel me te hauota kore anake whakarite te pūmautanga o metallographical, engari ano whakaiti wehe au intergranular i roto i te tukanga waiariki tukanga fehokotaki'anga pai atu i te ihirangi hauota o nickel alloy.
Incoloy 926 Ingoa Tauhokohoko: Alloy926;UNS N08926;W.Nr.1.4529;
Incoloy Alloy 926 Hanganga matū:
| Kohanga | % | Ni | Cr | Fe | C | Mn | Si | Cu | Mo | N | Ti | P | S |
| 926 | Min. | 24 | 19 | Taurite | 0.5 | 6.0 | 0.15 | 0.6 | |||||
| Max. | 26 | 21 | 0.02 | 2 | 0.5 | 1.5 | 7.0 | 0.25 | 1.2 | 0.03 | 0.01 |
Incoloy Alloy 926 Āhuatanga ā-tinana:
| Kiato | 8.1 g/cm3 |
| Te rewa | 1320-1390 ℃ |
Incoloy Alloy 926 Nga taonga Miihini iti i roto i te pāmahana rūma:
| Te ahua konumohe | Te kaha tensile Rm N/mm2 | Te kaha tuku RP0.2 N/mm2 | Whakaroa A5 % |
| 926 | 650 | 295 | 35 |
Incoloy Alloy 926 Kōnae Taupānga:
- Ko te punaha ahi, te punaha horoi wai, te miihini moana me te punaha whakangao paipa waipēhi
- Ko te paipa, te hononga, nga punaha hau i roto i te hanga hau waikawa
- Ko te whakaea, te whakawhiti wera, te tātari, te whakaranu, me etahi atu i roto i te hanga phosphate
- Te whakamaarama o nga tipu hiko me te punaha paipa ki te whakamahi i te wai parakaingo hei whakamatao i te wai
- Te whakamahi o te whakakorikori waro waikawa whakangao pärönaki maota
- Ko te hanga o te penupenu cellulose, Pae Orohia i roto i nga puna hinu orrosive
- Pūnaha ngongo i roto i te miihini moana, Nga waahanga o te punaha whakaheke hau rewharewha
- Pūnaha whāwhā waikawa pūngāwhā me te wehenga, te kukū tote kirikiri me te whakaeto
- Te kawe i nga ipu matū ha'iriiri, Mahere whakamuri osmosis desalination
Koeke Rauemi
| Rauemi | ASTM A240 Paerewa | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410 9S |
| ASTM A480 Paerewa | 302. 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S3102, S3102, S3102 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32204, S32204 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Paerewa | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Paerewa | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS301S, SUS309S, SUS301S, SUS SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUSL836J2, SUS317J1, SUS317J1 SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS4364, SUS4364 SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Whakatakotoranga Hua
| Whakaoti | Te matotoru | Nga ahuatanga | Nga tono |
| Nama 1 | 3.0mm~50.0mm | Kua oti i te wera-roke, te annealing me te tiki, e tohuhia ana e te mata î ma | Nga taputapu ahumahi matū, Taeke Ahumahi |
| Nama 2B | 0.3mm~6.0mm | Ka oti i te maimoatanga wera, te tiki i muri i te hurihanga matao, ka whai i te raina paahi kiri kia marama ake, kia maeneene te mata | Whakamahinga Whanui Nga Taonga Hauora, Te Ripanga |
| Nama BA (Kanaana Ane) | 0.5mm~2.0mm | Te maimoatanga wera kanapa i muri i te hurihuri makariri | He taputapu kihini, he taputapu kihini, he kaupapa hangahanga |
| Nama 4 | 0.4mm~3.0mm | Te whakakoi me te No. 150 ki te No.180 mesh abrasives. Ko nga otinga tino rongonui | Te miraka me te mahi kai, Nga Taputapu o te Hohipera, Tapu Patu |
| Nama 8 | 0.5mm~2.0mm | He mata whakaata rite-whakaata ma te whakakoi me nga abrasive pai ake i te 800 mata | Te whakaata, te whakaata, te whakapaipai o roto-waho mo te hanga |
| HL(Raina Huruhuru) | 0.4mm~3.0mm | Kua oti i te whakakoi raina tonu | Nga kaupapa hoahoanga, nga kaitarai, nga waka taonga kihini |
Hanganga matū
| Kōeke | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Ētahi atu | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Tatoutakai nga hua kowiri tira ki te pepa anti-waikura me nga mowhiti maitai kia kore ai e pakaru.
Ka tohuhia nga tapanga tautuhi i runga i nga tohu paerewa me nga tohutohu a nga kaihoko.
Kei te waatea nga kohinga motuhake mo te hiahia a te kaihoko.
Kowiri tira Kowiri Mokete
Pepa Kowiri tira / Paareti Kowiri tira
Mōkī Tāhei Kowiri tira
Mōkī Tukunga
Ko ta matou kamupene kei Wuxi, e kohikohi ana i te taone o te ahumahi kowiri tira i Haina.
He mea motuhake matou ki nga kowiri tira, nga pepa me te pereti, te paipa kowiri tira me nga taputapu, nga ngongo kowiri tira, me nga hua konumohe me nga hua parahi.
Ko o maatau hua kua tino whakanuihia e o taatau kiritaki mai i Uropi, Amerika, te Middle East, Awherika me te Tonga o Ahia. Ka whakaekea e matou nga hua whakataetae me te ratonga matawhānui ki nga kaihoko.
Kowiri tira Kowiri tira: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 4, 4, 4 430, 430F, 440, 440c,
Kōeke Alloy :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Nickel Alloys Motuhake
I roto i te ahua o : Pae Porowhita, Pae Tapawha, Pae Hexagonal, Pae Papatahi, Koki, Hongere, Profile, Waea, Waea Waea, Rau, Pereti, Paipa Kore, ERW Pipe, Flanges, Fittings, etc.
Q1: He aha te kowiri?
A: Ko te tikanga o te kowiri karekau he tohu i runga i te mata rino, he momo rino ranei e kore e pakaru i te hau, i te wai ranei, kaore e rereke te tae, kore kohakore, he atete ki te poke, te waikura, te kino o nga matū.
Q2: Ko te tikanga ko te kore he waikura?
A: Kao, he kowiri te tikanga ehara i te mea ngawari ki te poke, ki te waikura ranei, he kaha ki te aukati i te poke, te waikura me te waikura.
Q3: Kei te tuku koe i nga pepa kowiri tira?
A: Ae, ka tukuna e matou nga momo momo pepa kowiri tira, me te matotoru o te 0.3-3.0mm. a i roto i nga otinga rereke.
Q4: Ka whakaae koe ki te tapahi ki te ratonga roa?
A: Ko te tikanga, ko te pai o te kaihoko ko ta matou kaupapa matua.
Q5: Mena he iti taku ota, ka whakaae koe ki te ota iti?
A: Kaore he raruraru, ko to awangawanga ko to maatau awangawanga, ka whakaaetia nga waahanga iti.
Q6: Me pehea e taea ai e koe te whakamana i to kounga hua?
A: Tuatahi, mai i te timatanga, kua whakatinanahia e matou he wairua ki o ratou hinengaro, ara ko te kounga te oranga, ka whai a matou kaimahi ngaio me nga kaimahi i ia hikoinga kia pai te kii o nga taonga ka tukuna ki waho.
Q7: Ka kohia e koe nga hua?
A: Ko nga tangata ngaio e mahi ana i nga mahi whakakakahu ngaio, he rereke nga momo tarapēke ki nga kaihoko, ohaoha, pai ake ranei.
Q8: He aha e hiahia ana koe ki te mohio mai i te kaihoko i mua i te whakahua tika?
A: Mo te korero tika, me mohio tatou ki te karaehe, te matotoru, te rahi, te mutunga o te mata, te tae me te nui o to ota, me te waahi hoki o nga taonga. Ka nui ake nga korero mo nga hua kua whakaritea, penei i te tuhi, te whakatakotoranga me te mahere. Na ka whakaekea e matou he whakataetae whakataetae me nga korero o runga ake nei.
Q9: He aha te ahua o te wa utu ka whakaaetia e koe?
A: Ka whakaaetia e matou te T / T, te Uniana o te Hauauru, L / C.
Q10: Mena he ota iti tenei, ka tukuna e koe nga taonga ki to maatau kaihoko?
A: Ae, i whanau mai matou ki te whakaoti rapanga o o taatau kaihoko, ka whiwhi maatau i nga taonga ki te whare putunga o to kaihoko ka tukuna atu nga pikitia ki a koe.
Q11: Ka hanga noa koe i te pepa papatahi? E hiahia ana ahau ki te hanga tito mo taku kaupapa hou.
A: Kare, ko te nuinga o taatau te whakaputa i te maimoatanga mata papatahi kowiri tira, i te wa ano, ka hangaia e matou he hua whakarewa kua oti te whakarite kia rite ki te tuhi a te kaihoko me te mahere, ma to maatau tohunga e tiaki te toenga.
Q12: E hia nga whenua i kaweake e koe?
A: Kaweake ki neke atu i te 50 whenua te nuinga i Amerika, Russia, UK, Kuwait, Ihipa, Iran,
Turkey, Jordan, etc.
Q13: Me pehea e taea ai e au etahi tauira?
A: Nga tauira iti kei roto i te toa ka taea te whakarato i nga tauira mo te kore utu. Kei te waatea a Catalgue, te nuinga
tauira kei a matou nga tauira kua rite i roto i nga taonga. Ko nga tauira kua whakaritea mo te 5-7days.
Q14: He aha te tuku?
A: Ko te wa tuku o te ota tauira ko 5- 7 ra. Ko nga ota ipu he 15-20 nga ra.
Q15: He aha te tono mo o Hua?
A: 1.Elevator tatau/cabin ranei me te escalator taha-taiepa.
2. Te whakakikorua i te pakitara o roto, o waho ranei o te rūma hui/ wharekai.
3. Facade i te wa e whakakikoruatia ana tetahi mea, penei i nga pou o te tomokanga.
4. He tuanui i te hokomaha. 5. Te tuhi whakapaipai i etahi waahi whakangahau.
Q16: Kia pehea te roa ka taea e koe te Whakaae mo tenei Hua / Mutu?
A: Taurangi tae mo te neke atu i te 10 tau. Ka taea e te tiwhikete kounga rauemi taketake
kia whakaratohia.
