Ko Haina te kaiwhakarato matua o nga Porowhita Kōpae Aluminium me te Porowhita Rau Aluminium
Whakaahuatanga Poto:
Ko Haina te kaiwhakarato matua o nga Porowhita Kōpae Aluminium me te Porowhita Rau Aluminium
Ko Haina te kaiwhakarato matua o nga Porowhita Kōpae Aluminium me te Porowhita Rau Aluminium
Ko te Aluminum Alloy 5052 he kaha reo, Ko te konupora Aluminium me te pai o te aukati ki te pirau o te hau. Ka taea e ia te kaha ki te kaha teitei ma te mahi makariri me te kaha o te kaha paiherea ki etahi atu Aluminum Alloys. Koia te koranu pai mo nga mahi pepa kua mahia mo nga whakamahinga o waho na te pai o te whakapiko me te aukati waikura
Nga tono o Aluminum Alloy 5052
Ko te konumohe konumohe e whakamahia nuitia ana mo te hanga taputapu, poti iti, tohu tohu, Whakapaipai, Nga waahanga hoahoanga me nga whaa, nga kaapena me nga waahi.
Ko nga rahi e mau ana mo te Aluminum Alloy 5052
Ko nga pepa AA 5052 e waatea ana ki a maatau i ahu mai i nga mira rongonui mai i Uropi me Inia. Ka whakaratohia e matou he tiwhikete whakamatautau mira e rite ana ki nga paerewa EN me o maatau tuku katoa mena ka tono.
Tena tirohia te ripanga i raro nei mo te raarangi o nga rahi kei roto i a maatau taonga. I tua atu i tenei ripanga, kia mahara ko etahi atu rahinga kore paerewa e waatea ana i runga i te tono. Tena koa whakapiri mai ki a maatau me to patai.
| Matotoru Rau Aluminium (mm) | Rahi 1219mm x 2438mm (4'x 8') |
|---|---|
| 1.0 | ✓ |
| 1.5 | ✓ |
| 2.0 | ✓ |
| 3.0 | ✓ |
| 4.0 | ✓ |
Ētahi atu Alloys Aluminium
Ka whakaekea e matou he momo whakarewa pepa Aluminium mania. Ko nga koranu rereke e tuku ana i te whānuitanga o te weldability, machinability me te ātete ki te waikura.
| Kohanga | Waahanga matū %≤ | |||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | etahi atu | Al | ||
| takakau | katoa | |||||||||||
| 5052 | 0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.15-0.35 | 0.10 | 0.05 | 0.15 | toenga | ||
| 5005 | 0.30 | 0.70 | 0.20 | 0.20 | 0.5-1.1 | 0.10 | 0.25 | 0.05 | 0.15 | toenga | ||
| 5754 | 0.40 | 0.40 | 0.10 | 0.50 | 2.6-3.6 | 0.30 | 0.20 | 0.05 | 0.15 | toenga | ||
| 5083 | 0.40 | 0.40 | 0.10 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | 0.25 | 0.05 | 0.15 | toenga | ||
| 5086 | 0.40 | 0.50 | 0.10 | 0.20-0.7 | 3.5-4.5 | 0.05-0.25 | 0.25 | 0.15 | 0.05 | 0.15 | toenga | |
| 5154 | 0.50 | 0.40 | 0.10 | 0.10 | 3.1-3.9 | 0.15-0.3 | 0.20 | 0.20 | 0.05 | 0.15 | toenga | |
| 5050 | 0.40 | 0.70 | 0.20 | 0.10 | 1.1-1.8 | 0.10 | 0.25 | 0.05 | 0.15 | toenga | ||
| 5454 | 0.25 | 0.40 | 0.10 | 0.50-1.0 | 2.4-3.0 | 0.05-0.20 | 0.25 | 0.20 | 0.05 | 0.15 | toenga | |
| 5456 | 0.25 | 0.40 | 0.10 | 0.50-1.0 | 407-5.5 | 0.05-0.20 | 0.25 | 0.20 | 0.05 | 0.15 | toenga | |
| Wehewehenga | Whakaahuatanga | Taupānga | Āhuahira |
| 1000 RANGATIRA | 1050 1060 1070 1100 1235representative raupapa konumohe paraharaha te mohiotia hoki rite konumohe parakore, i roto i te raupapa i roto i te raupapa 1xxx no ki te rahinga alumina katoa o te maha mōrahi o te raupapa. Ka taea e te parakore te 99.00% ki runga ake. | Te taputapu, te whakapaipai, te pereti whakaata, te pereti ta, te pereti wera, te tunu kai | He ngawari ki te tukatuka me te weld, te aukati ki te waikura, teitei, te kawe hiko me te wera, iti te kaha |
| 3000 RANGATIRA | 3xxx raupapa konumohe tohu 3003 3004,3005, 3 A21 matua. A ka taea te karanga i roto i te 3xxx raupapa konumohe antirust konumohe tukanga production atu tino. Ko te pereti konumohe raupapa 3xxx na te manganese hei waahanga matua. Ihirangi i 1.0-1.5 i waenganui. He pai ake te mahi a te waikura. tono tikanga i roto i te whāhauhau, te pouaka whakamātao, pērā i te motokā i roto i te taiao haukū | Utensil(F/P, roto o te tunu raihi), te ipu konumohe, nga taonga mo roto me waho o te whare, taputapu matū, Waea Pukoro | 20% te kaha teitei ake i te raupapa 1100, he ngawari te paihere me te parai, he pai te antirust, te kaha Kore-wera te rongoa |
| 5000 RANGATIRA | 5xxx māngai raupapa 5052 5005 5083,5754. Ko te raupapa 5000 konumohe konumohe konumohe no roto i te raupapa e whakamahia nuitia ana, ko nga mea matua mo te konupora, me te konupora i roto i te nui i waenga i te 3-5%. A ka taea te kiia konumohe konupora konumohe. Ko nga ahuatanga matua mo te iti kiato, te kaha tensile teitei, te tere elongation he tiketike. I roto i te rohe kotahi i raro i te taimaha o te konupora konupora konumohe iti iho i etahi atu raupapa. | Ko nga taputapu whakamahana a te papa kaipuke, he taonga mo roto me waho o te whare, Nga waahanga o nga taputapu Hiko.Wahanga Motika | He pai te aukati waikura me te kaha ki te wea tahi me te ngawari ki te tukatuka me te weld me te pakeke pai & parewera Ka taea te anodized mo te whakanui ake i te waikura |
| 6000 RANGATIRA | Ko nga raupapa 6xxx e tohu ana i te 6061 te nuinga kei roto i te konupora me te silicon o nga mea e rua, na te mea e aro ana ki te raupapa 4000 me nga painga o te raupapa 5000 6061 he maimoatanga makariri konumohe whakaraerae hua, tono ki te whawhai ki te waikura, oxidizing tono tono. | Nga taputapu IT me te whare, Ko nga mea hangai, nga taputapu motuka, te raina aunoa, te miihini me te tipu etc | He ngawari ki te tukatuka, he pai te aukati i te waikura, he uaua teitei me te tukatuka me te kore he whakakorikori i muri i te wera-whakaritea, te maimoatanga mata pai ake. |
| 7000 RANGATIRA | Ko te konumohe konumohe 7000 tetahi atu konumohe noa, he momo whanui. He konutea me te konupora. Ko te kaha pai i roto i te koranu konumohe noa ko te 7075 koranu, engari e kore e taea te paiherea, a he tino ngoikore te aukati o te waikura, he maha nga waahanga hangahanga me te tapahi CNC he 7075 koranu. | Te ahumahi aerospace me nga taputapu kaha teitei | Ko te raupapa 7000 he kaha nui ki te tukatuka me te koranu motuhake |
| Kohanga | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ētahi atu | Al | ||
| Takitahi | Tapeke | ||||||||||||
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.6 |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.5 |
| 1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | _ | 0.1 | _ | _ | 0.05 | 0.15 | 99 | |
| 1200 | Si+Fe:1.00 | 0.05 | 0.05 | _ | _ | 0.1 | _ | 0.05 | 0.05 | 0.15 | 99 | ||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | _ | 0.1 | _ | 0.05 | 0.15 | R | |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | _ | _ | 0.25 | _ | 0.05 | 0.15 | R | |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.20~0.6 | 0.1 | _ | 0.25 | 0.1 | 0.05 | 0.15 | R | |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | _ | 0.4 | 0.1 | 0.05 | 0.15 | R | |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | _ | 0.25 | _ | _ | 0.05 | 0.15 | R |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | _ | 0.1 | _ | _ | 0.05 | 0.15 | R |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | _ | 0.25 | _ | 0.15 | 0.05 | 0.15 | R |
| 5086 | 0.4 | 0.5 | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | _ | 0.25 | _ | 0.15 | 0.05 | 0.15 | R |
Koeke Rauemi
| Rauemi | ASTM A240 Paerewa | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410 9S |
| ASTM A480 Paerewa | 302. 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S3102, S3102, S3102 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32204, S32204 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Paerewa | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Paerewa | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS301S, SUS309S, SUS301S, SUS SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUSL836J2, SUS317J1, SUS317J1 SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS4364, SUS4364 SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Whakatakotoranga Hua
| Whakaoti | Mātotoru | Nga ahuatanga | Nga tono |
| Nama 1 | 3.0mm~50.0mm | Kua oti i te wera-roke, te annealing me te tiki, e tohuhia ana e te mata î ma | Nga taputapu ahumahi matū, Taeke Ahumahi |
| Nama 2B | 0.3mm~6.0mm | Ka oti i te maimoatanga wera, te tiki i muri i te hurihanga matao, ka whai i te raina paahi kiri kia marama ake, kia maeneene te mata | Whakamahinga Whanui Nga Taonga Hauora, Te Ripanga |
| Nama BA (Kanaana Ane) | 0.5mm~2.0mm | Te maimoatanga wera kanapa i muri i te hurihuri makariri | He taputapu kihini, he taputapu kihini, he kaupapa hangahanga |
| Nama 4 | 0.4mm~3.0mm | Te whakakoi me te No. 150 ki te No.180 mesh abrasives. Ko nga otinga tino rongonui | Te miraka me te mahi kai, Nga Taputapu o te Hohipera, Tapu Patu |
| Nama 8 | 0.5mm~2.0mm | He mata whakaata rite-whakaata ma te whakakoi me nga abrasive pai ake i te 800 mata | Te whakaata, te whakaata, te whakapaipai o roto-waho mo te hanga |
| HL(Raina Huruhuru) | 0.4mm~3.0mm | Kua oti i te whakakoi raina tonu | Nga kaupapa hoahoanga, nga kaitarai, nga waka taonga kihini |
Hanganga matū
| Kōeke | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Ētahi atu | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Tatoutakai nga hua kowiri tira ki te pepa anti-waikura me nga mowhiti maitai kia kore ai e pakaru.
Ko nga tapanga tohu ka tohua kia rite ki nga tohu paerewa me nga tohutohu a nga kaihoko.
Kei te waatea nga kohinga motuhake mo te hiahia a te kaihoko.
Kowiri tira Kowiri Mokete
Pepa Kowiri tira / Paareti Kowiri tira
Mōkī Tāhei Kowiri tira
Mōkī Tukunga
Ko ta matou kamupene kei Wuxi, e kohikohi ana i te taone o te ahumahi kowiri tira i Haina.
He mea motuhake matou ki nga kowiri tira, nga pepa me te pereti, te paipa kowiri tira me nga taputapu, nga ngongo kowiri tira, me nga hua konumohe me nga hua parahi.
Ko o maatau hua kua tino whakanuihia e o taatau kaihoko mai i Uropi, Amerika, te Middle East, Awherika me te Tonga o Ahia. Ka whakaekea e matou nga hua whakataetae me te ratonga matawhānui ki nga kaihoko.
Kowiri tira Kowiri tira: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 4, 4, 4 430, 430F, 440, 440c,
Kōeke Alloy :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Nickel Alloys Motuhake
I roto i te ahua o : Pae Porowhita, Pae Tapawha, Pae Hexagonal, Pae Papatahi, Koki, Hongere, Profile, Waea, Waea Waea, Rau, Pereti, Paipa Kore, ERW Pipe, Flanges, Fittings, etc.
Q1: He aha te kowiri?
A: Ko te tikanga o te kowiri karekau he tohu i runga i te mata rino, he momo rino ranei e kore e pakaru i te hau, i te wai ranei, kaore e rereke te tae, kore kohakore, he atete ki te poke, te waikura, te kino o nga matū.
Q2: Ko te tikanga ko te kore he waikura?
A: Kao, he kowiri te tikanga ehara i te mea ngawari ki te poke, ki te waikura ranei, he kaha ki te aukati i te poke, te waikura me te waikura.
Q3: Kei te tuku koe i nga pepa kowiri tira?
A: Ae, ka tukuna e matou nga momo momo pepa kowiri tira, me te matotoru o te 0.3-3.0mm. me nga otinga rereke.
Q4: Ka whakaae koe ki te tapahi ki te ratonga roa?
A: Ko te tikanga, ko te pai o te kaihoko ko ta matou kaupapa matua.
Q5: Mena he iti taku ota, ka whakaae koe ki te ota iti?
A: Kaore he raruraru, ko to awangawanga ko to maatau awangawanga, ka whakaaetia nga waahanga iti.
Q6: Me pehea e taea ai e koe te whakamana i to kounga hua?
A: Tuatahi, mai i te timatanga, kua whakatinanahia e matou he wairua ki o ratou hinengaro, ara ko te kounga te oranga, ka whai a matou kaimahi ngaio me nga kaimahi i ia hikoinga kia pai te kii o nga taonga ka tukuna ki waho.
Q7: Ka kohia e koe nga hua?
A: Ko nga tangata ngaio e mahi ana i nga mahi whakakakahu ngaio, he rereke nga momo tarapēke ki nga kaihoko, ohaoha, pai ake ranei.
Q8: He aha e hiahia ana koe ki te mohio mai i te kaihoko i mua i te whakahua tika?
A: Mo te korero tika, me mohio tatou ki te karaehe, te matotoru, te rahi, te mutunga o te mata, te tae me te nui o to ota, me te waahi hoki o nga taonga. Ka nui ake nga korero mo nga hua kua whakaritea, penei i te tuhi, te whakatakotoranga me te mahere. Na ka whakaekea e matou he whakataetae whakataetae me nga korero o runga ake nei.
Q9: He aha te ahua o te wa utu ka whakaaetia e koe?
A: Ka whakaaetia e matou te T / T, te Uniana o te Hauauru, L / C.
Q10: Mena he ota iti tenei, ka tukuna e koe nga taonga ki to maatau kaihoko?
A: Ae, i whanau mai matou ki te whakaoti rapanga o o taatau kaihoko, ka whiwhi maatau i nga taonga ki te whare putunga o to kaihoko ka tukuna atu nga pikitia ki a koe.
Q11: Ka hanga noa koe i te pepa papatahi? E hiahia ana ahau ki te hanga tito mo taku kaupapa hou.
A: Kare, ko te nuinga o taatau te whakaputa i te maimoatanga mata papatahi kowiri tira, i te wa ano, ka hangaia e matou he hua whakarewa kua oti te whakarite kia rite ki te tuhi a te kaihoko me te mahere, ma to maatau tohunga e tiaki te toenga.
Q12: E hia nga whenua i kaweake e koe?
A: Kaweake ki neke atu i te 50 whenua te nuinga i Amerika, Russia, UK, Kuwait, Ihipa, Iran,
Turkey, Jordan, etc.
Q13: Me pehea e taea ai e au etahi tauira?
A: Nga tauira iti kei roto i te toa ka taea te whakarato i nga tauira mo te kore utu. Kei te waatea a Catalgue, te nuinga
tauira kei a matou nga tauira kua rite i roto i nga taonga. Ko nga tauira kua whakaritea mo te 5-7days.
Q14: He aha te tuku?
A: Ko te wa tuku o te ota tauira ko 5- 7 ra. Ko nga ota ipu he 15-20 nga ra.
Q15: He aha te tono mo o Hua?
A: 1.Elevator tatau/cabin ranei me te escalator taha-taiepa.
2. Te whakakikorua i te pakitara o roto, o waho ranei o te rūma hui/ wharekai.
3. Facade i te wa e whakakikoruatia ana tetahi mea, penei i nga pou o te tomokanga.
4. He tuanui i te hokomaha. 5. Te tuhi whakapaipai i etahi waahi whakangahau.
Q16: Kia pehea te roa ka taea e koe te Whakaae mo tenei Hua / Mutu?
A: Taurangi tae mo te neke atu i te 10 tau. Ka taea e te tiwhikete kounga rauemi taketake
kia whakaratohia.
