430 Pepa Kowiri tira Maamaa kua oti te whakakii (BA).
Whakaahuatanga Poto:
Matotoru: 0.15mm-3.00mm (Mao Hurihia)
3.00mm-8.00mm ( Wera Hurihia )
Whānui: 1000mm, 1219mm, 1250mm, 1500mm, 1800mm, 2000mm, etc
Te roa: 2000mm, 2440mm, 2500mm, 3000mm, 3048mm, 5800mm, 6000mm ranei hei whakaritenga a nga kaihoko
430 Pepa Kowiri tiraMaamaa Anaaled (BA) Mutu
Tauira No.430BA OTI
Hanga i Haina
Ko te 430 kanapa kareira (BA) mutu he kowiri tira matao hurihia he mea whakahiato i roto i te hau whakahaere hei pupuri i te tino whakaata. Ahakoa kaore i te tino rite ki te otinga whakaata #8, he rite tonu te ahua. Ko te 430 he kowiri tira kanapa kanapa he kiriata PVC kei tetahi taha hei awhina i te whakamarumaru i te rakuraku i te wa e hanga ana me te whakaurunga.
430 BA Whakaoti Pepa kowiri tira
Rahi: T.: 0.3-3.0mm
W.: 1000~2000mm
Ko te BA Mutu ka tiakina e te kiriata PVC kia kore ai e pakaru.
Ko te 430 he mea iti ake i te raupapa 300 me te whakamahia mo nga tono ina hiahia te whakarewa ki te pupuri i tetahi aukume, kaore e mahia e te raupapa 300. 430 te pepa kowiri tira kanapa kua oti te whakaraerae he paku whakaraerae ki te waikura i te mea kaore he nickel, molybdenum ranei penei i te raupapa 300
TE HOTO MAITA:
430 KAUPAPA KAUPAPA | |
| % | |
| C | MAX. 0.120 |
| Cr | 16.00-18.00 |
| Mn | MAX. 1.0 |
| Ni | |
| P | MAX. 0.040 |
| Si | MAX. 0.75 |
| S | MAX. 0.03 |
WHAKAMAHI TINO:
430 KAUPAPA KAUPAPA | |
| 0.2 YS | MIN. 205 N/MM2 |
| TS | MIN. 450 N/MM2 |
| EL | 22% |
| HV | |
| HRB | MAX. 89 |
| WHAKAMAHI POKO | 180 WAEKE |
Te rahi o te pepa kowiri tira 430
| Kōeke: | 430 |
| Ētahi atu Kōeke: | AISI 304L, AISI 430, AISI 316L, 202, 201, AISI 301, AISI 409L |
| Mata: | 2D, 2B, BA, NO.1, NO.3, NO.4, HL, HairLine, NO.8 (MIRROR), Ethching. |
| Mātotoru: | Huri-Mao 0.1mm~3.0mm Hot-Rolled 3.0mm~25mm |
| Whānui: | 1000MM, 1219MM, 1250MM, 1500MM, Max 1524mm (5ft) |
| Roa: | 2000MM, 2438MM, 2500MM, 3000MM, Max 6000mm |
Koeke Rauemi
| Rauemi | ASTM A240 Paerewa | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410 9S |
| ASTM A480 Paerewa | 302. 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S334525, S334525, S 03, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Paerewa | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Paerewa | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS301S1, SUS309S, SUS309S, SUS309S, SUS309S, J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J3L, SUS329J4L, SUS329J4 0, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Whakatakotoranga Hua
| Whakaoti | Te matotoru | Nga ahuatanga | Nga tono |
| Nama 1 | 3.0mm~50.0mm | Kua oti i te wera-roke, te annealing me te tiki, e tohuhia ana e te mata î ma | Nga taputapu ahumahi matū, Taeke Ahumahi |
| Nama 2B | 0.3mm~6.0mm | Ka oti i te maimoatanga wera, te tiki i muri i te hurihanga matao, ka whai i te raina paahi kiri kia marama ake, kia maeneene te mata | Whakamahinga Whanui Nga Taonga Hauora, Te Ripanga |
| Nama BA (Kanaana Ane) | 0.5mm~2.0mm | Te maimoatanga wera kanapa i muri i te hurihuri makariri | He taputapu kihini, he taputapu kihini, he kaupapa hangahanga |
| Nama 4 | 0.4mm~3.0mm | Te whakakoi me te No. 150 ki te No.180 mesh abrasives. Ko nga otinga tino rongonui | Te miraka me te mahi kai, Nga Taputapu o te Hohipera, Tapu Patu |
| Nama 8 | 0.5mm~2.0mm | He mata whakaata rite-whakaata ma te whakakoi me nga abrasive pai ake i te 800 mata | Te whakaata, te whakaata, te whakapaipai o roto-waho mo te hanga |
| HL(Raina Huruhuru) | 0.4mm~3.0mm | Kua oti i te whakakoi raina tonu | Nga kaupapa hoahoanga, nga kaitarai, nga waka taonga kihini |
Hangahanga matū
| Kōeke | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Ētahi atu | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Tatoutakai nga hua kowiri tira ki te pepa anti-waikura me nga mowhiti maitai kia kore ai e pakaru.
Ko nga tapanga tohu ka tohua kia rite ki nga tohu paerewa me nga tohutohu a nga kaihoko.
Kei te waatea nga kohinga motuhake mo te hiahia a te kaihoko.
Kowiri tira Kowiri Mokete
Pepa Kowiri tira / Paareti Kowiri tira
Mōkī Tāhei Kowiri tira
Mōkī Tukunga
Ko ta matou kamupene kei Wuxi, e kohikohi ana i te taone o te ahumahi kowiri tira i Haina.
He mea motuhake matou ki nga kowiri tira, nga pepa me te pereti, te paipa kowiri tira me nga taputapu, nga ngongo kowiri tira, me nga hua konumohe me nga hua parahi.
Ko o maatau hua kua tino whakanuihia e o taatau kiritaki mai i Uropi, Amerika, te Middle East, Awherika me te Tonga o Ahia. Ka whakaekea e matou nga hua whakataetae me te ratonga matawhānui ki nga kaihoko.
Kowiri tira: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 4, 4, 4, 4, 4, 4 30F, 440, 440c,
Kōeke Alloy :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Nickel Alloys Motuhake
I roto i te ahua o : Pae Porowhita, Pae Tapawha, Pae Hexagonal, Pae Papatahi, Koki, Hongere, Profile, Waea, Waea Waea, Rau, Pereti, Paipa Kore, ERW Pipe, Flanges, Fittings, etc.
Q1: He aha te kowiri?
A: Ko te tikanga o te kowiri karekau he tohu i runga i te mata rino, he momo rino ranei e kore e pakaru i te hau, i te wai ranei, kaore e rereke te tae, kore kohakore, he atete ki te poke, te waikura, te kino o nga matū.
Q2: Ko te tikanga ko te kore he waikura?
A: Kao, he kowiri te tikanga ehara i te mea ngawari ki te poke, ki te waikura ranei, he kaha ki te aukati i te whakapouri, te waikura me te waikura.
Q3: Kei te tuku koe i nga pepa kowiri tira?
A: Ae, ka tukuna e matou nga momo momo pepa kowiri tira, me te matotoru o te 0.3-3.0mm. me nga otinga rereke.
Q4: Ka whakaae koe ki te tapahi ki te ratonga roa?
A: Ko te tikanga, ko te pai o te kaihoko ko ta matou kaupapa matua.
Q5: Mena he iti taku ota, ka whakaae koe ki te ota iti?
A: Kaore he raruraru, ko to awangawanga ko to maatau awangawanga, ka whakaaetia nga waahanga iti.
Q6: Me pehea e taea ai e koe te whakamana i to kounga hua?
A: Tuatahi, mai i te timatanga, kua whakatinanahia e matou he wairua ki o ratou hinengaro, ara ko te kounga te oranga, ka whai a matou kaimahi ngaio me nga kaimahi i ia hikoinga kia pai te kii o nga taonga ka tukuna ki waho.
Q7: Ka kohikohi koe i nga hua?
A: Ko nga tangata ngaio e mahi ana i nga mahi whakakakahu ngaio, he rereke nga momo tarapēke ki nga kaihoko, ohaoha, pai ake ranei.
Q8: He aha e hiahia ana koe ki te mohio mai i te kaihoko i mua i te whakahua tika?
A: Mo te korero tika, me mohio tatou ki te karaehe, te matotoru, te rahi, te mutunga o te mata, te tae me te nui o to ota, me te waahi hoki o nga taonga. Ka nui ake nga korero mo nga hua kua whakaritea, penei i te tuhi, te whakatakotoranga me te mahere. Na ka whakaekea e matou he whakataetae whakataetae me nga korero o runga ake nei.
Q9: He aha te ahua o te wa utu ka whakaaetia e koe?
A: Ka whakaaetia e matou te T / T, te Uniana o te Hauauru, L / C.
Q10: Mena he ota iti tenei, ka tukuna e koe nga taonga ki to maatau kaihoko?
A: Ae, i whanau mai matou ki te whakaoti rapanga o o taatau kaihoko, ka whiwhi maatau i nga taonga ki te whare putunga o to kaihoko ka tukuna atu nga pikitia ki a koe.
Q11: Ka hanga noa koe i te pepa papatahi? E hiahia ana ahau ki te hanga tito mo taku kaupapa hou.
A: Kare, ko te nuinga o taatau te whakaputa i te maimoatanga mata papatahi kowiri tira, i te wa ano, ka hangaia e matou he hua whakarewa kua oti te whakarite kia rite ki te tuhi a te kaihoko me te mahere, ma to maatau tohunga e tiaki te toenga.
Q12: E hia nga whenua i kaweake e koe?
A: Kaweake ki neke atu i te 50 whenua te nuinga i Amerika, Russia, UK, Kuwait, Ihipa, Iran,
Turkey, Jordan, etc.
Q13: Me pehea e taea ai e au etahi tauira?
A: Nga tauira iti kei roto i te toa ka taea te whakarato i nga tauira mo te kore utu. Kei te waatea a Catalgue, te nuinga
tauira kei a matou nga tauira kua rite i roto i nga taonga. Ko nga tauira kua whakaritea mo te 5-7days.
Q14: He aha te tuku?
A: Ko te wa tuku o te ota tauira ko 5- 7 ra. Ko nga ota ipu he 15-20 nga ra.
Q15: He aha te tono mo o Hua?
A: 1.Elevator tatau/cabin ranei me te escalator taha-taiepa.
2. Te whakakikorua i te pakitara o roto, o waho ranei o te rūma hui/ wharekai.
3. Facade i te wa e whakakikoruatia ana tetahi mea, penei i nga pou o te tomokanga.
4. He tuanui i te hokomaha. 5. Te tuhi whakapaipai i etahi waahi whakangahau.
Q16: Kia pehea te roa ka taea e koe te Whakaae mo tenei Hua / Mutu?
A: Taurangi tae mo te neke atu i te 10 tau. Ka taea e te tiwhikete kounga rauemi taketake
kia whakaratohia.
