Stainless vy 321/321H perforated Sheets
Famaritana fohy:
Stainless vy 321/321H perforated Sheets
Stainless vy 321/321H perforated Sheet famaritana
Standard: ASTM / ASME A240 / SA240
Habe : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Haavony: 0.1mm hatramin'ny 12mm Thk
Endriny : Lavaka boribory haingon-trano, Dimpled, Lavaka efamira, Lavaka boribory fitaratra volamena, totohondry boribory, voasokitra, taratasy miloko miloko.
Famaranana: takelaka mihodinkodina mafana (HR), takelaka mihodinkodina mangatsiaka (CR), 2B, 2D, BA NO (8), SATIN (Nifanena tamin'ny plastika mifono plastika)
Hardness: malefaka, mafy, antsasaky ny mafy, Quarter mafy, lohataona mafy sns.
Ireo singa mifandraika amin'ny SS321/321H
| Malagasy | WERKSTOFF NY. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 321 | 1.4541 / 1.4878 | S32100 / S32109 | SUS 321 | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17-11-02 / Z3CND18-14-03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
Stainless Steel 321/321H Perforated Sheet Famoronana simika
| singa | SS 321 |
| C | 0,035 max |
| Mn | 2.0 max |
| Si | 1.0 max |
| P | 0,045 max |
| S | 0,030 max |
| Cr | 16 – 18 |
| Ni | 10 – 14 |
| Mo | 2 – 3 |
| Fe | 68.89 min |
Toetran'ny mekanika SS 321/321H perforated Sheet
| singa | SS 321 |
| hakitroky | 8,0 g/cm3 |
| Teboka fandoroana | 1399 °C (2550 °F) |
| Faharetana amin'ny sintona | Psi – 75000, MPa – 515 |
| Tanjaky ny vokatra (0,2% Offset) | Psi – 30000, MPa – 205 |
| Elongation | 35 % |
Karazana taratasy mivalona SS 321/321H
Stainless vy 321/321H perforated Sheet
SS 321 Dimpled Perforated Sheet
Fomba haingon-tranoTakelaka data SS321Hs
A240Takelaka data SS321Hs
SS 321H Mirror Finish Perforated Sheet
SS 321 Galvanised Perforated Sheets
WERKSTOFF NY. 1.4541 taratasy mivalona
2b vitaSS 321 taratasy misy lavaka
SS 321H Round Hole Perforated Sheets
WERKSTOFF NY. 1.4878 taratasy mivalona
SS 321/321H Cold Rolled Perforated Sheets
SS 321 CR Galvanised Perforated Sheets
SS 321H Cold Rolled Perforated Sheets
UNS S32109 Cold Rolled Perforated Sheets
A240 SS 321H Cold Rolled Perforated Sheet
WERKSTOFF NY. 1.4541
Export poloney SS 321 CR perforated Sheet
WERKSTOFF NY. 1.4878
UNS S32109 Cold Rolled Perforated Sheets
Lavaka boribory SS 321H Cold Rolled Perforated Sheets
SS 321 2b vita amin'ny Cold Rolled Perforated Sheet
SS 321/321H Hot Rolled Perforated Sheets
SS 321 HR galvanized perforated Sheets
SS 321H Hot Rolled Perforated Sheets
UNS S32100 Hot Rolled Perforated Sheet
A240 SS 321 Hot Rolled Perforated Sheet
Hot Rolled Round Hole SS 321 Perforated Sheets
SS 321H 2b vita amin'ny takelaka vita amin'ny gorodona mafana
WERKSTOFF NY. 1.4541 Hot Rolled Perforated Sheet
UNS S32109 Hot Rolled Perforated Sheet
Manondrana ny poloney SS 321H HR perforated Sheets
WERKSTOFF NY. 1.4878 Hot Rolled Perforated Sheet
Naoty ara-pitaovana
| KEVITRA | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410 410 |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228. 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S310254, S310254, S310254 S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32204, S32204 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS3010S, SUS SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J1, SUS317J1, SUS317J1, SUS317J1, SUS317J1, SUS317J1, SUS317J1 SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS4364 SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| farany | hateviny | toetra | Applications |
| No. 1 | 3.0mm~50.0mm | Vita amin'ny alalan'ny hot rolling, annealing sy pickling, miavaka amin'ny fotsy nalona ambonin'ny | Fitaovana indostrialy simika, tanky indostrialy |
| No. 2B | 0.3mm~6.0mm | Vita amin'ny hafanana fitsaboana, pickling aorian'ny mangatsiaka Rolling, arahin'ny hoditra mandalo tsipika mba hamirapiratra kokoa sy malama ambonin'ny | Fitaovana ara-pitsaboana ankapobeny, kojakoja an-databatra |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Fitsaboana hafanana mamiratra aorian'ny fanodikodinana mangatsiaka | Fitaovana an-dakozia, fitaovana an-dakozia, tanjona ara-javakanto |
| No. 4 | 0.4mm~3.0mm | Polisy amin'ny No. 150 ny No.180 harato abrasives. Ny famaranana malaza indrindra | Toeram-pikarakarana ronono sy sakafo, Fitaovana hôpitaly, koveta fandroana |
| No. 8 | 0.5mm ~ 2.0mm | Tarehim-baravarankely miendrika fitaratra amin'ny famolahana amin'ny abrasive tsara kokoa mihoatra ny 800 mesh | Reflector, fitaratra, haingon-trano anatiny-ivelany ho an'ny fanorenana |
| HL (Taratasy volo) | 0.4mm~3.0mm | Vita amin'ny fikosoham-bary tsy tapaka | Tanjona ara-javakanto, escalator, fiara fitaovan-dakozia |
Famoronana simika
| kilasy | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | hafa | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
iSIKAfonosina amin'ny taratasy manohitra ny harafesina sy peratra vy ny vokatra vita amin'ny vy mba hisorohana ny fahasimbana.
Ny etikety famantarana dia voamarika araka ny toromarika mahazatra na ny torolalan'ny mpanjifa.
Ny fonosana manokana dia misy araka ny takian'ny mpanjifa.
Fonosana Coil Stainless Steel
Fonosana Plate Stainless Steel / Plate Stainless Steel
Fonosana Strip Stainless Steel
Fonosana fandefasana
Ny orinasanay dia miorina ao Wuxi, manangona tanàna indostrialy stainless vy any Shina.
Izahay dia manam-pahaizana manokana amin'ny coils stainless, ravin-taratasy sy takelaka, fantsona vy tsy misy vy sy fitaovana, fantsona vy tsy misy vy, ary koa vokatra aluminium sy vokatra varahina.
Ny vokatray dia noderain'ny mpanjifanay avy any Eoropa, Amerika, Afovoany Atsinanana, Afrikana ary Azia Atsimo Atsinanana. Hanolotra vokatra mifaninana sy serivisy feno ho an'ny mpanjifa izahay.
Stainless vy Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 4, 4, 4 430, 430F, 440, 440c,
Alloy Grade: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminum, Alloy Steel, Carbon Steel, Nikela manokana
Amin'ny endrika: Bara boribory, Bara efajoro, Bara Hexagonal, Bara fisaka, zoro, fantsona, mombamomba, tariby, tariby tariby, takelaka, takelaka, fantsona tsy misy tariby, fantsona ERW, Flanges, Fittings, sns.
Q1: Inona no atao hoe stainless?
A: Stainless dia midika hoe tsy misy marika eo amin'ny vy ambonin'ny, na karazana vy izay tsy simban'ny rivotra na ny rano sy izay tsy miova loko, tsy misy pentina, mahatohitra ny staining, harafesina, ny manimba ny vokatry ny zavatra simika.
Q2: Stainless midika hoe tsy harafesina?
A: Tsia, ny stainless dia midika fa tsy mora voaloto na harafesina, manana fahaiza-manao manokana izy hanohitra ny fandotoana, ny harafesina ary ny harafesina.
Q3: Manome takelaka vy ve ianao?
A: Eny, manome karazana vy tsy misy vy izahay, miaraka amin'ny hatevin'ny 0.3-3.0mm. ary amin'ny endriny samihafa.
Q4: Manaiky ny serivisy tapaka amin'ny halavany ve ianao?
A: Mazava ho azy fa ny fahafaham-pon'ny mpanjifa no laharam-pahamehanay.
Q5: Raha manana baiko kely aho, manaiky baiko kely ve ianao?
A: Tsy olana, ny ahiahinao dia ny ahiahinay, ny kely dia ekena.
Q6: Ahoana no ahafahanao miantoka ny kalitaon'ny vokatrao?
A: Voalohany, hatramin'ny voalohany, efa nampihatra fanahy ao an-tsain'izy ireo izahay, izany hoe ny kalitaon'ny fiainana, ny mpiasa matihanina sy ny mpiasanay dia hanaraka ny dingana rehetra mandra-pahatongan'ny entana tsara sy alefa.
Q7: Hameno ny vokatra ve ianao?
A: Manao famonosana matihanina ny olona matihanina, manana karazana fonosana samihafa isika tsy voatery ho an'ny mpanjifa, ara-toekarena na tsara kokoa.
Q8: Inona no tokony ho fantatrao amin'ny mpanjifa alohan'ny fanononana marina?
A: Ho an'ny teny nindramina marina, mila mahafantatra ny kilasy, ny hateviny, ny habeny, ny endriny, ny loko ary ny habetsahan'ny baikonao, ary koa ny toerana halehan'ny entana. Ny fampahalalana momba ny vokatra namboarina dia ilaina bebe kokoa, toy ny sary, famolavolana ary drafitra. Avy eo dia hanolotra teny nindramina mifaninana miaraka amin'ny fampahalalana etsy ambony.
Q9: Inona no karazana fe-potoana fandoavam-bola raisinao?
A: Manaiky T / T, West Union, L / C.
Q10: Raha baiko kely izany, handefa ny entana amin'ny masonay ve ianao?
A: Eny, teraka izahay hamaha ny olan'ny mpanjifanay, ho azonay soa aman-tsara any amin'ny trano fanatobiana entana ny entanao ary handefa ny sary ho anao.
F11: Manao takelaka fisaka fotsiny ve ianao? Te hanao famoronana ho an'ny tetikasako vaovao aho.
A: Tsia, izahay no tena mamokatra Stainless vy fisaka fisaka fitsaboana ambonin'ny, miaraka amin'izay koa, manamboatra namboarina metaly vita vokatra araka ny mpanjifa ny sary sy ny drafitra, ny teknisianina no hikarakara ny sisa.
F12: Firy ny firenena efa naondranao?
A: Naondrana tany amin'ny firenena 50 mahery indrindra avy any Amerika, Rosia, UK, Koety, Ejipta, Iran,
Torkia, Jordania, sns.
Q13: Ahoana no ahafahako mahazo santionany sasany?
A: Santionany kely ao amin'ny fivarotana ary afaka manome ny santionany maimaim-poana. Misy ny Catalgue, ny ankamaroany
lamina manana santionany vonona amin'ny tahiry. Ny santionany namboarina dia haharitra 5-7 andro.
Q14: Inona ny fanaterana?
A: Sample baiko ny fotoana fanaterana dia 5-7 andro. 15-20 andro eo ho eo ny baikon'ny container.
Q15: Inona no fampiharana momba ny vokatrao?
A: 1. varavarana ascenseur/cabin na sy escalator ny lafiny-rindrina.
2.Fitaovana rindrina anatiny na ivelan'ny efitrano fivoriana / trano fisakafoanana.
3. Facade rehefa manarona zavatra, toy ny andry eo amin'ny lobby.
4. Ny valindrihana ao amin'ny fivarotana lehibe. 5. Fisarihana haingon-trano any amin'ny toerana fialamboly sasany.
Q16: Hafiriana no azonao antoka ho an'ity vokatra / vita ity?
A: loko antoka ho an'ny mihoatra ny 10 taona. Ny certificat kalitaon'ny fitaovana original dia afaka
omena.
