Super Duplex Steel S32750 / S32760 Sheet and Plates
Brevis descriptio:
Super Duplex Steel S32750 / S32760 Sheet and Plates
Super Duplex Steel S32750 / S32760 Sheet and Plate Specification
Standard : ASTM / ASME A240 / SA240
Magnitudo : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Crassitudo: 0.1mm ad 12 mm Thk
Forma: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circulus), Ring (Flange)
Perfice: Calidum involutum laminam (HR), Frigus involutum linteum (CR), 2B, 2D, BA NO (8), SATIN (Met cum Plastic Coated)
Duritia : molle, durum, Dimidium durum, Quarter durum, vere durum etc.
Equivalent Grades Super Duplex S32750 / S32760 Sheet and Plate
| VEXILLUM | WERKSTOFF NR. | UNS |
| Super Duplex | 1.4410 | S32750 / S32760 |
Super Duplex Steel 32750 / 32760
| Elementum | Super Duplex S32750 | Super Duplex S32760 |
| C | 0.030 max | 0.05 max |
| Mn | 1.20 max | 1.00 max |
| Si | 0.80 max | 1.00 max |
| P | 0.003 max | 0.030 max |
| S | 0.013 max | 0.013 max |
| Cr | 24 – 26 | 24 – 26 |
| Mo | 3 - 5 | 3 - 4 |
| Ni | 6 - 8 | 6 - 8 |
| N | 0.24 - 0.32 | 0.20 - 0.30 |
| Fe | 58.095 min | 57.61 min |
Mechanical Properties of Super Duplex 32750 / 32760 Sheet and Plate
| Elementum | Super Duplex 32750 / 32760 |
| Density | 7.8 g/cm3 |
| Liquefactio Point | 1350 °F (2460 °F) |
| Distrahens fortitudo | ksi - 116 |
| Cedant fortitudo (0.2% Offset) | ksi - 80 |
| Prolongatio | 15 % |
Genera Super Duplex Steel S32750 / S32760 Sheets and Plates
Super Duplex Steel S32750 / S32760 Sheet
2b finish Super Duplex 32760 Sheet
#4 finish Super Duplex S32750 Sheet
Super Duplex S32760
A240 Super Duplex 32750 Sheet
WERKSTOFF NR. 1.4410 Sheet
Super Duplex Steel 32750 Speculum Finish Sheet
#8 Finish Super Duplex S32760 Sheet
4 Super Duplex 32750 Sheet
Super Duplex S32760 Sheet
Super Duplex Steel S32750 / S32760 Plate
Super Duplex S32760 Plate
Super Duplex Steel 32750 Speculum Finish Plate
UNS S32750 Plate
WERKSTOFF NR. 1.4410 Plate
2b finish Super Duplex S32760 Plate
#8 Finish Super Duplex 32750 Plate
4 Super Duplex 32760 Plate
Super Duplex S32750 Plate
A240 Super Duplex 32760 Plate
Super Duplex 32750 Plate
Super Duplex 32750/32760 Cold Rolled Sheet/Plates
WERKSTOFF NR. 1.4410 Cold Rolled Sheet & Plates
# 4 finish Super Duplex S32760 Cold Rolled Sheet & Plates
A240 Super Duplex Steel 32760 Cold Rolled Sheet & Plates
UNS S32750 Cold Rolled Sheet & Plates
Super Duplex Steel S32750 2b finish Cold Rolled Sheet & Plates
Export Poloniae Super Duplex Steel 32750 CR Sheet & Plates
Super Duplex Steel S32750 Cold Rolled Sheet & Plates
Super Duplex 32750/32760 Hot Rolled Sheet/Plates
Hot Rolled # 4 finish Super Duplex S32750 Sheet & Plates
Super Duplex Steel S32750 2b finish Hot Rolled Sheet & Plates
A240 Super Duplex Steel 32760 Hot Rolled Sheet & Plates
UNS S32750 Hot Rolled Sheet & Plates
Export Poloniae Super Duplex Steel 32760 HR Sheet & Plates
Super Duplex Steel S32760 Hot Rolled Sheet & Plates
WERKSTOFF NR. 1.4410 Hot Rolled Sheet & Plates
Materia Gradus
| Materia | ASTM A240 Standard | 316. 316. 316. 316. 317. 321. 321. 321H 347*347H 409 410 410S 430 904L. |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367; N08810, N08904,N08926; S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S3225, S3220, S3225, S3250 S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7L, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| perago | Crassitudo | Characteres | Applications |
| No. 1 | 3.0mm~50.0mm | Consummatum calidum volubilem, furnum et salsum, distinctum est superficies alba CONDITANEUS | Industriae chemicae apparatum, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Curatio caloris completa, post volvens frigus servantur, sequitur cutis transeunt linea ut clarior et lenior sit | General Application Instrumenta Medica, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Splendida calor curatio post frigus volubilem | Culina, vas coquina, propositum architecturae |
| No. 4 | 0.4mm~3.0mm | Polonica cum No. 150 ad No.180 reticulum abrasives. Maxime popularibus finiatur | Lac & Cibus facilities expediendi, Hospitalis Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | Speculum quasi reflective superficies poliendo subtilioribus abrasives super DCCC reticulum | Reflector, Speculum, ornatum interioris-exterioris foredificationis |
| HL (Hair Line) | 0.4mm~3.0mm | Consummatum est continua perpolitio linearis | Architecturae causa, escalators, coquina vehiculis |
Compositio chemica
| Gradus | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-1500 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-1500 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-1500 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Other | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Weinvolvere products immaculatam chalybem cum anti-ferrugine charta et anulis ferreis ad impediendum damnum.
Lepidium sativum pittacii tagged secundum normas specificas seu instructiones emptorum.
Specialis sarcina praesto est sicut per mos postulatum.
Diver Coil Package
Diver Sheet / Diver Tab Package
Diver velit sarcina
Shipment Package
Societas nostra in Wuxi fundata est, civitas industriae immaculatae ferro in Sinis congregata.
Nos speciales in globis immaculatis, schedae et laminae, tibiae ferreae immaculatae et caerimoniae, fistulae ferreae immaculatae, necnon aluminium productorum et aes.
Producta nostra magnopere laudantur a clientibus nostris ab Europa, America, Medio Oriente, Africa et Asia Australi. Competiales uberes et comprehensivam servitutem clientibus offeremus.
Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F; 440, 440c;
Alloy Grade : Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Casio Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In forma : Bars rotundus, Quadratus Bars, Hexagonales Bars, Flat Bars, Angli, Canales, Profiles, Fila, Filum Virgae, Plastae, Plates, Inconsutiles Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: Quid est immaculatum?
A: Immaculata significat nullas notas in superficie ferri, vel speciem ferri, quae aere vel aqua non laeditur, nec colorem mutat, immaculatum, tinguere, rubiginem, corrosivum chemicorum effectum renitentem.
Q2: Nihilne rubiginem immaculatam vult?
A: Imo, immaculatum significat haud facile maculatum vel ferrugineum acquirere, specialem facultatem habet maculam, rubiginem et corrosionem resistendi.
Q3: Tu laminas ferro intemerata copia?
A: Imo varias schedas chalybis immaculatas varias suppeditamus, amplitudines ab 0.3-3.0mm. et in diversis finit.
Q4: Recipis caesum tandem obsequium?
A: Scilicet, satisfactio elit summo prioritate nostra est.
Q5: Si parvum ordinem habeo, accipis ordinem parvum?
A: Non problema, sollicitudine nostra cura est, parvae quantitates accipiuntur.
Q6: Quomodo praestas productum qualitas tua?
A: Primo, ab ipso exordio, iam animum ad effectum adduximus, id est qualitas vitae, professionales operarii et baculi singulos gradus sequentur, donec bona bene referta et exsequantur.
Q7: Vis products stipant?
A: Professionales homines faciunt sarcinas professionales, habemus varias rationes ad libitum stipendii clientium, oeconomicum unum vel melius.
Q8: Quid opus est scire de elit ante accuratam sententiam?
A: Accurate sententia, scire oportet gradum, crassitudinem, magnitudinem, metam superficiem, colorem et quantitatem ordinis tui, necnon destinationem bonorum. Producti customised plus opus erit, sicut tractus, layout et ratio. Tunc offeremus competitive auctoritatem cum informatione supra.
Q9: Qualem mercedem term tibi accpet?
A: Accipimus T/T, occidentalem unionem, L/C.
Q10: Si parvus ordo est, bona agenti trades?
A: Ita nati sumus ut problemata nostrorum clientium solvenda, bona incolumiter agentis horreis obtinebimus et picturas tibi mittemus.
Q11: Tu modo plana facere? Volo fabricare pro meo novo incepto.
A: Imo, maxime nos immaculatam ferro superficiem curationis planae producemus, simulque producti metalli nativus confecti sicut per mos tractus et consilium fabricamus, technicus noster de ceteris curabit.
Q12: quot coutries iam emitur?
A: exportatum in plus quam 50 terris maxime ex America, Russia, UK, Cuvaitum, Aegypto, Irania;
Turkey, Jordan, etc.
Q13: quomodo possum aliqua exempla?
A: Parva exempla in copia et exempla gratis praebere possunt. Catalla praesto est, maxime
exemplaria parata habemus exemplaria in stock. Exempla nativus fere 5-7days erit.
Q14: Quid est traditio?
A: Sample ordinis partus dies est 5. 7 dierum. Continens ordines sunt circiter dies 15-20.
Q15: Quid est application circa te Products?
A: 1.elevator portae/cabin vel et maceria latera escalatoris.
2.Wall cladding intra vel extra conventum locus / popina.
3.Facade, cum aliquid colliditur, ut columnae in lobby.
4.Ceiling in macellum. 5. Decorative in quibusdam locis delectationis trahit.
Q16: Quousque spondes pro hoc Product / Perfice?
A: Color spondet plus quam 10 annos. Originale materiae qualis certificatorium can
praeberi.
