Diver 304H Threaded Rods
Brevis descriptio:
Diver 304H Threaded Rods
Diver 304H Threaded RodsSpecification
Standard : ASTM A276 / A479 , ASME SA276 / A479
Bar Size : 3mm~ 800mm
Quadratus Bar Size: 4mm* 4mm ~100mm* 100mm
Flat Bar Size : 2mm ~ 100mm
Hex Bar Size : 2mm ~ 100mm
Crassitudo: 50 mm ad 6000 mm longi
Longitudo: 1 Ad 6 Meters, Consuetudo Cut Longitudo
Forma: Rotundus, Quadratus, Hex (A/F), Rectangulum, Billet, Ingot, Forging etc.
Equivalent Gradus SS 304H Threaded Rods
| VEXILLUM | WERKSTOFF NR. | UNS |
| SS 304H | 1.4948 | S30409 |
Diver 304H Threaded Rods Chemical Compositio
| Elementum | SS 304H |
| C | 0.10 max |
| Mn | 2.0 max |
| Si | 0.75 max |
| P | 0.041 max |
| S | 0.03 max |
| Cr | 18 – 20 |
| Ni | 8 – 10.5 |
Mechanica Proprietates SS 304H Threaded Rods
| Elementum | SS 304H |
| Density | 8.0 g/cm3 |
| Liquefactio Point | 1400 °F (2550 °F) |
| Distrahens fortitudo | Psi - 75000 , MPa - 515 |
| Cedant fortitudo (0.2% Offset) | Psi - 300000 , MPa - 205 |
| Prolongatio | 40% |
Genera SS 304H Threaded Rods
Diver 304H Threaded Rods
SS 304H duplex finis Threaded Rods
Composuerunt SS 304H Threaded Rods
SS 304H polita Threaded Rods
WERKSTOFF NR. 1.4948 Threaded Rods
SS 304H Single finem Threaded Rods
Diver 304H utrumque Threaded Rods
Diver 304H Galvanized Threaded Rods
SS 304H Threaded Rods
A276 SS 304H Threaded Rods
Plene SS 304H Threaded Rods
S. 304H Omnes-filae Threaded Rods
Plene S. 304H ementiti sunt Rods
SS 304H polita plene Threaded Rods
UNS S30409 Plene Threaded Rods
WERKSTOFF NR. 1.4948 Plene Threaded Rods
SS 304H Galvanized Plene Threaded Rods
SS 304H Long plene Threaded Rods
SS 304H Fine Threaded Rods
Plene SS 304H Threaded Rods
A276 SS
SS 304H Frigus Rolled Threaded Rods
SS 304H CR Galvanized Threaded Rods
Export Poloniae SS 304H CR Threaded Rods
SS 304H Cold Rolled Single end Threaded rods
UNS S30409 Frigus Rolled Threaded dii
WERKSTOFF NR. 1.4948 Frigus Rolled Threaded Rods
SS 304H Cold Rolled Fine Threaded Rods
SS 304H Cold Rolled Double End Threaded Rods
SS 304H Frigus Rolled Long Threaded Rods
SS 304H Frigus Rolled Threaded Rods
A276 SS 304H Frigus Rolled Threaded Rods
SS 304H Hot Rolled Threaded Rods
SS 304H Hot Rolled Fine Threaded Rods
SS 304H HR Galvanized Threaded Rods
Exportare Poloniae SS 304H HR Threaded Rods
UNS S30409 Hot Rolled Threaded Rods
WERKSTOFF NR. 1.4948 Hot Rolled Threaded Rods
SS 304H Hot Rolled Long Threaded Rods
SS 304H Hot Rolled Single End Threaded Rods
SS 304H Hot Rolled Double End Threaded Rods
SS 304H Hot Rolled Threaded Rods
A276 SS 304H Hot Rolled Threaded Rods
Materia Gradus
| Materia | ASTM A240 Standard | 316. 316. 316. 316. 317. 321. 321. 321H 347*347H 409 410 410S 430 904L. |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367; N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32053, S32001, S32053, S31727, S32228, S34565, S35315, S31200, S31803, S32001, S32053, S32001, S32053 S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| perago | Crassitudo | Characteres | Applications |
| No. 1 | 3.0mm~50.0mm | Consummatum calidum volubilem, furnum et salsum, distinctum est superficies alba CONDITANEUS | Industriae chemicae apparatum, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Curatio caloris completa, post volvens frigus servantur, sequitur cutis transeunt linea ut clarior et lenior sit | General Application Instrumenta Medica, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Splendida calor curatio post frigus volubilem | Culina, vas coquina, propositum architecturae |
| No. 4 | 0.4mm~3.0mm | Polonica cum No. 150 ad No.180 reticulum abrasives. Maxime popularibus finiatur | Lac & Cibus facilities expediendi, Hospitalis Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | Speculum quasi reflective superficies poliendo subtilioribus abrasives super DCCC reticulum | Reflector, Speculum, ornatum interioris-exterioris foredificationis |
| HL (Hair Line) | 0.4mm~3.0mm | Consummatum est continua perpolitio linearis | Architecturae causa, escalators, coquina vehiculis |
Compositio chemica
| Gradus | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-1500 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-1500 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-1500 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Other | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Weinvolvere products immaculatam chalybem cum anti-ferrugine charta et anulis ferreis ad impediendum damnum.
Lepidium sativum pittacii tagged secundum normas specificas seu instructiones emptorum.
Specialis sarcina praesto est sicut per mos postulatum.
Diver Coil Package
Diver Sheet / Diver Tab Package
Diver velit sarcina
Shipment Package
Societas nostra in Wuxi fundata est, civitas industriae immaculatae ferro in Sinis congregata.
Nos speciales in globis immaculatis, schedae et laminae, tibiae ferreae immaculatae et caerimoniae, fistulae ferreae immaculatae, necnon aluminium productorum et aes.
Producta nostra magnopere laudantur a clientibus nostris ab Europa, America, Medio Oriente, Africa et Asia Australi. Competiales uberes et comprehensivam servitutem clientibus offeremus.
Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F; 440, 440c;
Alloy Grade : Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Casio Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In forma : Bars rotundus, Quadratus Bars, Hexagonales Bars, Flat Bars, Angli, Canales, Profiles, Fila, Filum Virgae, Plastae, Plates, Inconsutiles Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: Quid est immaculatum?
A: Immaculata significat nullas notas in superficie ferri, vel speciem ferri, quae aere vel aqua non laeditur, nec colorem mutat, immaculatum, tinguere, rubiginem, corrosivum chemicorum effectum renitentem.
Q2: Nihilne rubiginem immaculatam vult?
A: Imo, immaculatum significat haud facile maculatum vel ferrugineum acquirere, specialem facultatem habet maculam, rubiginem et corrosionem resistendi.
Q3: Tu laminas ferro intemerata copia?
A: Imo varias schedas chalybis immaculatas varias suppeditamus, amplitudines ab 0.3-3.0mm. et in diversis finit.
Q4: Recipis caesum tandem obsequium?
A: Scilicet, satisfactio elit summo prioritate nostra est.
Q5: Si parvum ordinem habeo, accipis ordinem parvum?
A: Non problema, sollicitudine nostra cura est, parvae quantitates accipiuntur.
Q6: Quomodo praestas productum qualitas tua?
A: Primo, ab ipso exordio, iam animum ad effectum adduximus, id est qualitas vitae, professionales operarii et baculi singulos gradus sequentur, donec bona bene referta et exsequantur.
Q7: Vis products stipant?
A: Professionales homines faciunt sarcinas professionales, habemus varias rationes ad libitum stipendii clientium, oeconomicum unum vel melius.
Q8: Quid opus est scire de elit ante accuratam sententiam?
A: Accurate sententia, scire oportet gradum, crassitudinem, magnitudinem, metam superficiem, colorem et quantitatem ordinis tui, necnon destinationem bonorum. Producti customised plus opus erit, sicut tractus, layout et ratio. Tunc offeremus competitive auctoritatem cum informatione supra.
Q9: Qualem mercedem term tibi accpet?
A: Accipimus T/T, occidentalem unionem, L/C.
Q10: Si parvus ordo est, bona agenti trades?
A: Ita nati sumus ut problemata nostrorum clientium solvenda, bona incolumiter agentis horreis obtinebimus et picturas tibi mittemus.
Q11: Tu modo plana facere? Volo fabricare pro meo novo incepto.
A: Imo, maxime nos immaculatam ferro superficiem curationis planae producemus, simulque producti metalli nativus confecti sicut per mos tractus et consilium fabricamus, technicus noster de ceteris curabit.
Q12: quot coutries iam emitur?
A: exportatum in plus quam 50 terris maxime ex America, Russia, UK, Cuvaitum, Aegypto, Irania;
Turkey, Jordan, etc.
Q13: quomodo possum aliqua exempla?
A: Parva exempla in copia et exempla gratis praebere possunt. Catalla praesto est, maxime
exemplaria parata habemus exemplaria in stock. Exempla nativus fere 5-7days erit.
Q14: Quid est traditio?
A: Sample ordinis partus dies est 5. 7 dierum. Continens ordines sunt circiter dies 15-20.
Q15: Quid est application circa te Products?
A: 1.elevator portae/cabin vel et maceria latera escalatoris.
2.Wall cladding intra vel extra conventum locus / popina.
3.Facade, cum aliquid colliditur, ut columnae in lobby.
4.Ceiling in macellum. 5. Decorative in quibusdam locis delectationis trahit.
Q16: Quousque spondes pro hoc Product / Perfice?
A: Color spondet plus quam 10 annos. Originale materiae qualis certificatorium can
praeberi.
