Monel CD Ford FITTINGS
Brevis descriptio:
DENUNTIATIO FITTINGS MONEL
Monel stannum series productorum excellentes proprietates corporis altae virium habent, altae resistentiae corrosio et resistentia gerunt.
Describere:
In petrochemical industria, nuclei industria, defensione nationali aliisque industriae provectis, tam magnae partes et partes et aliae industriae magnae virium, magnae resistentiae corrosio et resistentia princeps indumentorum usus est.
Monel CD Cubitus
ASME SB564 Monel 400 Copulatio
ASME B16.11 Monel UNS N04400 Street Cubitus
Admisce CD Equale Tee
Monel CD Cross
Monel DIN 2.4360 Socket pugillo Tee
Monel 400 Union
ASTM B564 Admisce 400 Pipe Nipple
Monel N04400 90 Deg. Post Cubitus
Monel 400 MSS, SP-95 Swage Nipple
Monel DIN 2.4360 Bushing
Admisce CD Pressura Forged Pipe Cap
Aequivalent Gradus ASME SB564 Monel CD Ford Fittings
| VEXILLUM | UNS | WERKSTOFF NR. | JIS | AFNOR | BS | GOST | EN |
| Monel Alloy 400 | N04400 | 2.4360 | NW 4400 | NU-30M | NA 13 | 28-2,5-1,5 | NiCu30Fe |
Monel CD Forged Fittings Specification
Specifications : ASTM B564 / ASME SB564
Dimensiones : ASME B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, MSS-SP-97, BS3799.
Magnitudine: 1/8″ NB ad 4″ NB (Socketweld & Screwed-Threaded)
Typus: Socketweld Fittings, Screwed-Fittings (NPT vel TP Type)
Rating Pressure: Threaded End - 2000 /3000/ 6000 LBS. Socket pugillaribus - 3000 / 6000/ 9000 LBS.
Standard Specification for Monel 400 SocketWeld / Threaded Pipe Fitting
Monel CD Forged Pipe Fittings Chemical Properties
| Gradus | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Monel CD Forged Fittings Mechanical Properties
| Elementum | Density | Liquefactio Point | Distrahens fortitudo | Cedant fortitudo (0.2% Offset) | Prolongatio |
| Monel 400 | 8.8 g/cm3 | 1350 °F (2460 °F) | Psi – 80,000, MPa – 550 | Psi - 35,000 , MPa - 240 | 40% |
Monel stannum series productorum excellentes proprietates corporis altae virium habent, altae resistentiae corrosio et resistentia gerunt.
Describere:
In petrochemical industria, nuclei industria, defensione nationali aliisque industriae provectis, tam magnae partes et partes et aliae industriae magnae virium, magnae resistentiae corrosio et resistentia princeps indumentorum usus est.
FRUCTUS SPECIFICATION
| Product Name | Monel Fittings |
| Type | Necessaria |
| Diameter exterior | 6-250mm， (3/8″-100″) |
| Standard | ASTM，AISI，JIS, GB， DIN, EN |
| Superficies | BA，2B，NO.1，NO.4，4K，HL，8K |
| Certification | ISO, SGS，BV |
| Ars | Frigus instructa inconsutilis tube / iuncta pipe |
| Ore | Molendinum Edge Slit Edge |
| Qualitas | SGS Inspectionis |
| Pretium Term | CIF CFR MOB EX OPERIS |
| Payment Terms | T/T L/C et Occidentalis Unionis etc |
| Applicationem | In summo temperatura et electrica industria, medicinae machinis, constructionis, chemiae, cibi industriae, agri culturae, et navis componentibus, usus est. Etiam ad cibum et potum sarcinas pertinet, coquinae commeatus, impedimenta, aircraft, TRADUCTOR cingula, vehicula, fulmina, nuces, fontes, reticulum et reticulum etc. |
PARS
| SEQUENTIA | DIN/EN | UNS NO | TERMUM GENERICUM | PARS | |
| 1 | 2.4360 | N04400 | MONEL400 | 63Ni-32Cu-1Fe-0.1C | |
| 2 | 2.4375 | N05500 | MONEL K-D | 63Ni-30Cr-1Fe-3Al-0.6Ti-0.1C | |
Materia Gradus
| Materia | ASTM A240 Standard | 316. 316. 316. 316. 317. 321. 321. 321H 347*347H 409 410 410S 430 904L. |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367; N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32053, S32001, S32053, S31727, S32228, S34565, S35315, S31200, S31803, S32001, S32053, S32001, S32053 S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| perago | Crassitudo | Characteres | Applications |
| No. 1 | 3.0mm~50.0mm | Consummatum calidum volubilem, furnum et salsum, distinctum est superficies alba CONDITANEUS | Industriae chemicae apparatum, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Curatio caloris completa, post volvens frigus servantur, sequitur cutis transeunt linea ut clarior et lenior sit | General Application Instrumenta Medica, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Splendida calor curatio post frigus volubilem | Culina, vas coquina, propositum architecturae |
| No. 4 | 0.4mm~3.0mm | Polonica cum No. 150 ad No.180 reticulum abrasives. Maxime popularibus finiatur | Lac & Cibus facilities expediendi, Hospitalis Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | Speculum quasi reflective superficies poliendo subtilioribus abrasives super DCCC reticulum | Reflector, Speculum, ornatum interioris-exterioris foredificationis |
| HL (Hair Line) | 0.4mm~3.0mm | Consummatum est continua perpolitio linearis | Architecturae causa, escalators, coquina vehiculis |
Compositio chemica
| Gradus | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-1500 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-1500 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-1500 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Other | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Weinvolvere products immaculatam chalybem cum anti-ferrugine charta et anulis ferreis ad impediendum damnum.
Lepidium sativum pittacii tagged secundum normas specificas seu instructiones emptorum.
Specialis sarcina praesto est sicut per mos postulatum.
Diver Coil Package
Diver Sheet / Diver Tab Package
Diver velit sarcina
Shipment Package
Societas nostra in Wuxi fundata est, civitas industriae immaculatae ferro in Sinis congregata.
Nos speciales in globis immaculatis, schedae et laminae, tibiae ferreae immaculatae et caerimoniae, fistulae ferreae immaculatae, necnon aluminium productorum et aes.
Producta nostra magnopere laudantur a clientibus nostris ab Europa, America, Medio Oriente, Africa et Asia Australi. Competiales uberes et comprehensivam servitutem clientibus offeremus.
Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F; 440, 440c;
Alloy Grade : Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Casio Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In forma : Bars rotundus, Quadratus Bars, Hexagonales Bars, Flat Bars, Angli, Canales, Profiles, Fila, Filum Virgae, Plastae, Plates, Inconsutiles Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: Quid est immaculatum?
A: Immaculata significat nullas notas in superficie ferri, vel speciem ferri, quae aere vel aqua non laeditur, nec colorem mutat, immaculatum, tinguere, rubiginem, corrosivum chemicorum effectum renitentem.
Q2: Nihilne rubiginem immaculatam vult?
A: Imo, immaculatum significat haud facile maculatum vel ferrugineum acquirere, specialem facultatem habet maculam, rubiginem et corrosionem resistendi.
Q3: Tu laminas ferro intemerata copia?
A: Imo varias schedas chalybis immaculatas varias suppeditamus, amplitudines ab 0.3-3.0mm. et in diversis finit.
Q4: Recipis caesum tandem obsequium?
A: Scilicet, satisfactio elit summo prioritate nostra est.
Q5: Si parvum ordinem habeo, accipis ordinem parvum?
A: Non problema, sollicitudine nostra cura est, parvae quantitates accipiuntur.
Q6: Quomodo praestas productum qualitas tua?
A: Primo, ab ipso exordio, iam animum ad effectum adduximus, id est qualitas vitae, professionales operarii et baculi singulos gradus sequentur, donec bona bene referta et exsequantur.
Q7: Vis products stipant?
A: Professionales homines faciunt sarcinas professionales, habemus varias rationes ad libitum stipendii clientium, oeconomicum unum vel melius.
Q8: Quid opus est scire de elit ante accuratam sententiam?
A: Accurate sententia, scire oportet gradum, crassitudinem, magnitudinem, metam superficiem, colorem et quantitatem ordinis tui, necnon destinationem bonorum. Producti customised plus opus erit, sicut tractus, layout et ratio. Tunc offeremus competitive auctoritatem cum informatione supra.
Q9: Qualem mercedem term tibi accpet?
A: Accipimus T/T, occidentalem unionem, L/C.
Q10: Si parvus ordo est, bona agenti trades?
A: Ita nati sumus ut problemata nostrorum clientium solvenda, bona incolumiter agentis horreis obtinebimus et picturas tibi mittemus.
Q11: Tu modo plana facere? Volo fabricare pro meo novo incepto.
A: Imo, maxime nos immaculatam ferro superficiem curationis planae producemus, simulque producti metalli nativus confecti sicut per mos tractus et consilium fabricamus, technicus noster de ceteris curabit.
Q12: quot coutries iam emitur?
A: exportatum in plus quam 50 terris maxime ex America, Russia, UK, Cuvaitum, Aegypto, Irania;
Turkey, Jordan, etc.
Q13: quomodo possum aliqua exempla?
A: Parva exempla in copia et exempla gratis praebere possunt. Catalla praesto est, maxime
exemplaria parata habemus exemplaria in stock. Exempla nativus fere 5-7days erit.
Q14: Quid est traditio?
A: Sample ordinis partus dies est 5. 7 dierum. Continens ordines sunt circiter dies 15-20.
Q15: Quid est application circa te Products?
A: 1.elevator portae/cabin vel et maceria latera escalatoris.
2.Wall cladding intra vel extra conventum locus / popina.
3.Facade, cum aliquid colliditur, ut columnae in lobby.
4.Ceiling in macellum. 5. Decorative in quibusdam locis delectationis trahit.
Q16: Quousque spondes pro hoc Product / Perfice?
A: Color spondet plus quam 10 annos. Originale materiae qualis certificatorium can
praeberi.
