Monel Alloy 400
Brevis descriptio:
Monel 400est a *nickel-aeris offensionis(circiter 67% Ni – 23% Cu) hoc est aquae marinae et vaporis in calidis temperaturis necnon in solutionibus salis et causticis.Admisce 400solida est solutio mixturae quae modo frigore laborat durabilis. Hoc nickel stannum exhibet proprietates sicut repugnantiam bonam corrosionem, bonam weldability et altam fortitudinem. Rate corrosio gravis in aqua salacissima vel marinis rapide fluens cum optima repugnantia ad corrosionem rimas in aquis fluvialibus componendis, eiusque resistentia ad varias condiciones corrosivae perducit ad late usum in applicationibus marinis et aliis solutionibus chloridi non-oxidizationis. Hoc nickel mixtura maxime repugnant acida hydrochlorica et hydrofluorica cum de-aerata sunt. Cum ex alto aeneo expectandum esset, mixtura 400 acido nitrico et ammoniaci systemata celeriter oppugnatur.
Monel 400 habet magnas proprietates mechanicas in subzero temperaturis, adhiberi potest in temperaturis usque ad 1000° F, et punctum liquefactum est 2370-2460° F. Attamen mixtura 400 est humilis in viribus in anneato statu, varietas irarum. ad vires augendas adhiberi potest.
Formae Available
- Sheet
- Plate
- Bar
- Pipe & tube (iuncta & seamless)
- Rixas (i. e. flanges, lapsus, excaecant, cervices, sindones, collum longum glutino, nervum welds, cubiti, tees, stipulae, reditus, pilei, cruces, reduceres, et tibiae papillae)
- Filum
Quae sunt notae Monel 400?
- Repugnans marinis et vapore ad altum temperaturis
- Praeclara resistentia ad potat aquam vel marinis velociter fluit
- Praeclara resistentia accentus corrosio crepuit in aquis fluviis maxime
- Praecipue repugnant acida hydrochlorica et hydrofluorica cum de-aerated
- Repugnantiam aliquam praebet acidis hydrochloricis et sulphuricis in temperaturis et concentrationibus modicis, sed raro materiam electionis pro his acida.
- Praeclara resistentia neutri et sal alcalini
- Resistentia ad chloride adductus accentus corrosio crepuit
- Bonae proprietates mechanicae ab sub-nulla temperaturis usque ad 1020° F
- Alcali resistentia
Chemical Compositio, %
| C | Mn | S | Si | Ni | Cu | Fe |
|---|---|---|---|---|---|---|
| .30 max | 2.00 max | .024 max | .50 max | 63.0 min | 28.0-34.0 | 2.50 max |
Corrosio resistens Monel 400
Admisce 400virtualiter immunis est a accentus corrosio chloridi ion crepuit in ambitus typicos. Fere, eius corrosio resistentia valde bona est in ambitus redigendo, at pauper in condicionibus oxidizing. In acida oxidizationis non est utilis, ut acidum nitricum et nitrosum. Nihilominus renititur maxime alkalis, salibus, aquis, alimentis, substantiis organicis et conditionibus atmosphaericis in temperaturis normalibus et elevatis.
Hoc stannum nickel impugnatur in vaporibus sulphureis supra circiter DCC° F et sulphur fusile ad temperaturae mixturam supra circiter 500° F impugnatur.
Monel 400 circa eandem corrosionem resistentiae ac nickel praebet, sed cum altioribus maximis pressionibus et temperaturis laborantibus et in minori dispendio propter superiorem facultatem machinandi.
In quibus applicationibus Monel 400 usus est?
- Marine engineering
- Processus chemica et hydrocarbon armorum
- Gasoline et aquae dulcis obterere
- Rudis PETROLEUM stills
- De-aerating calentium
- Boiler pascere aquam calentium et aliorum calorum nummulariorum
- Valvulae, soleatus, hastilia, caerimoniae et fasteners
- Caloris industrialis nummulariorum
- chlorinated menstrua
- Oleum crudum distillationis turrium
Fabricatio cum Monel 400
Admiscere 400 arcum gas-tungsten facile conflari potest, arcus gas metallicus vel processus arcus metalli munitus utentibus metallis filler congruis. Non est opus post contractionem caloris firmandam, sed purgatio post glutino critica est ad optimam corrosionem resistendam, alioquin periculum est contaminationis et embrittlement.
Ficta perfecta ad amplis proprietatibus mechanicis produci possunt, cum propria moderatio moles calidi aut frigoris operandi et selectio opportuna curationum thermarum fiat.
Sicut pleraque alia nickel admixtus, Monel 400 proprie est ad machinam lenta et obdurabit. Praeclari eventus tamen e obtineri possunt si rectas electiones instrumentorum ac machinarum efficias.
Materia Gradus
| Materia | ASTM A240 Standard | 316. 316. 316. 316. 317. 321. 321. 321H 347*347H 409 410 410S 430 904L. |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367; N08810, N08904,N08926; S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S3225, S3220, S3225, S3250 S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7L, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| perago | Crassitudo | Characteres | Applications |
| No. 1 | 3.0mm~50.0mm | Consummatum calidum volubilem, furnum et salsum, distinctum est superficies alba CONDITANEUS | Industriae chemicae apparatum, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Curatio caloris completa, post volvens frigus servantur, sequitur cutis transeunt linea ut clarior et lenior sit | General Application Instrumenta Medica, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Splendida calor curatio post frigus volubilem | Culina, vas coquina, propositum architecturae |
| No. 4 | 0.4mm~3.0mm | Polonica cum No. 150 ad No.180 reticulum abrasives. Maxime popularibus finiatur | Lac & Cibus facilities expediendi, Hospitalis Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | Speculum quasi reflective superficies poliendo subtilioribus abrasives super DCCC reticulum | Reflector, Speculum, ornatum interioris-exterioris foredificationis |
| HL (Hair Line) | 0.4mm~3.0mm | Consummatum est continua perpolitio linearis | Architecturae causa, escalators, coquina vehiculis |
Compositio chemica
| Gradus | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-1500 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-1500 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-1500 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Other | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Weinvolvere products immaculatam chalybem cum anti-ferrugine charta et anulis ferreis ad impediendum damnum.
Lepidium sativum pittacii tagged secundum normas specificas seu instructiones emptorum.
Specialis sarcina praesto est sicut per mos postulatum.
Diver Coil Package
Diver Sheet / Diver Tab Package
Diver velit sarcina
Shipment Package
Societas nostra in Wuxi fundata est, civitas industriae immaculatae ferro in Sinis congregata.
Nos speciales in globis immaculatis, schedae et laminae, tibiae ferreae immaculatae et caerimoniae, fistulae ferreae immaculatae, necnon aluminium productorum et aes.
Producta nostra magnopere laudantur a clientibus nostris ab Europa, America, Medio Oriente, Africa et Asia Australi. Competiales uberes et comprehensivam servitutem clientibus offeremus.
Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F; 440, 440c;
Alloy Grade : Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Casio Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In forma : Bars rotundus, Quadratus Bars, Hexagonales Bars, Flat Bars, Angli, Canales, Profiles, Fila, Filum Virgae, Plastae, Plates, Inconsutiles Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: Quid est immaculatum?
A: Immaculata significat nullas notas in superficie ferri, vel speciem ferri, quae aere vel aqua non laeditur, nec colorem mutat, immaculatum, tinguere, rubiginem, corrosivum chemicorum effectum renitentem.
Q2: Nihilne rubiginem immaculatam vult?
A: Imo, immaculatum significat haud facile maculatum vel ferrugineum acquirere, specialem facultatem habet maculam, rubiginem et corrosionem resistendi.
Q3: Tu laminas ferro intemerata copia?
A: Imo varias schedas chalybis immaculatas varias suppeditamus, amplitudines ab 0.3-3.0mm. et in diversis finit.
Q4: Recipis caesum tandem obsequium?
A: Scilicet, satisfactio elit summo prioritate nostra est.
Q5: Si parvum ordinem habeo, accipis ordinem parvum?
A: Non problema, sollicitudine nostra cura est, parvae quantitates accipiuntur.
Q6: Quomodo praestas productum qualitas tua?
A: Primo, ab ipso exordio, iam animum ad effectum adduximus, id est qualitas vitae, professionales operarii et baculi singulos gradus sequentur, donec bona bene referta et exsequantur.
Q7: Vis products stipant?
A: Professionales homines faciunt sarcinas professionales, habemus varias rationes ad libitum stipendii clientium, oeconomicum unum vel melius.
Q8: Quid opus est scire de elit ante accuratam sententiam?
A: Accurate sententia, scire oportet gradum, crassitudinem, magnitudinem, metam superficiem, colorem et quantitatem ordinis tui, necnon destinationem bonorum. Producti customised plus opus erit, sicut tractus, layout et ratio. Tunc offeremus competitive auctoritatem cum informatione supra.
Q9: Qualem mercedem term tibi accpet?
A: Accipimus T/T, occidentalem unionem, L/C.
Q10: Si parvus ordo est, bona agenti trades?
A: Ita nati sumus ut problemata nostrorum clientium solvenda, bona incolumiter agentis horreis obtinebimus et picturas tibi mittemus.
Q11: Tu modo plana facere? Volo fabricare pro meo novo incepto.
A: Imo, maxime nos immaculatam ferro superficiem curationis planae producemus, simulque producti metalli nativus confecti sicut per mos tractus et consilium fabricamus, technicus noster de ceteris curabit.
Q12: quot coutries iam emitur?
A: exportatum in plus quam 50 terris maxime ex America, Russia, UK, Cuvaitum, Aegypto, Irania;
Turkey, Jordan, etc.
Q13: quomodo possum aliqua exempla?
A: Parva exempla in copia et exempla gratis praebere possunt. Catalla praesto est, maxime
exemplaria parata habemus exemplaria in stock. Exempla nativus fere 5-7days erit.
Q14: Quid est traditio?
A: Sample ordinis partus dies est 5. 7 dierum. Continens ordines sunt circiter dies 15-20.
Q15: Quid est application circa te Products?
A: 1.elevator portae/cabin vel et maceria latera escalatoris.
2.Wall cladding intra vel extra conventum locus / popina.
3.Facade, cum aliquid colliditur, ut columnae in lobby.
4.Ceiling in macellum. 5. Decorative in quibusdam locis delectationis trahit.
Q16: Quousque spondes pro hoc Product / Perfice?
A: Color spondet plus quam 10 annos. Originale materiae qualis certificatorium can
praeberi.
