304L Steel Sheet
Brevis descriptio:
Aequivalent Grades Steel CDXXX rudentis & Plates:
| VEXILLUM | WERKSTOFF NR. | UNS |
| SS 430 | 1.4016 | S43000 |
SS 430Plagulae, Plates chemicae Compositio et proprietatibus Mechanica;
| Gradus | C | Mn | Si | P | S | Cr | Ni | Mo |
| SS 430 | 0.12 max | 1.0 max | 1.0 max | 0.003 max | 0.030 max | 16.0 – 18.0 | 0.75 | - |
| distrahentes Fortitudo | Cedant fortitudo (0.2% Offset) | Prolongatio (in 2 in.) |
| MPa - 450 | MPa – 205 | 22 % |
Quid elige nobis:
1. Materiam perfectam consequi potes secundum exigentiam tuam saltem pretio possibili.
2. Munera praeterea, FOB, CFR, CIF, et ostia ostiatim pretia partus offerunt. Monemus te facere negotia navigia quae admodum frugi erunt.
3. Materiae quae praebemus sunt omnino verifiabiles, a materia testi rudimento usque ad ultimam propositionem dimensionalem.
4. e spondere responsionem dare intra 24hours (solent eadem hora)
5. Alternationes stirpis colligere potes, molendinum deliberatio cum temporis fabricandi extenuando.
6. Plene nostris clientibus dedicati sumus. Si postulatis tuis occurrere non poterit, omnibus perspectis optionibus, non te decipiemus fictis promissis, quae bonas relationes emptoris efficient.
Quality Assurance (including both Destructive and Non-Destructive) :
1. Visual Dimension Test
2. Mechanica examinatio distrahendi, longitudinis et reductionis regionis.
3. Impact analysis
4. Chemical examen analysis
5. duritia test
6. Pitting praesidium test
7. Penetrant Test
8. Corrosio intergranuaria Testis
9. Roughness Testis
10. Metallographia Experimentalis Test
Packaging:
1. Sarcina est satis magni momenti praesertim in casu portationis internationalis in quo datio per varios vias ad ultimum destinatum perveniat, specialem curam de packaging ita ponimus.
2. Saky Ferri sarcinam bonorum nostrorum multipliciter ex fructibus innititur. Productos nostros multipliciter compingimus, ut:
Superficies finit pro Flat Products ex EN 10088-2 (indicem plenum videre Specifying finit pro immaculato ferro plana producta (sheet)
| Superficiem Conclusio | Definition | Applicationem |
| 2B | Quibus confectis, post volvendum frigus, per curationem caloris, salsura vel alia adaequata curationem, postremo per volvendum frigus, ut congruum splendorem praebeat. | Instrumentum medicinae, Cibus industriam, Materia constructio, vasa coquinaria. |
| BA | Curatio illae processit cum calore claro post frigus volubilem. | Culina, Vasa Electric, Aedificium constructione. |
| NO.3 | Qui perfecti sunt expolitio cum No.100 ad No.120 abrasives de quibus in JIS R6001. | Utensilia coquinae, aedificiorum constructio. |
| NO.4 | Qui perfecti sunt expolitio cum No.150 ad No.180 abrasives de quibus in JIS R6001. | Utensilia coquina, fabricam fabricam, apparatum medicinalem. |
| HL | Qui perfecti poliuntur ita ut stricturas continuas expoliant utendo laesura congrui grani magnitudine. | Building Construction. |
| NO.1 | Superficies per curationem caloris confecta et servantur vel processibus ibi respondentibus post volubilem calidum. | Chemical tank |
Materia Gradus
| Materia | ASTM A240 Standard | 316. 316. 316. 316. 317. 321. 321. 321H 347*347H 409 410 410S 430 904L. |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367; N08810, N08904,N08926; S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S3225, S3220, S3225, S3250 S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7L, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| perago | Crassitudo | Characteres | Applications |
| No. 1 | 3.0mm~50.0mm | Consummatum calidum volubilem, furnum et salsum, distinctum est superficies alba CONDITANEUS | Industriae chemicae apparatum, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Curatio caloris completa, post volvens frigus servantur, sequitur cutis transeunt linea ut clarior et lenior sit | General Application Instrumenta Medica, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Splendida calor curatio post frigus volubilem | Culina, vas coquina, propositum architecturae |
| No. 4 | 0.4mm~3.0mm | Polonica cum No. 150 ad No.180 reticulum abrasives. Maxime popularibus finiatur | Lac & Cibus facilities expediendi, Hospitalis Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | Speculum quasi reflective superficies poliendo subtilioribus abrasives super DCCC reticulum | Reflector, Speculum, ornatum interioris-exterioris foredificationis |
| HL (Hair Line) | 0.4mm~3.0mm | Consummatum est continua perpolitio linearis | Architecturae causa, escalators, coquina vehiculis |
Compositio chemica
| Gradus | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-1500 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-1500 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-1500 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Other | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Weinvolvere products immaculatam chalybem cum anti-ferrugine charta et anulis ferreis ad impediendum damnum.
Lepidium sativum pittacii tagged secundum normas specificas seu instructiones emptorum.
Specialis sarcina praesto est sicut per mos postulatum.
Diver Coil Package
Diver Sheet / Diver Tab Package
Diver velit sarcina
Shipment Package
Societas nostra in Wuxi fundata est, civitas industriae immaculatae ferro in Sinis congregata.
Nos speciales in globis immaculatis, schedae et laminae, tibiae ferreae immaculatae et caerimoniae, fistulae ferreae immaculatae, necnon aluminium productorum et aes.
Producta nostra magnopere laudantur a clientibus nostris ab Europa, America, Medio Oriente, Africa et Asia Australi. Competiales uberes et comprehensivam servitutem clientibus offeremus.
Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F; 440, 440c;
Alloy Grade : Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Casio Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In forma : Bars rotundus, Quadratus Bars, Hexagonales Bars, Flat Bars, Angli, Canales, Profiles, Fila, Filum Virgae, Plastae, Plates, Inconsutiles Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: Quid est immaculatum?
A: Immaculata significat nullas notas in superficie ferri, vel speciem ferri, quae aere vel aqua non laeditur, nec colorem mutat, immaculatum, tinguere, rubiginem, corrosivum chemicorum effectum renitentem.
Q2: Nihilne rubiginem immaculatam vult?
A: Imo, immaculatum significat haud facile maculatum vel ferrugineum acquirere, specialem facultatem habet maculam, rubiginem et corrosionem resistendi.
Q3: Tu laminas ferro intemerata copia?
A: Imo varias schedas chalybis immaculatas varias suppeditamus, amplitudines ab 0.3-3.0mm. et in diversis finit.
Q4: Recipis caesum tandem obsequium?
A: Scilicet, satisfactio elit summo prioritate nostra est.
Q5: Si parvum ordinem habeo, accipis ordinem parvum?
A: Non problema, sollicitudine nostra cura est, parvae quantitates accipiuntur.
Q6: Quomodo praestas productum qualitas tua?
A: Primo, ab ipso exordio, iam animum ad effectum adduximus, id est qualitas vitae, professionales operarii et baculi singulos gradus sequentur, donec bona bene referta et e vitando exsequantur.
Q7: Vis products stipant?
A: Professionales homines faciunt sarcinas professionales, habemus varias rationes ad libitum stipendii clientium, oeconomicum unum vel melius.
Q8: Quid opus est scire de elit ante accuratam sententiam?
A: Accurate sententia, scire oportet gradum, crassitudinem, magnitudinem, metam superficiem, colorem et quantitatem ordinis tui, necnon destinationem bonorum. Producti customised plus opus erit, sicut tractus, layout et ratio. Tunc offeremus competitive auctoritatem cum informatione supra.
Q9: Qualem mercedem term tibi accpet?
A: Accipimus T/T, occidentalem unionem, L/C.
Q10: Si parvus ordo est, bona agenti trades?
A: Ita nati sumus ut problemata nostrorum clientium solvenda, bona incolumiter agentis horreis obtinebimus et picturas tibi mittemus.
Q11: Tu modo plana facere? Volo fabricare pro meo novo incepto.
A: Imo, maxime nos immaculatam ferro superficiem curationis planae producemus, simulque producti metalli nativus confecti sicut per mos tractus et consilium fabricamus, technicus noster de ceteris curabit.
Q12: quot coutries iam emitur?
A: exportatum in plus quam 50 terris maxime ex America, Russia, UK, Cuvaitum, Aegypto, Irania;
Turkey, Jordan, etc.
Q13: quomodo possum aliqua exempla?
A: Parva exempla in copia et exempla gratis praebere possunt. Catalla praesto est, maxime
exemplaria parata habemus exemplaria in stock. Exempla nativus fere 5-7days erit.
Q14: Quid est traditio?
A: Sample ordinis partus dies est 5. 7 dierum. Continens ordines sunt circiter dies 15-20.
Q15: Quid est application circa te Products?
A: 1.elevator portae/cabin vel et maceria latera escalatoris.
2.Wall cladding intra vel extra conventum locus / popina.
3.Facade, cum aliquid colliditur, ut columnae in lobby.
4.Ceiling in macellum. 5. Decorative in quibusdam locis delectationis trahit.
Q16: Quousque spondes pro hoc Product / Perfice?
A: Color spondet plus quam 10 annos. Originale materiae qualis certificatorium can
praeberi.
