TP347H Nerjaveèi asye tiyo san pwoblèm diferan ak TP347 Nerjaveèi asye tiyo san pwoblèm.
Kondisyon diferan sa yo bay pi wo fòs ranpe-rupture pase nòmalman ka reyalize nan klas menm jan an san kondisyon sa yo diferan. Klas TP347HFG Nerjaveèi asye tiyo san pwoblèm yo dwe frèt fini.
TP347H Nerjaveèi asye tiyo san pwoblèm dwe rechofe nan tanperati tretman solisyon espesifye pou tan ki nesesè anvan asouvisman.
Tiyo ASTM A213 TP347H yo lajman ki itilize nan endistri lwil oliv ak chimik, teknoloji nikleyè, ak endistri chodyè.
Nou bay ak fabrike TP347H asye pur tiyo san pwoblèm ak yon pakèt gwosè, ki soti nan 10.0mm a 1219mm. Epesè miray TP347H san pwoblèm tiyo asye pur varye ant 0.5mm ak 100mm. Longè komen chak tiyo se 5.8m, 6.0m, 11.8m, 12m.
Longè maksimòm nou pwodwi se jiska 18m. Sheye Metal ka pwodwi TP347H tiyo asye pur an akò strik ak ASTM, EN, JIS, DIN estanda satisfè kondisyon diferan kliyan an.
Tiyo ASME SA213 TP347H se pwodwi ki pi komen. TP347H Nerjaveèi tiyo san pwoblèm ka koupe nan gwosè ak tiyo ak fini poli li disponib tou.
Yon anpil nan sèvis pwosesis, ki gen ladan pwensonaj, penti, bizote, chanfreinaj yo tout disponib pou nou. Avèk b fòs teknik, ekipman avanse ak atizan konn fè,
Wuxi Cepheus ka fabrike tiyo TP347H ak bon kalite. Pou metal, nou serye.
| Spesifikasyon | |
| Gwosè | OD: 10.0 ~ 1219mm; WT: 0.5 ~ 100mm; Longè: 5.8m, 6m, 11.8m, 12m, Max.18m |
| Pwosesis | San pwoblèm, frèt trase, frèt woule, cho woule |
| Diferan non | 1.4961 san pwoblèm tiyo asye pur X8CrNiNb16-13 san pwoblèm tiyo asye pur UNS S34709 Tiyo asye pur san pwoblèm TP347H Nerjaveèi asye Chodyè Tib TP347H Nerjaveèi Super aparèy chofaj Tib |
| Fen | PE (Plain Fen), BE (Bizote Fen), NPT, BW (But Weld Fen) |
| Sifas | Èd marinated, polisaj, bwose, marinated gratis nan echèl. Lè yo itilize recuit klere, marinated pa nesesè. |
| Estanda | ASTM A312, ASTM A213, EN10216-5, DIN 17456, DIN 17458, JIS G3459, JIS G3463 |
| Pwa teyorik (kg/m) | Pwa/mèt = (OD-WT)*WT*0.02507Tou deODepiWTnan mm. |
Nòt:
OD se dyamèt deyò espesifye.
WT se epesè miray espesifye
Tiyo asye pur yo dwe marinated san echèl. Lè yo itilize recuit klere, marinated pa nesesè.
Yo pral founi pwent plenn koupe ak ebavure. Si yo vle pwent file oswa pwent bizote pou soude, bay detay.
Konpozisyon chimik
| Klas | Deziyasyon UNS | C,% (Max) | Mn,% Max | P,% Max | S,% Max | Si,% Max | Cr,% | Ni,% | N,% Max |
| TP347 | S34700 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-20.0 | 9.0-13.0 | 10xC-1.10 |
| TP347H | S34709 | 0.04-0.10 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-19.0 | 9.0-13.0 | 8xC-1.10 |
| TP347HFG | S34710 | 0.06-0.10 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-19.0 | 9.0-13.0 | 8xC-1.10 |
Kondisyon pou tretman chalè
| Klas | Deziyasyon UNS | Kalite tretman chalè | Austenitizing / Tanperati solisyon, min oswa ranje ℃ | Medya refwadisman |
| TP347 | S34700 | Tretman solisyon | 1040 | Dlo oswa lòt Rapid Cool |
| TP347H | S34709 | Tretman solisyon | Fwad travay:1100; Woule cho: 1050 | Dlo oswa lòt Rapid Cool |
| TP347HFG | S34710 | Tretman solisyon | 1175 | Dlo oswa lòt Rapid Cool |
Pwopriyete mekanik
| Klas | Deziyasyon UNS | Fòs rupture Mnan, MPa | Sede fòs, min, MPa | Elongasyon nan 2 pous oswa 50mm, min, % | Dite, Max | |
| Brinell/Vickers | Rockwell | |||||
| TP347 | S34700 | 515 | 205 | 35 | 192HBW/200HV | 90HRB |
| TP347H | S34709 | 515 | 205 | 35 | 192HBW/200HV | 90HRB |
| TP347HFG | S34710 | 550 | 205 | 35 | 192HBW/200HV | 90HRB |
ASME SA213 TP47H Nerjaveèi asye san pwoblèm tiyo tolerans
Tolerans nan epesè miray la
| Tolerans nan epesè miray laA | ||||||||
| Dyamèt deyò mm | 2.4mm ak anba | Plis pase 2.4mm a 3.8mm, enkli. | Plis pase 3.8mm a 4.6mm, enkli. | Plis pase 4.6mm | ||||
| Plis pase | Anba | Plis pase | Anba | Plis pase | Anba | Plis pase | Anba | |
| San pwoblèm, cho-fini tiyo | ||||||||
| 100mm ak anba | 40 | 0 | 35 | 0 | 33 | 0 | 28 | 0 |
| Plis pase 100mm | … | … | 35 | 0 | 33 | 0 | 28 | 0 |
| Seamless, frèt-fini tiyo | ||||||||
| Plis pase | Anba | |||||||
| 38.1mm ak anba | 20 | 0 | ||||||
| Plis pase 38.1mm | 22 | 0 | ||||||
| Tiyo soude | ||||||||
| Tout Gwosè | 18 | 0 | ||||||
Tolerans nan dyamèt deyò
| Espesifye dyamèt deyò, mm | Tolerans, mm | |
| Plis pase | Anba | |
| Cho-fini tiyo san pwoblèm | ||
| 100 oswa anba | 0.4 | 0.8 |
| Plis pase 100 a 200.Inkl. | 0.4 | 1.2 |
| Plis pase 200 a 225, incl. | 0.4 | 1.6 |
| Tiyo soude ak frèt-fini tiyo san pwoblèm | ||
| Anba 25 | 0.1 | 0.11 |
| 25 a 40, enkli. | 0.15 | 0.15 |
| Plis pase 40 a 50, ekskl. | 0.2 | 0.2 |
| 50 a 65, ekskl. | 0.25 | 0.25 |
| 65 a 75, ekskl. | 0.3 | 0.3 |
| 75 a 100, enkli. | 0.38 | 0.38 |
| Plis pase 100 a 200, enkli. | 0.38 | 0.64 |
| Plis pase 200 a 225, incl. | 0.38 | 1.14 |
Tolerans nan longè
| Metòd fabrikasyon | Espesifye dyamèt deyò, mm | Koupe Longè, mm | |
| Plis pase | Anba | ||
| San pwoblèm, cho-fini | Tout gwosè | 5 | 0 |
| San pwoblèm, frèt-fini | Anba 50.8 | 3 | 0 |
| Soude | 50.8 oswa plis | 5 | 0 |
| Anba 50.8 | 3 | 0 | |
| 50.8 oswa plis | 5 | 0 | |
Tès TP347/H/HFG Nerjaveèi asye tiyo san pwoblèm
1.Chemical analiz
2.Mechanical Pwopriyete
2.1 Egzijans Tensile
2.2 Egzijans dite
2.3 Tès plat
2.4Tès Flaring
3.Tès Hydrostatic oswa Tès elektrik Nondestructive
Lis Pi gwo Etablisman Tès
| Non. | Non Ekipman | Espesifikasyon prensipal yo | Presizyon |
| 1 | HF Enfrawouj kabòn-souf Analyzer HIR-944B | C: 0.0001% -10.0000%; S: 0.0001-0.3500% | 0.1ppmm |
| 2 | Vizib-enfrawouj Spectrometer HC-2 | 330-820 | ± 2nm |
| 3 | Azòt Oksijèn Analyzer EMGA-620W | O: 0-0.1wt%; N: 0-0.5wt% | ≤1.0ppm |
| 4 | Spectrometer lekti dirèk SPECTRO MAXx06 | C, Si, Mn, P, S, Cr, Mo, Ni, Al, Co, Cu, Nb, Ti, V, W, Pb, Sn, Mg, As, Zr, Bi, Ca, Ce, Sb, Se, Ta, Te, B, Zn, La, N, Fe | 0.001% |
| 5 | OBLF Spectrometer GS1000 pou lekti dirèk | Ti, V, C, P, S, Cu, Sn, Cr, Mn, Ni, Mo, Ko, B, W, Nb, Al, Si | 0.001% |
| 6 | Spektromèt pòtatif pou lekti dirèk XSORT | Ti, V, Cu, Sn, Cr, Mn, Ni, Mo, Pb, Co, W, Zn, Nb, … | - |
| 7 | Idwolik Tester Inivèsèl WE-600C | 0-600KN | Klas 1.0 |
| 8 | Microcomputer idwolik inivèsèl tès machin CHT-4605 | 0-600KN | Klas 1.0 |
| 9 | Enpak machin tès JB-300B/ JB-W300B | 0-300KN (min -196 ℃) | 2J ±0.1℃ |
| 10 | Leeb dite tèsteur TH-160 TH110 | 0-1045HL | ± 1HL |
| 11 | Mikwo Vickers MHV-1000 | (200-300) HV0.05; (400-500) HV0.1; (700-800)HV0.2; (700-800) HV0.5 HV1 | ± 5.0%; ± 4.0%; ± 4.0%; ± 3.0%; ± 3.0%; |
| 12 | Low chaj Vickers dite tèsteur HV-10A | 49.03-980N | – |
| 13 | Brinell dite tèsteur HB-3000B-1 | 8-650HBW | – |
| 14 | Rockwell Hardness Tester HR-150A-I | 20-88HRA; 20-100HRB; 20-70HRC | 0.5 |
| 15 | Metalografi analiz 4XC; PXS-1020 | 50X-1000X; 10X/20X | – |
| 16 | Men ki te kenbe Rugosité mèt TR210 | ≤160μm | ± 10% |
| 17 | Beny dlo HH-501 | RT-100℃ | ± 0.5℃ |
| 18 | 16 Chèn ultrasons tès machin CTB-108, X2 | φ120-830mm | C5 |
| 19 | 8 Chèn ultrasons tès machin CTB-108 | φ14-114mm | C5 |
| 20 | Double chanèl ultrasons tès machin CUT-2A | 0-100db | 1db |
| 21 | Tès à machin CTS-23/CTB106/CUT512G | φ89-508mm; φ14-114mm; 0-100db | C5; C5; 1db |
| 22 | Detektè defo aktyèl Eddy ECT-308;ECT-306E;IDEA-4D; G-8B; ET-910B | φ10-89mm, φ89-168mm; φ219-1200mm; 10-10MHz, 0-99db; 14-114 | A; -; A; A; A |
| 23 | Hydrostatique Tès Machineφ10-133mm; φ133-610mm; φ630-1500mm | 30MPa; 30MPa; 50MPa; | – |
| 24 | X-ray Detektè XY2515; HK320; XYD225 | WT≤50mm; WT≤50mm; WT≤20mm; | – |
| 25 | X-ray Videyo Detektè XYD225 | WT≤8mm | – |
| 26 | Detektè defo ultrasons (soude) SPUT | Od: 168-1200mm; WT: 3-40MM; L:4-12.5m | – |
Pwojè referans konsènan
| Kliyan yo | Non Pwojè a | Espesifikasyon |
| Donfang chodyè gwoup co, Ltd | – | ASME SA213 TP347H Tiyo 63.5 * 5.5mm, 76 * 4.5mm, 51 * 8mm, 60 * 8.5mm, 50.8 * 9mm, 45 * 8.5mm, 57 * 4.5mm, 60 * 4mm, 48 * 7.5mm, 50.5mm. ASME SA213 TP347H Tiyo 45 * 8.09mm, 45 * 9.2mm, 50.8 * 3.5mm, 50.8 * 9.2mm |
| Shanghai Boiler Works Ltd | – | JWBX/SG-X001-2010 TP347H Tiyo 41.3 * 8.5mm, 47.6 * 7.5mm, 63.5 * 5.5mm, 48 * 7.5mm, 51 * 4mm, 57.2 * 9mm, 18 * 8mm, 60 * 9mm 1106MT |
| Harbin Boiler Company Limited | 300MW, 600MW Power Station Asanblaj Inite | ASME SA213 TP347H Tiyo 22 * 4mm, 54 * 9mm, 57 * 9mm, 63 * 4mm |
| Babcock & Wilcox Beijing Company Ltd | – | ASTM A213 TP347H Tiyo 16 * 3mm, 52 * 7mm, 57 * 5mm, 44.5 * 8mm, 51 * 8.5mm, 60 * 5mm |
| Konpayi SINOPEC Maoming | 1800000 tòn/ane sir lwil oliv idwojèn chalè wo-presyon chodyè tib | ASTM A213 TP347H Tiyo 168.3 * 12 * 9000mm |
| Petrochina Karamay Petrochemical Company | 1200000Tons/ane Inite idwojènasyon lwil oliv Diesel | ASTM A213 TP347 Pipe193.7 * 14.27mm, 168.3 * 12.7mm |
Enfòmasyon sou anbalaj
TP347/H/HFG Nerjaveèi asye tiyo san pwoblèm soti nan Wuxi Cepheus yo chaje selon kondisyon kliyan an. Pou evite nenpòt domaj ki ta ka koze pandan transpò entènasyonal, nou bay kèk metòd anbalaj opsyonèl, ki gen ladan sache trikote, ka plywood, ak bwat an bwa.
Tan poste: Mar-21-2024