Wuxi Cepheus Nerjaveèi se founisè prim ou nan ba plat asye pur.
Nerjaveèi plat ba soti nan Wuxi Cepheus ka divize an twa kalite: SS Hot Rolled Flat Bar; Fwad Drawn SS Flat Bar, plat Nerjaveèi asye koupe nan teren oswa plak.
Cho woule SS plat ba pèmèt yo sèvi ak centerless fanm k'ap pile, polisaj, oswa lòt operasyon ki souvan asosye ak fini frèt yo nan lòd yo bay amelyore tolerans dimansyon oswa kondisyon sifas pou cho woule plat ba.
Pou asye pur plat ba koupe soti nan teren asye pur oswa plak, li toujou gen de sifas ki marinated oswa dekalye, ak de sifas koupe.
Wuxi cepheus toujou bay bar plat nan klas asye plen, tankou 301, 302, 303, 304/L, 304H, 309/S, 310/S, 316/L/Ti, 317/L, 321/H, 347/H. , 409/L, 410, 416, 420, 440C, 430, 431, 2205, 2507, 17-4PH, 17-7PH, 904L.
En fe plat ba a envantè nan 304 ak 316L. Gwosè a nou bay varye ant 0.5 x 1.5 mm ak 200 x 250 mm. Longè estanda nan ba asye pur plat se 5.8m, oswa 6m. Longè maksimòm nou ka bay se 12m. Pou satisfè kondisyon diferan ak espesyal nan men kliyan yo, Nou menm tou nou bay sèvis pwosesis, tankou Flat Nerjaveèi koupe ba, SS plat ba polisaj.
| Spesifikasyon | |
| Gwosè | 0.5 x 1.5 mm ~ 200 x 250mm; Longè: 5.8m, 6m, oswa kòm demann |
| Teknik | Fwad trase, cho woule, SS plat ba koupe nan teren oswa plak, Manje, fòje, Centerless Manje |
| Sifas | marinated, klere, polisaj, glas, cheve, |
| Pwa teyorik (kg/m) | Epesè (mm) x Lajè (m) x Longè (m) x 7.93 |
Klas prensipal yo
| Nerjaveèi asyeFlatBar | |
| 300 seri klas asye pur | 301, 302, 303, 304/L, 304H, 309/S, 310/S, 316/L/Ti, 317/L, 321/H, 347/H |
| 400 seri klas asye pur | 409/L, 410, 416, 420, 440C, 430, 431 |
| Duplex Nerjaveèi Seri | 2205, 2507 |
| Nikèl-bazSeri alyaj | 904L, 17-4PH, 17-7PH, F51, F55, 253MA, 254SMO, Alloy C276, N08367, N08926, Monel400, Inconel625, Inconel718 |
| Estanda | GB/T 1220, 4226, ASTM A276, ASTM A479, ASTM A484, ASTM A582, JIS G4303, EN10088, IS6603 |
Tolerans pou Nerjaveèi frèt trase Flat Bar
| Lajè (mm) | Tolerans lajè nan Nerjaveèi Flat Bar (mm) | Tolerans epesè (mm) | |
| Pou epesè 6.5mm ak anba | Pou epesè plis pase 6.5mm | ||
| 1.50 pou 9.50 | +0.12 ~ -0.12 | +0.12 ~ -0.12 | +0.05 ~ -0.05 |
| 9.50 pou 25.00 | +0.10 ~ -0.10 | +0.10 ~ -0.10 | +0.05 ~ -0.05 |
| 25.00 pou 50.00 | +0.15 ~ -0.15 | +0.10 ~ -0.10 | +0.08 ~ -0.08 |
| 50.00 pou 75.00 | +0.20 ~ -0.20 | +0.10 ~ -0.10 | +0.10 ~ -0.10 |
| 75.00 pou 1150.00 | +0.25 ~ -0.25 | +0.13 ~ -0.13 | +0.12 ~ -0.12 |
Tolerans pou asye pur cho woule plat Bar
| Lajè (mm) | Tolerans lajè (mm) | Tolerans epesè (mm) | |||||
| 3 ~ 12 | 12 ~ 25 | 25 ~ 50 | 50 ~ 100 | 100 ~ 150 | 150 ~ 200 | ||
| 1 ~ 25 | +0.38 ~ -0.38 | +0.20 ~ -0.20 | +0.25 ~ -0.25 | ||||
| 25 ~ 50 | +0.79 ~ -0.79 | +0.30 ~ -0.30 | +0.38 ~ -0.38 | +0.79 ~ -0.79 | |||
| 50 ~ 100 | +1.57 ~ -0.79 | +0.38 ~ -0.38 | +0.51 ~ -0.51 | +0.79 ~ -0.79 | +1.57 ~ -0.79 | ||
| 100 ~ 150 | +2.36 ~ -1.57 | +0.38 ~ -0.38 | +0.51 ~ -0.51 | +0.79 ~ -0.79 | +1.57 ~ -0.79 | +2.36 ~ -1.57 | |
| 150 ~ 200 | +3.18 ~ -3.96 | +0.41 ~ -0.41 | +0.64 ~ -0.64 | +0.79 ~ -0.79 | +1.57 ~ -0.79 | +2.36 ~ -1.57 | +3.18 ~ -3.96 |
| 200 ~ 250 | +3.96 ~ -4.75 | +0.51 ~ -0.51 | +0.79 ~ -0.79 | +0.79 ~ -0.79 | +1.57 ~ -0.79 | +2.36 ~ -1.57 | +3.18 ~ -3.96 |
Enfòmasyon sou anbalaj
Ba plat soti nan Cepheus Nerjaveèi yo chaje selon kondisyon kliyan an. Pou evite nenpòt domaj ki ta ka koze pandan transpò entènasyonal, nou bay kèk metòd anbalaj opsyonèl, ki gen ladan sache trikote, ka plywood, ak bwat an bwa.
Tan poste: Dec-19-2019