Hot Rolled 409L Stainless Steel Sheet 6mm x 1530mm
Short Description:
Ss 431 Plates Stockist , Ss 431 Plate, Astm A240 Tp 431 Plates, Stainless Steel 431 Plate, Stainless Steel 431 Plates, 431 Stainless Steel Plate Supplier , Ss 430 Cold Rolled Plate, Ss 430 High-quality Plates, Ss 430 Cr Plates Exporter, 430 Steel Cr Plates Exporter , Ss 441 Plate Supplier Stainless Steel 441 Plates Stockist
Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates Specifications :
Specifications : ASTM A240 / ASME SA240
Dimensions : ASTM, ASME, and API
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Thickness : 4mm-100mm
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface Finish : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Chemical Composition of Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates :
| Grades | C | Ni | Si | S | Mn | P | Cr | Ti |
| SS 409 | 0.08 | 0.5 | 1.00 | 0.045 | 1.00 | 0.045 | 11.75 -10.5< | 0.75-6x C |
| SS 409L | 0.03 | 0.5 | 1.00 | 0.02 | 1.00 | 0.04 | 11.75-10.5 | 0.75-6(C+N) |
| SS 409M | 0.03 | 1.00 | 0.5-1.5 | 10.80-12.50 | 1.5 max | 0.040 | 0.030 | 0.03 |
| SS 410 | 0.15 max | 0.50 max | 1.00 | 0.030 | 1.00 | 0.040 | 11.5 – 13.5 | – |
| SS 430 | 0.12 | 1.00 | 0.030 | 1.00 | 0.040 | 16.0 18.0 | – | |
| SS 430F | 0.12 | 1.00 | 0.15 | 1.25 | 0.06 | 16.0 18.0 | – | |
| SS 439 | 0.01 | 0.200 | 0.35 | 0.0015 | 0.25 | 0.02 | 17.35 | 0.335 |
| SS 440 | 0.95 1.20 | – | 1.00 | 0.030 | 1.00 | 0.040 | 16.00 18.00 | – |
Mechanical properties for Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates & Sheets :
| Grades | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
| SS 409 | 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % | ||
| SS 409L | 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % | ||
| SS 409M | 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % | ||
| SS 410 | 65 (450) | 30 (205) | 20 | 217 | 96 | ||
| 430 | 450 | 205 | 22 | 89 | 183 | ||
| 430F | 552 typical | 379 typical | 25 typical | – | 262 | ||
| SS 439 | 72.9 | 438 MPa63500 psi | 263 MPa38100 psi | 72.9 | |||
| SS 440 | 95,000 psi | 50,000 psi | 25 % | 175 |
SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates Equivalent Grades :
| Grade | WERKSTOFF NR. | UNS | AFNOR | BS | JIS |
| SS 409 | 1.4512 | S40900 | Z3CT12 | 409 S 19 | SUS 409 |
| SS 409L | 1.4512 | S40903 | – | – | SUS 409L |
| SS 409M | – | S40920 | – | HYFAB 3/12 | SUS 409M |
| SS 410 | 1.4006 | S41000 | – | 410S21 | SUS 410 |
| SS 430 | 1.4016 | S43000 | BF Z 3 CN 19-09 | – | |
| SS 431 | 1.4057 | S43100 | – | BS970 431S29 / 431S29T | SUS 431 |
| SS 439 | 1.4510 | S43035 | – | – | – |
| SS 440 | 1.4125 | S44000 | – | – | – |
Types Of Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plates & Sheets:
| SS 439 HR Sheets | ASTM A240 Grade 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Tread Plate |
| Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Floor Plate | Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Diamond Sheet |
| SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 CR Plate | SS 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 HR Plate |
| BS EN 10088-2 Diamond Stainless Steel 439 Plate | 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Polished Stainless Steel Sheet |
| Cold rolled Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 sheet | Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Hot Rolled plate |
| 2B finish 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel sheet | 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Cut to size plate |
| Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Coils | Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Chequered Plate |
| 2B BA Hairline Mirror finish Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 sheet | Brush Stainless Steel 439 Plate |
| Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Galvanized Sheets | 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Checker Plate |
| ASTM A240 Type 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Perforated Stainless Steel Sheet | 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel 2B Plate |
| AISI 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Plate | 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Cold Rolled Coils |
| 8K Mirror Finish Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet | Stainless Steel 439 Hairline Sheet |
| Bright Annealed WERKSTOFF NR. 1.4845 Sheet | Stainless Steel Sheet ASTM A240 TP310 |
| No.4 Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet | SS UNS S40900 Diamond Plate |
| 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Stainless Steel Durbar Plate | Stainless Steel 439 Rolls Sheets |
| Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Design Sheet | Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Expanded Sheet |
| Stainless Steel 439 Clad Plate | Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Strip |
| Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Shim Sheet | Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Quarto Plate |
| SS WERKSTOFF NR. 1.4841 Polished Plates | Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Perforated Sheet |
| Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Cold Rolled Plates | Austenitic Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet |
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Related Products
- Stainless Steel 202 Flanges
- Stainless Steel 202 Rod/Bar
- Stainless Steel 202 Square Bars
- Stainless Steel 202 Welded Pipes
- Stainless Steel 202 Plates
- Stainless Steel 202 Welded Tubes
- Stainless Steel 202 Flat Bars
- Stainless steel 202 Angles
- Stainless steel 202 fittings
- Stainless Steel 202 Components
- Stainless Steel UNS S30100 Plates, ASTM A240 301 SS Sheets Suppliers
- Stainless Steel 301 Components
- Stainless Steel 303 Flanges
- Stainless Steel 303 Rod/Bars
- Stainless steel 303 Square Bar
- Stainless steel 303 channels
- Stainless steel 303 H Beam
- Stainless steel 303 I Beam
- Stainless steel 303 fittings
- Stainless Steel 303 Hex Bars
- Stainless Steel 303 Components
- Stainless Steel 304 Flanges
- Stainless Steel 304 Rod/Bar
- Stainless Steel 304 Hex Bar
- Stainless Steel 304 Square Bar
- Stainless Steel 304 Seamless Pipes
- Stainless Steel 304 Welded Pipes
- Stainless Steel 304 Plates/Sheet
- Stainless Steel 304 Seamless Tubes
- Stainless Steel 304 Flat Bar
- Stainless Steel 304 Angle
- Stainless Steel 304 Channel
- Stainless Steel 304 H Beam
- Stainless Steel 304 I Beam
- Stainless steel 304 Welded Tubes
- Stainless Steel 304 Single Slotted Pipe
- Stainless Steel 304 Double Slotted Pipe
- Stainless steel 304 fittings
- Stainless Steel 304 Components
- Stainless Steel 309 Rod/Bar
- Stainless Steel 309 Hex Bar
- Stainless Steel 309 Square Bar
- Stainless Steel 309 Welded Pipes
- Stainless Steel 309 Plates Sheet
- Stainless steel 309 fittings
- Stainless Steel 309 Components
- Stainless Steel 310 Rod / Bar
- Stainless steel 310 Hex Bars
- Stainless Steel 310 Square Bar
- Stainless Steel 310 Welded Pipes
- Stainless Steel 310 Plates/Sheet
- Stainless Steel 310 Seamless Pipes
- Stainless steel 310 Welded Tubes
- Stainless steel 310 fittings
- Stainless steel 310 channels
- Stainless steel 310 H Beam
- Stainless steel 310 I Beam
- Stainless steel 310 seamless tubes
- Stainless Steel 310 Components
- Stainless Steel 316 / 316Ti Flanges
- Stainless Steel 316 / 316Ti Rod
- Stainless Steel 316 / 316Ti Hex Bars
- Stainless Steel 316 / 316Ti Square Bars
- Stainless Steel 316 / 316Ti Seamless Pipes
- Stainless Steel 316 / 316Ti Welded Pipes
- Stainless Steel 316 / 316Ti Plates
- Stainless Steel 316 / 316Ti Welded Tubes
- Stainless Steel 316 / 316Ti Seamless Tubes
- Stainless Steel 316 / 316Ti Flat Bars
- Stainless Steel 316 / 316Ti Angles
- Stainless Steel 316 / 316Ti Channels
- Stainless Steel 316 / 316Ti H Beams
- Stainless Steel 316 / 316Ti I Beam
- Stainless Steel 316 / 316Ti Pipe Fittings
- Stainless Steel 316 Single Slotted Pipe
- Stainless Steel 316 Double Slotted Pipe
- Stainless Steel 316/316Ti Components
- Stainless Steel 317L Flanges
- Stainless Steel 317L Rod/Bar
- Stainless Steel 317L Hex Bar
- Stainless steel 317L Square Bar
- Stainless Steel 317L Plates/Sheet
- Stainless steel 317L channels
- Stainless steel 317L H Beam
- Stainless steel 317L I Beam
- Stainless steel 317L fittings
- Stainless Steel 317L Components
- Stainless Steel 321 / 347 Flanges
- Stainless Steel 321/347 Rod/Bar
- Stainless Steel 321/347 Hex Bar
- Stainless Steel 321/347 Square Bar
- Stainless Steel 321/347 Seamless Pipes
- Stainless Steel 321/347 Welded Pipes
- Stainless Steel 321 / 347 Pipe Fittings
- Stainless Steel 321/347 Plates/Sheet
- Stainless steel 321 / 347 Welded Tubes
- Stainless steel 321 / 347 seamless tubes
- Stainless steel 321 / 347 channels
- Stainless steel 321 / 347 H Beam
- Stainless steel 321 / 347 I Beam
- Stainless Steel 321 / 347 Components
- Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Flange
- Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Rod/Bars
- Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Hex Bar
- Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Square Bar
- Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Welded Pipes
- Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Sheet /Plates/Coil
- Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Welded tubes
- Stainless Steel 409/409M/409L/410/430/430F/431/439/441 Channel
- Stainless Steel 409/409M/409L/410/430/430F/431/439/441 H Beam
- Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 I Beam
- Stainless Steel 409 / 409M / 409L / 410 / 430 / 430F / 431 / 439 / 441 Components
- Stainless Steel 420/ 420B & 420C Rod/Bar
- Stainless steel 420 / 420B & 420C hex bars
- Stainless Steel 420/ 420B & 420C Square Bar
- Stainless Steel 420/ 420B & 420C Plates/Sheet
- Stainless Steel 420/420B/420C Components
- Stainless Steel 416 / 440C / 446 Rod / Bar
- Stainless Steel 416 / 440C / 446 Hex Bar
- Stainless Steel 416 / 440C / 446 Square Bar
- Stainless Steel 416 / 440C / 446 Sheet / Plates / Coil
- Stainless Steel 416/440C/446 Components
- Stainless Steel 904L Rod & Bar
- Stainless Steel 904L Hex Bar
- Stainless Steel 904L Square Bar
- Stainless Steel 904L Welded Pipes
- Stainless Steel 904L Plates & Sheets
- Stainless Steel 904L Components
- Stainless steel 201 / J1 /J2 / J3 / J4 / 204CU / JSL AUS / JSL USD / JSL UDD plates
- Stainless steel 201 / J1 /J2 / J3 / J4 / 204CU / JSL AUS / JSL USD / JSL UDD Flat bars
- Stainless steel 15-5PH / 17-4 PH / 17-7PH Rod / Bars
- Stainless Steel 17-4 PH Hex Bar
- Stainless Steel 17-4 PH Square Bar
- Stainless Steel 17-4 PH Plates/Sheet
- Stainless steel 15-5PH / 17-4 PH / 17-7PH Flanges
- Stainless Steel 329 Square Bars
- Stainless Steel 329 Hex Bars
- Stainless Steel 329 Rod / Bars
Send Us Message
Got a question? We’d love to hear from you. Send us a message & we’ll respond as soon as possible.
Material Grade
| Material | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| Finish | Thickness | Characteristics | Applications |
| No. 1 | 3.0mm~50.0mm | Finished by hot-rolling, annealing and pickling, characterized by white pickled surface | Chemical industry equipment, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface | General Application Medical Instruments, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware, architectural purpose |
| No. 4 | 0.4mm~3.0mm | Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes | Milk & Food processing facilities, Hospital Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
| HL(Hair Line) | 0.4mm~3.0mm | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware vehicles |
Chemical Composition
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Nb |
|
201 |
≤0.15 |
≤1.0 |
5.50-7.50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3.50-5.50 |
- |
- |
0.05-0.25 |
- |
- |
|
202 |
≤0.15 |
≤1.0 |
7.50-10.00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4.00-6.00 |
- |
- |
0.05-0.25 |
- |
- |
|
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6.00-8.00 |
- |
- |
≤0.1 |
- |
- |
|
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
|
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
|
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304H |
0.04-0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0.10-0.16 |
- |
- |
|
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6.00-9.00 |
- |
- |
- |
1.00-3.00 |
- |
|
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10.50-13.00 |
- |
- |
- |
- |
- |
|
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22.00-24.00 |
12.00-15.00 |
- |
- |
- |
- |
- |
|
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24.00-26.00 |
19.00-22.00 |
- |
- |
- |
- |
- |
|
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0.10-0.16 |
- |
- |
|
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
|
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11.00-15.00 |
3.00-4.00 |
- |
- |
- |
- |
|
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0.7 |
- |
- |
- |
|
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
|
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
|
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4.50-6.50 |
2.50-3.50 |
- |
0.08-0.20 |
- |
- |
|
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24.00-26.00 |
6.00-8.00 |
3.00-5.00 |
- |
0.24-0.32 |
- |
- |
|
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19.00-23.00 |
23.00-28.00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
|
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14.00-16.50 |
Other |
- |
- |
- |
- |
- |
|
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
|
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
|
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
420J1 |
0.16-0.25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
420J2 |
0.26-0.40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
|
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
440A |
0.60-0.75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440B |
0.75-0.95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440C |
0.95-1.2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
441 |
≤0.03 |
0.2-0.8 |
≤0.7 |
≤0.03 |
≤0.015 |
17.50-18.50 |
- |
≤0.5 |
0.1-0.5 |
≤0.025 |
- |
0.3+3C-0.9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.
