ʻO Incoloy 800H, i kapa ʻia ʻo "Alloy 800H", ua koho ʻia ʻo UNS N08810 a i ʻole DIN W.Nr. 1.4958. Aneane like ia me ka Alloy 800 koe wale no ka mea e pono ai ka hoʻohui kalapona kiʻekiʻe aʻe i mea e hoʻomaikaʻi ai i nā waiwai wela kiʻekiʻe. Hoʻohālikelike ʻia meIncoloy 800, ʻoi aku ka maikaʻi o nā hiʻohiʻona kolo a me ka ʻāʻī ʻana i ka 1100°F [592°C] a i 1800°F [980°C]. ʻOiai e hoʻopili pinepine ʻia ʻo Incoloy 800 ma kahi o 1800°F [980°C], pono e hoʻopili ʻia ʻo Incoloy 800H ma kahi o 2100°F [1150°C]. Ma waho aʻe, ʻoi aku ka nui o ka nui o ka palaoa ʻo Alloy 800H e like me ASTM 5.
1. Nā Koina Hoʻohui Kemika
| ʻO ka hoʻohui ʻana o ke kino o Incoloy 800, % | |
|---|---|
| Nikela | 30.0-35.0 |
| Cromium | 19.0-23.0 |
| hao | ≥39.5 |
| Kalapona | 0.05-0.10 |
| Aluminum | 0.15-0.60 |
| Titanium | 0.15-0.60 |
| Manganese | ≤1.50 |
| Sulfur | ≤0.015 |
| Silika | ≤1.00 |
| keleawe | ≤0.75 |
| Al+Ti | 0.30-1.20 |
2. Mea Mechanical o Incoloy 800H
ASTM B163 UNS N08810, Incoloy 800H paipu lauwili ʻole, 1-1/4″ x 0.083″(WT) x 16.6′(L).
| Paʻa Paʻa, min. | Ka ikaika hua, min. | Elongation, min. | Ka paakiki, min. | ||
|---|---|---|---|---|---|
| Mpa | ksi | Mpa | ksi | % | HB |
| 600 | 87 | 295 | 43 | 44 | 138 |
3. Na Waiwai Kino o Incoloy 800H
| ʻO ka mānoanoa | Lahui hehee | Wela Kūikawā | Kū'ē Uila | ||
|---|---|---|---|---|---|
| g/cm3 | °C | °F | J/kg. k | Btu/lb.°F | µΩ·m |
| 7.94 | 1357-1385 | 2475-2525 | 460 | 0.110 | 989 |
4. Nā ʻano huahana a me nā kūlana o Incoloy 800H
| Huahana Mai | Kūlana |
|---|---|
| ʻO Rod a me Bar | ASTM B408, EN 10095 |
| Papa, Pepa a me ke kaha | ASTM A240, A480, ASTM B409, B906 |
| Paipu a me ka paipu ʻole | ASTM B829, B407 |
| Paipu & Paipu Weled | ASTM B514, B515, B751, B775 |
| ʻO nā mea i hoʻopili ʻia | ASTM B366 |
| Ke kalaiwa ana | ASTM B564, DIN 17460 |
Ka manawa hoʻouna: Oct-23-2020