inconel 600,625,601,690,660,718,783,617,x-750 Nā ʻāpana nickle kiʻekiʻe no ka noi ʻoihana aerospace
ʻO ka wehewehe pōkole:
inconel 600,625,601,690,660,718,783,617,x-750 Nā ʻāpana nickle kiʻekiʻe no ka noi ʻoihana aerospace | ||
| Nā kikoʻī | : | ASTM B446 / ASTM SB446 |
| Anana | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Nui | : | 5 mm i 500 mm |
| Anawaena | : | 0.1 mm a 100 mm |
| Ka lōʻihi | : | 100 mm a i 3000 mm ka lōʻihi & luna |
| Hoʻopau | : | ʻEleʻele, Hoʻomaʻamaʻa ʻulaʻula, Huli ʻia ʻo Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Hoʻomanawanui | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 a i ʻole e like me nā koi o nā mea kūʻai aku. |
| Puka | : | Poe, huinaha, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Nā ʻano oInconel 625 Bars/ Nā lāʻau
 | Inconel 625 Bright Bar | Inconel 625 Bright Bar 625 Inconel Bright Bar Pākuʻi Inconel 625 Bar Bright UNS N06625 Inconel Bright Bar WERKSTOFF NR. 2.4856 Pākuʻi Māmā ASTM B446 625 Inconel Bright Bar |
 | Inconel 625 Hex Bar | Inconel 625 Hex Bar 625 Inconel Hexagonal Bar 625 Inconel Alloy Hex Bar UNS N06625 Inconel Hexagonal Bar ASTM B446 625 Inconel Hex Bar |
 | Inconel 625 Paʻa Kūlike | Inconel 625 Paʻa Kūlike 625 Inconel Paha Paha 625 Inconel Alloy Square Bar UNS N06625 Inconel Square Bar WERKSTOFF NR. 2.4856 Pahu huinaha ʻO ASTM B446 625 Inconel Square Bars |
 | Inconel 625 Paʻa ʻAha | Inconel 625 Paʻa ʻAha 625 Nā Paʻa ʻAha ʻAha Inconel 625 Inconel Alloy Rectangular Bar UNS N06625 Inconel Nā Paʻa Paʻahā WERKSTOFF NR. 2.4856 Paʻa ʻAhamaha ASTM B446 625 Inconel Bar Rectangular Bar |
 | ʻO Inconel 625 Nā Bar Flat | ʻO Inconel 625 Bar Flat 625 Inconel Alloy Flat Bars 625 Paa Paha Inconel UNS N06625 Inconel Paha Paha WERKSTOFF NR. 2.4856 Pae Paa ʻO ASTM B446 625 Inconel Flat Bars |
 | ʻO Inconel 625 Bar Polished | ʻO Inconel 625 Bar Polished 625 ʻO ka pahu hoʻomaʻemaʻe Inconels 625 Inconel Alloy i poni ʻia UNS N06625 ʻO ka pahu hoʻomaʻemaʻe Inconels WERKSTOFF NR. 2.4856 Bar Polina ASTM B446 625 Inconel Polani Bar |
 | Inconel 625 Pae Uila | Inconel 625 Pae Uila 625 Nā Bar Uila Inconel 625 Inconel Alloy Threaded Bar UNS N06625 Inconel Threaded Bar WERKSTOFF NR. 2.4856 Pae Uila ASTM B446 625 Inconel Threaded Bar |
625 Bar Poe InconelHoʻohui Kimia
| Papa | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
| Inconel 625 | 0.10 ka nui | 0.50 ka nui | 0.50 ka nui | – | 0.15 min | 5.0 ka nui | – | 58.0 min | 20.0–23.0 |
Papa Mea
| Mea waiwai | ASTM A240 maʻamau | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410L |
| ASTM A480 maʻamau | 302, s30215, s30452, s30615, 308, 309. 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S334525, S334525 03, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Kūlana | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Kūlana | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS3010S, SUS309S, SUS309S, SUS5SUS J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J3L, SUS329J4L, SUS329J4 0, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Huahana Huahana
| Hoʻopau | mānoanoa | Nā hiʻohiʻona | Nā noi |
| Helu 1 | 3.0mm~50.0mm | Hoʻopau ʻia e ka ʻōwili wela, annealing a me ka pickling, i hōʻike ʻia e ka ʻili keʻokeʻo pickled | Nā lako hana kemika, nā pahu pahu hana |
| Helu 2B | 0.3mm~6.0mm | Hoʻopau ʻia e ka mālama wela, pickling ma hope o ka ʻōwili anu, a ukali ʻia e ka laina pass ili e ʻoi aku ka mālamalama a me ka maʻalahi o ka ʻili | Na Lapaau Lapaau Lapaau Lapaau, Mea Pakaukau |
| ʻAʻole. BA (Bright Annealed) | 0.5mm~2.0mm | Hoʻomaʻamaʻa wela ma hope o ka ʻōwili anu | Mea lako kīhini, lako kīhini, kumu hoʻolālā |
| Helu 4 | 0.4mm~3.0mm | ʻO ka polishing me ka helu 150 a hiki i ka No.180 mesh abrasives. ʻO nā hoʻopau kaulana loa | Nā lako hana waiu a me nā meaʻai, Lako Halemai, ʻauʻau |
| Helu 8 | 0.5mm~2.0mm | ʻO kahi aniani e like me ka hoʻohālikelike ʻana ma o ka poli ʻana me nā abrasive ʻoi aku ka maikaʻi ma mua o 800 mesh | Reflector, Mirror, Kalaiaina-waho no ke kūkulu hale |
| HL(Laina lauoho) | 0.4mm~3.0mm | Hoʻopau ʻia e ka hoʻopololei laina mau | Nā kumu hoʻolālā, nā escalators, nā kaʻa lako kīhini |
Hoʻohui Kimia
| Papa | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | 'ē aʻe | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
ʻO mākoue hoʻopili i nā huahana kila me ka pepa anti-rust a me nā apo kila e pale ai i ka pōʻino.
Hoʻopili ʻia nā lepili ʻike e like me ke kikoʻī maʻamau a i ʻole nā ʻōlelo a ka mea kūʻai aku.
Loaʻa ka paʻi kūikawā e like me ka makemake o ka mea kūʻai aku.
Pūʻolo huila kila kila
ʻO ka Pepa Kūleʻa Kūleʻa / Pāʻani Pāʻani Kūleʻa
Pūʻolo ʻōniʻoniʻo hao hao
Pūʻolo Hoʻouna
Hoʻokumu ʻia kā mākou hui ma Wuxi, e hōʻiliʻili i ke kūlanakauhale o ke kila kila kila ma Kina.
Hoʻomaʻamaʻa mākou i nā wili kulika, nā lau a me ka pā, ka paipu kila kila a me nā mea pono, nā paipu kila kila, a me nā huahana aluminika a me nā huahana keleawe.
Ua mahalo nui ʻia kā mākou huahana e kā mākou mea kūʻai mai ʻEulopa, ʻAmelika, ka Middle East, ʻApelika a me Asia Hema. E hāʻawi mākou i nā huahana hoʻokūkū a me ka lawelawe piha i nā mea kūʻai aku.
Papa kila kila: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 4, 4, 4, 4, 4 30F, 440, 440c,
Alloy Grade : Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminum, Alloy Steel, Carbon Steel, Special Nickel Alloys
Ma ke ano o: Poepoe Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: He aha ka mea kila?
A: ʻAʻohe mea hōʻailona ma ka ʻili kila, a i ʻole kekahi ʻano kila ʻaʻole i hoʻopōʻino ʻia e ka ea a i ʻole ka wai a ʻaʻole hoʻololi i ka waihoʻoluʻu, kīnā ʻole, kūpaʻa i ka ʻili, ka ʻōpala, ka hopena corrosive o nā kemika.
Q2: ʻAʻole manaʻo ʻia ʻaʻohe ʻōpala?
A: ʻAʻole, ʻaʻole maʻalahi ke ʻano ʻeleʻele a ʻulaʻula paha, hiki iā ia ke hoʻihoʻi hou i ka staining, ka ʻōpala a me ka ʻino.
Q3: Ke hoʻolako nei ʻoe i nā ʻāpana kila kila?
A: ʻAe, hāʻawi mākou i nā ʻano like ʻole o nā ʻāpana kila kila, me nā pae mānoanoa mai 0.3-3.0mm. a ma nā hoʻopau like ʻole.
Q4: Keʻae neiʻoe i kaʻokiʻana i ka lawelawe lōʻihi?
A: ʻOiaʻiʻo, ʻo ka ʻoluʻolu o ka mea kūʻai aku ko mākou mea nui.
Q5: Inā loaʻa iaʻu kahi kauoha liʻiliʻi, e ʻae ʻoe i kahi kauoha liʻiliʻi?
A: ʻAʻole pilikia, ʻo kou hopohopo ko mākou hopohopo, ʻae ʻia nā mea liʻiliʻi.
Q6: Pehea e hiki ai iā ʻoe ke hōʻoia i ka maikaʻi o kāu huahana?
A: ʻO ka mea mua, mai ka hoʻomaka ʻana, ua hoʻokō mākou i kahi ʻuhane i ko lākou noʻonoʻo, ʻo ia ka maikaʻi o ke ola, ʻo kā mākou limahana limahana a me nā limahana e hahai i kēlā me kēia hana a hoʻopaʻa maikaʻi ʻia nā ukana a hoʻouna ʻia i waho.
Q7: E hoʻopili anei ʻoe i nā huahana?
A: Hana ka poʻe ʻoihana i ka hoʻopili ʻana i ka ʻoihana, loaʻa iā mākou nā ʻano ʻokoʻa o ka packing i koho ʻia i nā mea kūʻai aku, hoʻokele waiwai a ʻoi aku paha.
Q8: He aha kāu e pono ai e ʻike mai ka mea kūʻai aku ma mua o ka ʻōlelo pololei?
A: No ka ʻōlelo kikoʻī, pono mākou e ʻike i ka papa, ka mānoanoa, ka nui, ka pau ʻana o ka ʻili, ka waihoʻoluʻu a me ka nui o kāu kauoha, a me ka huakaʻi o ka waiwai. E makemake nui ʻia ka ʻike huahana maʻamau, e like me ke kaha kiʻi, ka hoʻolālā a me ka hoʻolālā. A laila e hāʻawi mākou i ka ʻōlelo hoʻokūkū me ka ʻike ma luna.
Q9: He aha ke ʻano o ka manawa uku āu e ʻae ai?
A: Keʻae nei mākou iā T / T, West union, L / C.
Q10: Inā he kauoha liʻiliʻi kēia, e hāʻawi anei ʻoe i nā waiwai i kā mākou luna?
A: ʻAe, ua hānau ʻia mākou e hoʻoponopono i nā pilikia o kā mākou mea kūʻai aku, e kiʻi pono mākou i nā waiwai i ka hale kūʻai o kāu luna a hoʻouna aku iā ʻoe i nā kiʻi.
Q11: Ke hana wale nei ʻoe i ka pepa pālahalaha? Makemake au e hana i ka hana no ka'u papahana hou.
A: ʻAʻole, hana nui mākou i ka hoʻomaʻamaʻa ʻana i ke kila kila, i ka manawa like, hana mākou i nā huahana metala maʻamau e like me ke kiʻi a me ka hoʻolālā o ka mea kūʻai aku, e mālama kā mākou ʻenehana i ke koena.
Q12: ʻEhia mau ʻāina āu i lawe aku ai?
A: Ua lawe ʻia aku i nā ʻāina ʻoi aku ma mua o 50 mai ʻAmelika, Russia, UK, Kuwait, Egypt, Iran,
Tureke, Ioredane, etc.
Q13: Pehea e hiki ai iaʻu ke loaʻa kekahi mau laʻana?
A: Nā mea liʻiliʻi liʻiliʻi ma ka hale kūʻai a hiki ke hāʻawi i nā hōʻailona no ka manuahi. Loaʻa ka Catalgue, ka hapa nui
nā hiʻohiʻona ua mākaukau mākou i nā laʻana i ka waihona. Hoʻopili ʻia nā laʻana e pili ana i 5-7days.
Q14: He aha ka lawe ʻana?
A: ʻO ka manawa hāʻawi o ka laʻana he 5-7 lā. ʻO nā kauoha pahu ma kahi o 15-20 mau lā.
Q15: He aha ka noi e pili ana i kāu huahana?
A: 1.elevator puka / hale 'ole a me ka escalator 'aoʻao-pā.
2. Pā i loko a ma waho paha o ka lumi hālāwai / hale ʻaina.
3.Facade i ka wā e hoʻopaʻa ai i kekahi mea, e like me nā kolamu i loko o ke keʻena.
4.Ceiling ma ka hale kūʻai. 5.Decorative kiʻi ma kekahi mau wahi leʻaleʻa.
Q16: Pehea ka lōʻihi e hiki ai iā ʻoe ke hōʻoiaʻiʻo no kēia huahana / hoʻopau?
A: Hōʻoia kala no nā makahiki he 10. Hiki i ka palapala hōʻoia waiwai kumu
e hoolakoia.
