C17200 BeCu 25 Beryllium Copper Tube/Tube/Bar/Uea/Pepa
ʻO ka wehewehe pōkole:
CuBe2 – UNS.C17200 Beryllium Copper AlloysC17200Nā kikoʻī:
C17200Beryllium Copper
Cube2 – C17200 (CDA 172)ʻO ka beryllium copper ka mea maʻamau i hoʻohana pinepine ʻia. Ke hoʻohālikelike ʻia me ia, ʻoi aku ka ikaika a me ka paʻakikī.ʻO nā hui keleawe kālepa.C17200 alloy loaʻa iā appr.Me 2% beryllium, hiki i kona ikaika tensile hope loa ke ʻoi aku ma mua o 200 ksi, a ua kokoke kona paʻakikī iā Rockwell c45.I ka manawa like, ma lalo o ke kūlana o ka ʻelemakule piha, ʻo ka conductivity ma kahi o 22% IACS.Loaʻa i ka c17200 ke kūpaʻa maikaʻi loa i ka hoʻomaha hoʻomaha hoʻomaha kiʻekiʻe.
C17200 Beryllium copper alloy alloys Nā noi maʻamau:
ʻoihana uila:nā mea hoʻololi uila a me nā ʻūhā relay, clip clips, nā ʻāpana hoʻololi, nā ʻāpana relay, nā mea hoʻohui, nā mea hoʻopili puna, nā alahaka pili, nā mea holoi Belleville, nā mea hoʻokele, clip
nā mea paʻa:nā mea holoi, nā mea hoʻopaʻa, nā mea holoi laka, nā apo paʻa, nā wili, nā wili, nā kī.
ʻOihana:nā pamu, nā pūnāwai, ka electrochemistry, nā lāʻau, nā mea hana palekana non-sparking, flexible hoses, mea kani, bearings, bushings, valve noho, valve stems , Diaphragms, springs, welding equipment, rolling mill parts, spline shafts, pump parts, valves, Bourdon nā paipu, hoʻohana i nā pā ma nā mea kaumaha, nā bellows
Nui loaʻa:
ke anawaena maʻamau a me ka nui, ka lōʻihi wili ʻole
Loaʻa nā huahana (papa):
kaa poepoe, kaa poepoe, na uwea poepoe, na paipu poepoe,
nā kaola palahalaha, nā kīhāhā, nā kīhāhāhāhā, nā kī hexagonal, nā papa, nā pā, nā ʻōwili,
Hiki ke hāʻawi ʻia nā ʻano hana maʻamau ma ke noi.
haku mele kemika:
E: 1.85-2.10%
Co + Ni: 0.20% minuke.
Co + Ni + Fe: 0.60% mm kiʻekiʻe.
Cu: Kaulike
Nānā: ʻO kaʻO ka nui o ke keleawe i hoʻohui ʻia e like me ka liʻiliʻi loa 99.5%.
Nā waiwai kino maʻamau:
Māmā (g/cm3):
8.36 Māmā ma mua o ka ʻelemakule (g/cm3): 8.25
Modulus o ka elasticity (kg/mm2 (103)): 13.40
Ka helu o ka hoʻonui wela (20 °C a 200 °C m/°C): 17×10-6
ʻO ke kau wela wela (cal/(cm-s-°C): 0.25
Ka hoohehee ana (°C): 870-980
Nānā:
1).Hoʻokumu ʻia ka ʻāpana ma ka ʻōnaehana metric.
2).Pili nā waiwai kino maʻamau i nā huahana paʻakikī makahiki.
Nā kikoʻī o ka honua:
Rod/Tube:ASTM B196, 251,463; SAE J461, 463; AMS 4533, 4534,; AMS4650, 4651;
ʻAno RWMA 4
:ASTM B194, AMS4530, 4532; SAE J461, 463
kaha kiʻi:Hoʻohālike: ASTM B194
Uea:ASTM B197, AMS4725, SAE J461, 463
nā papa:ASTM B194, SAE J461, 463; AMS4530, 4533, 4534, AMS4650, 4651; RWMA papa 4.
Nā kūlana ʻEulopa:CuBe2, DIN 2.1247, CW101C i EN
Nānā:
ASTM:ʻAmelika Hui Pū ʻIa no ka hoʻāʻo a me nā lako
SAE:Ahahui o na Enekinia Kaa
AMS:Hōʻike kikoʻī o nā mea Aerospace (i paʻi ʻia e SAE)
RWMA:KūʻēwiliwiliHui Manufacturers Hui
Nānā:Inā ʻaʻole i kuhikuhi ʻia, e hana ʻia nā mea i ka ASTM.
Nā waiwai mīkini:
E hāʻawi ʻia nā waiwai mīkini e like me nā koi o ka mea kūʻai aku.
ʻO ka maʻamau i hoʻohana pinepine ʻia:
lāʻau/pu: A (TB00), H (TD04), AT (TF00), HT (TH04)
me: A (TB00), 1/4 H (TD01), 1/2 H (TD02) , H (TD04)
Pepa: A (TB00), 1/4 H (TD01), 1/2 H (TD02), H (TD04), AT (TF00)
Uea alakai: A (TB00), 1/4 H (TD01) ), 1/2 H (TD02), 3/4 H (TD03), H (TD04)
papa: A (TB00), H (TD04), AT (TF00), HT (TH04)
Papa Mea
| Mea waiwai | ASTM A240 maʻamau | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410L |
| ASTM A480 maʻamau | 302. 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S310254, S310254, S310601 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32204, S32205 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Kūlana | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Kūlana | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS3010S, SUS3010S, SUS SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J1, SUS317J1, SUSL836J2 SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS4364, SUS4364 SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Huahana Huahana
| Hoʻopau | mānoanoa | Nā hiʻohiʻona | Nā noi |
| Helu 1 | 3.0mm~50.0mm | Hoʻopau ʻia e ka ʻōwili wela, annealing a me ka pickling, i hōʻike ʻia e ka ʻili keʻokeʻo pickled | Nā lako hana kemika, nā pahu pahu hana |
| Helu 2B | 0.3mm~6.0mm | Hoʻopau ʻia e ka mālama wela, pickling ma hope o ka ʻōwili anu, a ukali ʻia e ka laina pass ili e ʻoi aku ka mālamalama a me ka maʻalahi o ka ʻili | Na Lapaau Lapaau Lapaau Lapaau, Mea Pakaukau |
| ʻAʻole. BA (Bright Annealed) | 0.5mm~2.0mm | Hoʻomaʻamaʻa wela ma hope o ka ʻōwili anu | Mea lako kīhini, lako kīhini, kumu hoʻolālā |
| Helu 4 | 0.4mm~3.0mm | ʻO ka polishing me ka helu 150 a hiki i ka No.180 mesh abrasives. ʻO nā hoʻopau kaulana loa | Nā lako hana waiu a me nā meaʻai, Lako Halemai, ʻauʻau |
| Helu 8 | 0.5mm~2.0mm | ʻO kahi aniani e like me ka hoʻohālikelike ʻana ma o ka poli ʻana me nā abrasive ʻoi aku ka maikaʻi ma mua o 800 mesh | Reflector, Mirror, Kalaiaina-waho no ke kūkulu hale |
| HL(Laina lauoho) | 0.4mm~3.0mm | Hoʻopau ʻia e ka hoʻopololei laina mau | Nā kumu hoʻolālā, nā escalators, nā kaʻa lako kīhini |
Hoʻohui Kimia
| Papa | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | 'ē aʻe | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
ʻO mākoue hoʻopili i nā huahana kila me ka pepa anti-rust a me nā apo kila e pale ai i ka pōʻino.
Hoʻopili ʻia nā lepili ʻike e like me ke kikoʻī maʻamau a i ʻole nā ʻōlelo a ka mea kūʻai aku.
Loaʻa ka paʻi kūikawā e like me ka makemake o ka mea kūʻai aku.
Pūʻolo huila kila kila
ʻO ka Pepa Kūleʻa Kūleʻa / Pāʻani Pāʻani Kūleʻa
Pūʻolo ʻōniʻoniʻo hao hao
Pūʻolo Hoʻouna
Hoʻokumu ʻia kā mākou hui ma Wuxi, e hōʻiliʻili i ke kūlanakauhale o ke kila kila kila ma Kina.
Hoʻomaʻamaʻa mākou i nā wili kulika, nā lau a me ka pā, ka paipu kila kila a me nā mea pono, nā paipu kila kila, a me nā huahana aluminika a me nā huahana keleawe.
Ua mahalo nui ʻia kā mākou huahana e kā mākou mea kūʻai mai ʻEulopa, ʻAmelika, ka Middle East, ʻApelika a me Asia Hema. E hāʻawi mākou i nā huahana hoʻokūkū a me ka lawelawe piha i nā mea kūʻai aku.
Papa kila kila: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 413 430, 430F, 440, 440c,
Alloy Grade : Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminum, Alloy Steel, Carbon Steel, Special Nickel Alloys
Ma ke ano o: Poepoe Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: He aha ka mea kila?
A: ʻAʻohe mea hōʻailona ma ka ʻili kila, a i ʻole kekahi ʻano kila ʻaʻole i hoʻopōʻino ʻia e ka ea a i ʻole ka wai a ʻaʻole hoʻololi i ka waihoʻoluʻu, kīnā ʻole, kūpaʻa i ka ʻili, ka ʻōpala, ka hopena corrosive o nā kemika.
Q2: ʻAʻole manaʻo ʻia ʻaʻohe ʻōpala?
A: ʻAʻole, ʻaʻole maʻalahi ke ʻano ʻeleʻele a ʻulaʻula paha, hiki iā ia ke hoʻihoʻi hou i ka staining, ka ʻōpala a me ka ʻino.
Q3: Ke hoʻolako nei ʻoe i nā ʻāpana kila kila?
A: ʻAe, hāʻawi mākou i nā ʻano like ʻole o nā ʻāpana kila kila, me nā pae mānoanoa mai 0.3-3.0mm. a ma nā hoʻopau like ʻole.
Q4: Keʻae neiʻoe i kaʻokiʻana i ka lawelawe lōʻihi?
A: ʻOiaʻiʻo, ʻo ka ʻoluʻolu o ka mea kūʻai aku ko mākou mea nui.
Q5: Inā loaʻa iaʻu kahi kauoha liʻiliʻi, e ʻae ʻoe i kahi kauoha liʻiliʻi?
A: ʻAʻole pilikia, ʻo kou hopohopo ko mākou hopohopo, ʻae ʻia nā mea liʻiliʻi.
Q6: Pehea e hiki ai iā ʻoe ke hōʻoia i ka maikaʻi o kāu huahana?
A: ʻO ka mea mua, mai ka hoʻomaka ʻana, ua hoʻokō mākou i kahi ʻuhane i ko lākou noʻonoʻo, ʻo ia ka maikaʻi o ke ola, ʻo kā mākou limahana limahana a me nā limahana e hahai i kēlā me kēia hana a hoʻopaʻa maikaʻi ʻia nā ukana a hoʻouna ʻia i waho.
Q7: E hoʻopili anei ʻoe i nā huahana?
A: Hana ka poʻe ʻoihana i ka hoʻopili ʻana i ka ʻoihana, loaʻa iā mākou nā ʻano ʻokoʻa o ka packing i koho ʻia i nā mea kūʻai aku, hoʻokele waiwai a ʻoi aku paha.
Q8: He aha kāu e pono ai e ʻike mai ka mea kūʻai aku ma mua o ka ʻōlelo pololei?
A: No ka ʻōlelo kikoʻī, pono mākou e ʻike i ka papa, ka mānoanoa, ka nui, ka pau ʻana o ka ʻili, ka waihoʻoluʻu a me ka nui o kāu kauoha, a me ka huakaʻi o ka waiwai. E makemake nui ʻia ka ʻike huahana maʻamau, e like me ke kaha kiʻi, ka hoʻolālā a me ka hoʻolālā. A laila e hāʻawi mākou i ka ʻōlelo hoʻokūkū me ka ʻike ma luna.
Q9: He aha ke ʻano o ka manawa uku āu e ʻae ai?
A: Keʻae nei mākou iā T / T, West union, L / C.
Q10: Inā he kauoha liʻiliʻi kēia, e hāʻawi anei ʻoe i nā waiwai i kā mākou luna?
A: ʻAe, ua hānau ʻia mākou e hoʻoponopono i nā pilikia o kā mākou mea kūʻai aku, e kiʻi pono mākou i nā waiwai i ka hale kūʻai o kāu luna a hoʻouna aku iā ʻoe i nā kiʻi.
Q11: Ke hana wale nei ʻoe i ka pepa pālahalaha? Makemake au e hana i ka hana no ka'u papahana hou.
A: ʻAʻole, hana nui mākou i ka hoʻomaʻamaʻa ʻana i ke kila kila, i ka manawa like, hana mākou i nā huahana metala maʻamau e like me ke kiʻi a me ka hoʻolālā o ka mea kūʻai aku, e mālama kā mākou ʻenehana i ke koena.
Q12: ʻEhia mau ʻāina āu i lawe aku ai?
A: Ua lawe ʻia aku i nā ʻāina ʻoi aku ma mua o 50 mai ʻAmelika, Russia, UK, Kuwait, Egypt, Iran,
Tureke, Ioredane, etc.
Q13: Pehea e hiki ai iaʻu ke loaʻa kekahi mau laʻana?
A: Nā mea liʻiliʻi liʻiliʻi ma ka hale kūʻai a hiki ke hāʻawi i nā hōʻailona no ka manuahi. Loaʻa ka Catalgue, ka hapa nui
nā hiʻohiʻona ua mākaukau mākou i nā laʻana i ka waihona. Hoʻopili ʻia nā laʻana e pili ana i 5-7days.
Q14: He aha ka lawe ʻana?
A: ʻO ka manawa hāʻawi o ka laʻana he 5-7 lā. ʻO nā kauoha pahu ma kahi o 15-20 mau lā.
Q15: He aha ka noi e pili ana i kāu huahana?
A: 1.elevator puka / hale 'ole a me ka escalator 'aoʻao-pā.
2. Pā i loko a ma waho paha o ka lumi hālāwai / hale ʻaina.
3.Facade i ka wā e hoʻopaʻa ai i kekahi mea, e like me nā kolamu i loko o ke keʻena.
4.Ceiling ma ka hale kūʻai. 5.Decorative kiʻi ma kekahi mau wahi leʻaleʻa.
Q16: Pehea ka lōʻihi e hiki ai iā ʻoe ke hōʻoiaʻiʻo no kēia huahana / hoʻopau?
A: Hōʻoia kala no nā makahiki he 10. Hiki i ka palapala hōʻoia waiwai kumu
e hoolakoia.
