Aluminum Coil A1050/1100/3003 me ASTM Standard
ʻO ka wehewehe pōkole:
1. Nā kikoʻī huahana:
| Aluminum coil/Aluminium Strip | ||||
| Aluminum Aluminum | Mānoanoa (mm) | Laulā (mm) | Ka huhū | |
| A1050,A1050,A1070,A1100 | 0.15-10 | 20-2620 | O,H12,H14,H16,H18,H22,H24,H26 | |
| A3003,A3004,A3105 | 0.15-10 | 20-2620 | O,H12,H14,H16,H18,H22,H24,H26 | |
| A5052,A5005,A5083,A5754 | 0.15-10 | 20-2620 | O,H12,H14,H34,H32,H36,H111,H112 | |
| A6061,A6082,A6063 | 0.15-10 | 20-2620 | T4,T6,T651 | |
| A8011 | 0.15-10 | 20-2620 | O,H12,H14,H16,H18,H22,H24,H26 | |
| Kaʻina hana | ʻelua CC ME DC | |||
| Mea kūʻai nui | Hiki ke hana ʻia ka nui e like me ka makemake o nā mea kūʻai aku | |||
| Ili | ʻO ka pau ʻana o ka wili, ʻulaʻula (PVDF & PE), Stucco Embossed, Pōlani ʻulaʻula, Anodizing | |||
| Mirror, Brush, Perforated, Tread plate, Corrugated etc | ||||
| Kūlana Kūlana | ASTM B209,EN573-1 | |||
| MOQ no ka nui | 2 tona | |||
| Kūkākūkā uku | TT A I ʻole LC A i ʻole DP i ka ʻike | |||
| Ka manawa hoʻouna | I loko o 25 mau lā ma hope o ka loaʻa ʻana o ka lc a i ʻole waiho | |||
| Mea Pono | hoʻopaʻa ʻia ka ʻāʻī, ʻaʻohe o nā hemahema e like me ka ʻaila ʻaila, Roll Marks, Waves, Dents, Scratch etc. | |||
| A+++ maikaʻi | ||||
| Palapala noi | Hana , Hale, ACP, Hoʻohiwahiwa , Kūleʻa, Mould, Hale Moku, Mālamalama, | |||
| mokulele, pahu aila, kino kaa, | ||||
| Hoʻopili | ʻO nā pallets lāʻau kūpono no ka lawe ʻana aku, a ʻo ka hoʻopili maʻamau ma kahi o 2.5 tons/pallet | |||
| ID wili: 508MM | ||||
| Hiki ke like ke kaumaha o ka coil e like me ka makemake o ka mea kūʻai mai 50kgs a 8000 kgs no ka coil | ||||
2. hana maʻamau:e like me ke kūlana honua maʻamau ASTM OR EN maʻamau,
ʻO nā mea hana kemika āpau, nā waiwai mīkini, ka ʻae ʻana i ka nui, ka ʻae ʻana, a pēlā aku e like me ka maʻamau ASTM OR EN.
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | 'ē aʻe | Al | |
| Single | Huina | ||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | 0.05 | 0.03 | 0.03 | _ | ≥99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | 0.05 | 0.03 | 0.03 | _ | ≥99.6 |
| 1100 | Si+Fe:0.95 | 0.05-0.40 | 0.05 | _ | _ | 0.1 | _ | 0.05 | 0.15 | ≥99 | |
| 1200 | Si+Fe:1.00 | 0.05 | 0.05 | _ | 0.1 | 0.05 | 0.05 | 0.15 | ≥99 | ||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | 0.1 | _ | 0.05 | 0.15 | Koena |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | Koena |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | 0.25 | _ | 0.05 | 0.15 | Koena |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | _ | 0.05 | 0.15 | Koena |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Koena |
| 5086 | 0.4 | 0.5 | 0.1 | 0.20~0.7 | 3.5-4.5 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Koena |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.80~1.20 | 0.04~0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Koena |
| 6063 | 0.2~0.6 | 0.35 | 0.1 | 0.1 | 0.45~0.90 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | Koena |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4~1.0 | 0.6-1.2 | 0.25 | 0.2 | 0.1 | 0.05 | 0.15 | Koena |
| 8011 | 0.5-0.9 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | 0.05 | 0.15 | Koena |
3. Kiʻi huahana a me ka paʻi ʻana:
4.Quality Assurance:
Loaʻa iā mākou ka ʻōnaehana mana maikaʻi loa mai ka alumini ingot e hoʻopau i nā huahana alumini, e hōʻoia i ka hāʻawi ʻia ʻana o nā huahana kūpono wale nō i nā mea kūʻai aku.
5.Factory Information:
ʻO mākou ka mea hana alumini nui loa ma ka ʻaoʻao hema o Kina, a ua hōʻoia pū ʻia a me 10 mau makahiki gula lālā, me ka nui o ka mahina e pili ana i 15,000 tons o nā ʻāpana alumini like ʻole a me nā coils e like me ka 1xxx series a 8xxx series, a hiki iā mākou ke hana i kekahi nui e like me koi ka mea kūʻai me ka laulā a hiki i 2620 mm.
6. No ke aha e koho ai iā mākou:
1. Mea hoʻolako i hōʻoia ʻia: He 10 mau makahiki mākou he lālā gula a hōʻoia pū ʻia ka mea hoʻolako, me ka hōʻoia maikaʻi. Ua ʻae ʻia ke kaʻina hana e sgs a me Bv.
2. Price Competitive : kumu kūʻai kumu kūʻai hale hana
3. Ka nui maʻamau: hiki iā mākou ke hana i kekahi nui e like me ka koi o nā mea kūʻai aku.
Hāʻawi hou mākou i nā mea kūʻai aku me ka pepa alumini / coil kaʻina hana hou, e like me ka anodizing, brush, polish, stucco emboss, corrugation, aniani, kala kala etc.
4. Hoʻouna wikiwiki: ma kahi o 25 mau lā ma hope o ka loaʻa ʻana o ka mea kūʻai aku lc a i ʻole waiho
5. nā mea kūʻai aku i kēia manawa: ua lawe ʻia kā mākou huahana alumini i nā wahi āpau o ka honua, hiki iā mākou ke hāʻawi iā ʻoe i kā mākou inoa mea kūʻai aku i kou ʻāina no ʻoe e nānā i kā mākou hui a me kā mākou ʻano.
6. Loaʻa nā laʻana manuahi no ka hoʻāʻo ma mua.
7. Ma hope o ka lawelawe kūʻai: loaʻa ka inoa maikaʻi no nā mea kūʻai a pau; Inā loaʻa kekahi pilikia maikaʻi me ka hōʻike nānā ʻana o ka ʻaoʻao ʻekolu, e lawe mākou i ke kuleana piha.
Papa Mea
| Mea waiwai | ASTM A240 maʻamau | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410L |
| ASTM A480 maʻamau | 302. 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S310254, S310254, S310601 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32204, S32205 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Kūlana | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Kūlana | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS3010S, SUS3010S, SUS SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J1, SUS317J1, SUSL836J2 SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS4364, SUS4364 SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Huahana Huahana
| Hoʻopau | mānoanoa | Nā hiʻohiʻona | Nā noi |
| Helu 1 | 3.0mm~50.0mm | Hoʻopau ʻia e ka ʻōwili wela, annealing a me ka pickling, i hōʻike ʻia e ka ʻili keʻokeʻo pickled | Nā lako hana kemika, nā pahu pahu hana |
| Helu 2B | 0.3mm~6.0mm | Hoʻopau ʻia e ka mālama wela, pickling ma hope o ka ʻōwili anu, a ukali ʻia e ka laina pass ili e ʻoi aku ka mālamalama a me ka maʻalahi o ka ʻili | Na Lapaau Lapaau Lapaau Lapaau, Mea Pakaukau |
| ʻAʻole. BA (Bright Annealed) | 0.5mm~2.0mm | Hoʻomaʻamaʻa wela ma hope o ka ʻōwili anu | Mea lako kīhini, lako kīhini, kumu hoʻolālā |
| Helu 4 | 0.4mm~3.0mm | ʻO ka polishing me ka helu 150 a hiki i ka No.180 mesh abrasives. ʻO nā hoʻopau kaulana loa | Nā lako hana waiu a me nā meaʻai, Lako Halemai, ʻauʻau |
| Helu 8 | 0.5mm~2.0mm | ʻO kahi aniani e like me ka hoʻohālikelike ʻana ma o ka poli ʻana me nā abrasive ʻoi aku ka maikaʻi ma mua o 800 mesh | Reflector, Mirror, Kalaiaina-waho no ke kūkulu hale |
| HL(Laina lauoho) | 0.4mm~3.0mm | Hoʻopau ʻia e ka hoʻopololei laina mau | Nā kumu hoʻolālā, nā escalators, nā kaʻa lako kīhini |
Hoʻohui Kimia
| Papa | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | 'ē aʻe | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
ʻO mākoue hoʻopili i nā huahana kila me ka pepa anti-rust a me nā apo kila e pale ai i ka pōʻino.
Hoʻopili ʻia nā lepili ʻike e like me ke kikoʻī maʻamau a i ʻole nā ʻōlelo a ka mea kūʻai aku.
Loaʻa ka paʻi kūikawā e like me ka makemake o ka mea kūʻai aku.
Pūʻolo huila kila kila
ʻO ka Pepa Kūleʻa Kūleʻa / Pāʻani Pāʻani Kūleʻa
Pūʻolo ʻōniʻoniʻo hao hao
Pūʻolo Hoʻouna
Hoʻokumu ʻia kā mākou hui ma Wuxi, e hōʻiliʻili i ke kūlanakauhale o ke kila kila kila ma Kina.
Hoʻomaʻamaʻa mākou i nā wili kulika, nā lau a me ka pā, ka paipu kila kila a me nā mea pono, nā paipu kila kila, a me nā huahana aluminika a me nā huahana keleawe.
Ua mahalo nui ʻia kā mākou huahana e kā mākou mea kūʻai mai ʻEulopa, ʻAmelika, ka Middle East, ʻApelika a me Asia Hema. E hāʻawi mākou i nā huahana hoʻokūkū a me ka lawelawe piha i nā mea kūʻai aku.
Papa kila kila: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 413 430, 430F, 440, 440c,
Alloy Grade : Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminum, Alloy Steel, Carbon Steel, Special Nickel Alloys
Ma ke ano o: Poepoe Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: He aha ka mea kila?
A: ʻAʻohe mea hōʻailona ma ka ʻili kila, a i ʻole kekahi ʻano kila ʻaʻole i hoʻopōʻino ʻia e ka ea a i ʻole ka wai a ʻaʻole hoʻololi i ka waihoʻoluʻu, kīnā ʻole, kūpaʻa i ka ʻili, ka ʻōpala, ka hopena corrosive o nā kemika.
Q2: ʻAʻole manaʻo ʻia ʻaʻohe ʻōpala?
A: ʻAʻole, ʻaʻole maʻalahi ke ʻano ʻeleʻele a ʻulaʻula paha, hiki iā ia ke hoʻihoʻi hou i ka staining, ka ʻōpala a me ka ʻino.
Q3: Ke hoʻolako nei ʻoe i nā ʻāpana kila kila?
A: ʻAe, hāʻawi mākou i nā ʻano like ʻole o nā ʻāpana kila kila, me nā pae mānoanoa mai 0.3-3.0mm. a ma nā hoʻopau like ʻole.
Q4: Keʻae neiʻoe i kaʻokiʻana i ka lawelawe lōʻihi?
A: ʻOiaʻiʻo, ʻo ka ʻoluʻolu o ka mea kūʻai aku ko mākou mea nui.
Q5: Inā loaʻa iaʻu kahi kauoha liʻiliʻi, e ʻae ʻoe i kahi kauoha liʻiliʻi?
A: ʻAʻole pilikia, ʻo kou hopohopo ko mākou hopohopo, ʻae ʻia nā mea liʻiliʻi.
Q6: Pehea e hiki ai iā ʻoe ke hōʻoia i ka maikaʻi o kāu huahana?
A: ʻO ka mea mua, mai ka hoʻomaka ʻana, ua hoʻokō mākou i kahi ʻuhane i ko lākou noʻonoʻo, ʻo ia ka maikaʻi o ke ola, ʻo kā mākou limahana limahana a me nā limahana e hahai i kēlā me kēia hana a hoʻopaʻa maikaʻi ʻia nā ukana a hoʻouna ʻia i waho.
Q7: E hoʻopili anei ʻoe i nā huahana?
A: Hana ka poʻe ʻoihana i ka hoʻopili ʻana i ka ʻoihana, loaʻa iā mākou nā ʻano ʻokoʻa o ka packing i koho ʻia i nā mea kūʻai aku, hoʻokele waiwai a ʻoi aku paha.
Q8: He aha kāu e pono ai e ʻike mai ka mea kūʻai aku ma mua o ka ʻōlelo pololei?
A: No ka ʻōlelo kikoʻī, pono mākou e ʻike i ka papa, ka mānoanoa, ka nui, ka pau ʻana o ka ʻili, ka waihoʻoluʻu a me ka nui o kāu kauoha, a me ka huakaʻi o ka waiwai. E makemake nui ʻia ka ʻike huahana maʻamau, e like me ke kaha kiʻi, ka hoʻolālā a me ka hoʻolālā. A laila e hāʻawi mākou i ka ʻōlelo hoʻokūkū me ka ʻike ma luna.
Q9: He aha ke ʻano o ka manawa uku āu e ʻae ai?
A: Keʻae nei mākou iā T / T, West union, L / C.
Q10: Inā he kauoha liʻiliʻi kēia, e hāʻawi anei ʻoe i nā waiwai i kā mākou luna?
A: ʻAe, ua hānau ʻia mākou e hoʻoponopono i nā pilikia o kā mākou mea kūʻai aku, e kiʻi pono mākou i nā waiwai i ka hale kūʻai o kāu luna a hoʻouna aku iā ʻoe i nā kiʻi.
Q11: Ke hana wale nei ʻoe i ka pepa pālahalaha? Makemake au e hana i ka hana no ka'u papahana hou.
A: ʻAʻole, hana nui mākou i ka hoʻomaʻamaʻa ʻana i ke kila kila, i ka manawa like, hana mākou i nā huahana metala maʻamau e like me ke kiʻi a me ka hoʻolālā a ka mea kūʻai aku, e mālama kā mākou ʻenehana i ke koena.
Q12: ʻEhia mau ʻāina āu i lawe aku ai?
A: Ua lawe ʻia aku i nā ʻāina ʻoi aku ma mua o 50 mai ʻAmelika, Russia, UK, Kuwait, Egypt, Iran,
Tureke, Ioredane, etc.
Q13: Pehea e hiki ai iaʻu ke loaʻa kekahi mau laʻana?
A: Nā mea liʻiliʻi liʻiliʻi ma ka hale kūʻai a hiki ke hāʻawi i nā hōʻailona no ka manuahi. Loaʻa ka Catalgue, ka hapa nui
nā hiʻohiʻona ua mākaukau mākou i nā laʻana i ka waihona. Hoʻopili ʻia nā laʻana e pili ana i 5-7days.
Q14: He aha ka lawe ʻana?
A: ʻO ka manawa hāʻawi o ka laʻana he 5-7 lā. ʻO nā kauoha pahu ma kahi o 15-20 mau lā.
Q15: He aha ka noi e pili ana i kāu huahana?
A: 1.elevator puka / hale 'ole a me ka escalator 'aoʻao-pā.
2. Pā i loko a ma waho paha o ka lumi hālāwai / hale ʻaina.
3.Facade i ka wā e hoʻopaʻa ai i kekahi mea, e like me nā kolamu i loko o ke keʻena.
4.Ceiling ma ka hale kūʻai. 5.Decorative kiʻi ma kekahi mau wahi leʻaleʻa.
Q16: Pehea ka lōʻihi e hiki ai iā ʻoe ke hōʻoiaʻiʻo no kēia huahana / hoʻopau?
A: Hōʻoia kala no nā makahiki he 10. Hiki i ka palapala hōʻoia waiwai kumu
e hoolakoia.
