Bakin Karfe Checker Plate - Madaidaici don matsananciyar mahalli
Takaitaccen Bayani:
Bakin karfe farantin karfeAn yi shi daga babban matakin bakin karfe, takarda ne na karfe wanda samansa yana da tsari mai ma'ana a gefe guda, don haka yana da fasalin anti-skid mai kyau, da babban bakin karfe, yana yin tir saboda juriya na lalata sosai. Zai iya ba da kyakkyawar jin ƙira ta zamani da kyawawan kaddarorin jiki da sinadarai. Don haka farantin lu'u-lu'u na bakin karfe galibi ana amfani da su a masana'antar abinci, gine-gine, dumama ruwa da kayan abinci.
Ƙayyadaddun bayanai
- Abu:Abubuwan gama gari sune 201, 202, 304, 304L, 316, 316L, 310S, 410, 410S, 430.
- Ƙarshen saman:2B don yin birgima, BA, HL, madubi, NO.1 na zafi mai zafi, NO.4, 8K.
- Nau'in:Tsarin lu'u-lu'u, ƙirar Lentil, ƙirar sanduna 5, ƙirar T.
- Kauri:0.3mm - 3mm don Cold Roll, 3mm - 12.5mm don Roll Hot.
- Nisa:10mm - 600mm don tsiri; 600-2000mm don takarda.
- Tsawon:2000mm - 6000mm.
| HADA KEMIKAL DA KAYAN KIRKI | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Daraja | C (Max) | Mn (Max) | P (Max) | S (Max) | Da (Max) | Cr | Ni | Mo | Nitrogen (Max) | Ku/ Wasu |
| 201 | 0.15 | 5.50-7.50 | 0.06 | 0.03 | 1 | 16.00-18.00 | 3.50-5.50 | - | 0.25 | |
| 202 | 0.15 | 7.50-10.00 | 0.06 | 0.03 | 1 | 17.00-19.00 | 4.00-6.00 | - | 0.25 | |
| 301 | 0.15 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 6.00 - 8.00 | - | 0.1 | - |
| 304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.00 - 20.00 | 8.00-10.50 | - | 0.1 | - |
| 304l | 0.03 | 2 | 0.045 | 0.03 | 1 | 18.00 - 20.00 | 8.00-12.00 | - | 0.1 | - |
| 310S | 0.08 | 2 | 0.045 | 0.03 | 1.5 | 24.00-26.00 | 19.00-22.00 | - | - | - |
| 316 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00-14.00 | 2.00 - 3.00 | 0.1 | - |
| 316l | 0.03 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00-14.00 | 2.00 - 3.00 | 0.1 | - |
| 316 Ti | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00 - 18.00 | 10.00-14.00 | 2.00 - 3.00 | 0.1 | Ti5x C Min |
| 317 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 18.00 - 20.00 | 11.00 - 14.00 | 3.00 - 4.00 | 0.1 | - |
| 317l | 0.03 | 2 | 0.045 | 0.03 | 0.75 | 18.00 - 20.00 | 11.00 - 15.00 | 3.00 - 4.00 | 0.1 | - |
| 321 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00 - 19.00 | 9.00 - 12.00 | - | 0.1 | Ti5x C Min |
| 347 | 0.08 | 2 | 0.045 | 0.03 | 0.75 | 17.00 - 19.00 | 9.00 - 13.00 | - | ||
SSCP-02:Bakin karfe farantin karfe tare da babban zagaye tsinkaya.
SSCP-03:Bakin karfe farantin karfe tare da ƙananan tsinkaya.
SSCP-04:Bakin karfe abin dubawa farantin tare da rabin ɗagawa zagaye tsinkaya.
SSCP-05:Bakin karfe farantin karfe tare da lebur da tsinkaya.
SSCP-06:Bakin karfe farantin karfe tare da tsinkayar digon ruwa.
SSCP-07:Bakin karfe farantin karfe tare da tasoshi mai siffar mazugi.
SSCP-08:Bakin karfe farantin karfe tare da babban hasashen shinkafa.
SSCP-09:Bakin karfe farantin karfe tare da tsinkayar lu'u-lu'u.Siffar
- High zafin jiki juriya.
- Juriya na lalata.
- Juriya na alkaline.
- Anti-tsatsa.
- Anti-skid.
- Dorewa da tsawon rai.
- Mafi ƙarancin kulawa.
SSCP-10:Bakin karfe abin duba farantin tare da tsinkaya fasali anti-skid.
SSCP-11:Bakin karfe farantin karfe tare da kyawawan bayyanar za a iya amfani dashi don ado.Aikace-aikace
- Ana amfani da farantin lu'u-lu'u na bakin karfe a duniya.
- Saboda halayen anti-skid, ana iya amfani da shi a cikin ƙasa mara kyau, matakan mota, matakan injiniya, shimfidar masana'antu da sauransu.
- Bakin karfe farantin karfe zai iya tsayayya da babban zafin jiki, don haka kuma ana iya amfani dashi a cikin injin dumama ruwa.
- Siffofin anti-lalata da maganin alkaline suna yin farantin lu'u-lu'u na bakin karfe da ke amfani da su a cikin dakin gwaje-gwaje, sinadarai, man fetur, masana'antar abinci da sauran wurare.
- Yana da tsawon rai, don haka yana iya yin iyakar kiyayewa a cikin rayuwar yau da kullun, yawanci ana amfani dashi a cikin ginin layin dogo.
- Wani muhimmin aikace-aikace shine kayan ado. Muna iya ganin su a gida, suna gina bangon labule da sauran wurare.
SSCP-12:Bakin karfe farantin da aka yi amfani da shi a cikin allon ƙafar mota.
SSCP-13:Bakin karfe farantin da aka yi amfani da shi a wurin bitar sinadarai.
Matsayin Material
| Kayan abu | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 4104 30S |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 316H, 310H, 310H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33251, S33523, 03, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS301S1, SUS301S 315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS40 SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Ƙayyadaddun samfur
| Gama | Kauri | Halaye | Aikace-aikace |
| Na 1 | 3.0mm ~ 50.0mm | An gama da zafi-birgima, annealing da pickling, halin da fari pickled surface | Chemical masana'antu kayan aiki, Masana'antu tankuna |
| Na 2B | 0.3mm ~ 6.0mm | An gama shi da maganin zafi, zazzagewa bayan mirgina sanyi, sannan layin wucewar fata ya zama mafi haske da santsi | Gabaɗaya Aikace-aikacen Medical Instruments, Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Maganin zafi mai haske bayan mirgina sanyi | Kayan dafa abinci, kayan dafa abinci, manufar gine-gine |
| Na 4 | 0.4mm ~ 3.0mm | Goge tare da lamba 150 zuwa lamba 180 abrasives. Mafi mashahuri ƙare | Madara & Wuraren sarrafa Abinci, Kayayyakin Asibiti, Baho |
| Na 8 | 0.5mm ~ 2.0mm | Filaye mai kama da madubi ta hanyar gogewa tare da mafi kyawun abrasives sama da raga 800 | Reflector, madubi, ciki- waje ado don gini |
| HL (Layin Gashi) | 0.4mm ~ 3.0mm | An gama shi ta hanyar ci gaba da goge baki | Manufofin gine-gine, escalators, motocin kayan abinci |
Haɗin Sinadari
| Daraja | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | 0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316 Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904l | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Sauran | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409l | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410l | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436l | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Mukunsa samfuran bakin karfe tare da takarda anti-tsatsa da zoben karfe don hana lalacewa.
Ana yiwa lakabin tantancewa bisa ga ƙayyadaddun ƙayyadaddun ƙayyadaddun bayanai ko umarnin abokin ciniki.
Ana samun fakiti na musamman gwargwadon buƙatun abokin ciniki.
Kunshin Bakin Karfe Nada
Bakin Karfe Sheet / Kunshin Bakin Karfe
Kunshin Bakin Karfe Strip
Kunshin jigilar kaya
Kamfaninmu yana dogara ne a Wuxi, yana tara birnin masana'antu bakin karfe a kasar Sin.
Mun ƙware a cikin bakin coils, zanen gado da faranti, bakin karfe da bututu da kayan aiki, bututun bakin karfe, da samfuran aluminum da samfuran tagulla.
Abokan cinikinmu daga Turai, Amurka, Gabas ta Tsakiya, Afirka da kudu maso gabashin Asiya sun yaba da samfuranmu. Za mu bayar da m kayayyakin da m sabis ga abokan ciniki.
Bakin Karfe Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 3, 3 0, 430F, 440, 440c,
Alloy Grade: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Karfe, M Karfe, Aluminium, Alloy Karfe, Carbon Karfe, Musamman Nickel Alloys
A cikin nau'i na: Zagaye Bars, Bars Square, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wayoyi, Wayoyin Waya, Sheets, Faranti, Bututu maras kyau, ERW Pipes, Flanges, Fittings, da dai sauransu.
Q1: Menene bakin ciki?
A: Bakin ƙarfe yana nufin babu alama a saman saman ƙarfe, ko nau'in ƙarfe wanda iska ko ruwa bai lalace ba kuma wanda baya canza launi, mara tabo, mai jurewa tabo, tsatsa, lalatar tasirin sinadarai.
Q2: Shin bakin karfe yana nufin babu tsatsa?
A: A'a, bakin karfe yana nufin ba sauƙin samun tabo ko tsatsa ba, yana da ikon iya tsayayya da tabo, tsatsa da lalata.
Q3: Kuna samar da zanen gado na bakin karfe?
A: Ee, muna samar da nau'ikan nau'ikan nau'ikan zanen karfe, tare da kauri daga 0.3-3.0mm. kuma a lokuta daban-daban.
Q4: Kuna yarda da yanke zuwa tsayin sabis?
A: Tabbas, gamsuwar abokin ciniki shine babban fifikonmu.
Q5: Idan ina da ƙaramin oda, kuna karɓar ƙaramin oda?
A: Ba matsala ba, damuwar ku ita ce damuwarmu, ana karɓar ƙananan yawa.
Q6: Ta yaya za ku iya tabbatar da ingancin samfurin ku?
A: Na farko, tun daga farko, mun riga mun aiwatar da ruhi zuwa tunaninsu, wato inganci ita ce rayuwa, kwararrun ma’aikatanmu da ma’aikatanmu za su bi kowane mataki har kayan sun cika da kyau kuma a fitar da su.
Q7: Za ku shirya samfuran?
A: Masu sana'a suna yin ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun, muna da nau'ikan tattarawa daban-daban na zaɓi ga abokan ciniki, ɗayan tattalin arziki ko mafi kyau.
Q8: Menene kuke buƙatar sani daga abokin ciniki kafin ingantaccen zance?
A: Don ingantacciyar magana, muna buƙatar sanin daraja, kauri, girman, ƙarewar saman, launi da adadin odar ku, da kuma maƙasudin kayan. Za a buƙaci ƙarin bayanin samfur na musamman, kamar zane, shimfidawa da tsari. Sa'an nan kuma za mu ba da magana mai gasa tare da bayanin da ke sama.
Q9: Wane irin wa'adin biyan kuɗi kuka karɓa?
A: Mun yarda da T/T, West union, L/C.
Q10: Idan wannan ƙaramin oda ne, za ku isar da kayan ga wakilinmu?
A: Ee, an haife mu ne don magance matsalolin abokan cinikinmu, za mu sami kayan cikin aminci zuwa ɗakin ajiyar wakilin ku kuma mu aiko muku da hotuna.
Q11: Shin kuna yin lebur kawai? Ina so in yi ƙage don sabon aikina.
A: A'a, mu yafi samar da bakin karfe lebur takardar surface jiyya, a lokaci guda, mu tsirar musamman karfe ƙãre samfurin kamar yadda ta abokin ciniki ta zane da kuma shirin, mu m zai kula da sauran.
Q12: Katuna nawa kuka riga kuka fitar dashi?
A: Ana fitar dashi zuwa kasashe sama da 50 musamman daga Amurka, Rasha, UK, Kuwait, Masar, Iran,
Turkiyya, Jordan, da dai sauransu.
Q13: Ta yaya zan iya samun wasu samfurori?
A: Ƙananan samfurori a cikin kantin sayar da kayayyaki kuma suna iya samar da samfurori kyauta. Catalgue yana samuwa, mafi yawa
alamu muna da shirye samfurori a hannun jari. Samfurori na musamman zasu ɗauki kimanin kwanaki 5-7.
Q14: Menene isarwa?
A: Misalin odar lokacin isarwa shine kwanaki 5-7. Umarnin kwantena kusan kwanaki 15-20 ne.
Q15: Menene aikace-aikacen game da samfuran ku?
A: 1.elevator kofa/ cabin ko da bangon gefen escalator.
2.Rufe bango ciki ko waje dakin taro/gidan cin abinci.
3.Facade a lokacin da ake cladding a kan wani abu, kamar ginshiƙai a cikin harabar gidan.
4.Rufi a babban kanti. 5.Ado zana a wasu wuraren nishadi.
Q16: Har yaushe Zaku iya Ba da garantin Wannan samfur/Kammala?
A: Garanti mai launi fiye da shekaru 10. Takaddun ingancin kayan asali na iya
a bayar.
