TP347H Bakin karfe sumul bututu ne daban-daban da TP347 bakin karfe sumul bututu.
Waɗannan buƙatun daban-daban suna ba da ƙarfi mai ƙarfi-karye fiye da yadda ake iya samun su a cikin maki iri ɗaya ba tare da waɗannan buƙatu daban-daban ba. Grade TP347HFG bakin karfe sumul bututu za a yi sanyi gama.
TP347H bakin karfe bututu mara nauyi za a sake mai da shi zuwa ƙayyadadden zafin jiki na magani na lokacin da ake buƙata kafin quenching.
Ana amfani da bututun ASTM A213 TP347H sosai a masana'antar mai da sinadarai, fasahar nukiliya, da masana'antar yin tukunyar jirgi.
Muna samarwa da ƙera TP347H bakin ƙarfe mara ƙarfi bututu tare da girman girman girman, daga 10.0mm zuwa 1219mm. The bango kauri na TP347H bakin karfe bututu jeri daga 0.5mm zuwa 100mm. Tsawon gama gari na kowane bututu shine 5.8m, 6.0m, 11.8m, 12m.
Matsakaicin tsayin da muke samarwa shine har zuwa 18m. Sheye Metal na iya samar da bututun bakin karfe na TP347H daidai da daidaitattun ASTM, EN, JIS, DIN don biyan buƙatun abokin ciniki daban-daban.
ASME SA213 TP347H bututu shine mafi yawan samfur. TP347H Bakin bututu maras sumul za a iya yanke zuwa girman da bututu tare da goge gama shi ma akwai.
Ayyukan sarrafawa da yawa, gami da naushi, fenti, beveling, chamfering duk suna nan a gare mu. Tare da ƙarfin fasaha b, kayan aiki na gaba da ƙwararrun ƙwararrun sana'a,
Wuxi Cepheus na iya kera bututun TP347H tare da inganci mai kyau. Don karfe, muna da gaske.
| Ƙayyadaddun bayanai | |
| Girman | OD: 10.0 ~ 1219mm; Aminiya: 0.5 ~ 100mm; Tsawon: 5.8m, 6m, 11.8m, 12m, Max.18m |
| Tsari | Mara sumul, Sanyi Janye, Sanyi Birgima, Mai zafi mai zafi |
| Sunan Daban | 1.4961 Bututu Bakin Karfe X8CrNiNb16-13 Bututu Bakin Karfe UNS S34709 Bakin Karfe Bututu mara kyau TP347H Bakin Karfe Boiler Tubes TP347H Bakin Karfe Super Hita Tubes |
| Ƙarshe | PE (Plain End), BE (Beveled End), NPT, BW (Butt Weld End) |
| Surface | Ɗaukar taimako, goge-goge, goge-goge, tsince babu sikeli. Lokacin da aka yi amfani da annealing mai haske, pickling ba lallai ba ne. |
| Daidaitawa | ASTM A312, ASTM A213, EN10216-5, DIN 17456, DIN 17458, JIS G3459, JIS G3463 |
| Nauyin Ka'idar (kg/m) | Nauyi/mita = (OD-WT)*WT*0.02507DukaODkumaWTku mm. |
Lura:
OD shine ƙayyadadden diamita na waje.
WT shine ƙayyadadden kauri na bango
Bututun bakin karfe za a tsince su ba tare da sikeli ba. Lokacin da aka yi amfani da annealing mai haske, pickling ba lallai ba ne.
Za a samar da ƙorafin da aka yanke kuma an cire su. Idan ana son ƙarshen zaren zaren ko ƙare don waldawa, ba da cikakkun bayanai.
Haɗin Sinadari
| Daraja | Tsarin UNS | C,% (Max) | Mn,% Max | P,% Max | S,% Max | Si,% Max | Cr,% | Ni,% | N,% Max |
| Saukewa: TP347 | S34700 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-20.0 | 9.0-13.0 | 10xC-1.10 |
| Saukewa: TP347H | S34709 | 0.04-0.10 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-19.0 | 9.0-13.0 | 8xC-1.10 |
| Saukewa: TP347HFG | S34710 | 0.06-0.10 | 2.00 | 0.045 | 0.030 | 1.00 | 17.0-19.0 | 9.0-13.0 | 8xC-1.10 |
Bukatar Maganin zafi
| Daraja | Tsarin UNS | Nau'in Maganin Zafi | Austenitizing / Magance Zazzabi, min ko kewayo ℃ | Mai sanyaya Labarai |
| Saukewa: TP347 | S34700 | Magani Magani | 1040 | Ruwa ko wani Saurin Cool |
| Saukewa: TP347H | S34709 | Magani Magani | Sanyi Aiki:1100; Saukewa: 1050 | Ruwa ko wani Saurin Cool |
| Saukewa: TP347HFG | S34710 | Magani Magani | 1175 | Ruwa ko wani Saurin Cool |
Kayayyakin Injini
| Daraja | Tsarin UNS | Ƙarfin Ƙarfin Ƙarfi Min, MPa | Ƙarfin Haɓaka, min, MPa | Tsawaita cikin 2 in. ko 50mm, min, % | Hardness, Max | |
| Brinell/Vickers | Rockwell | |||||
| Saukewa: TP347 | S34700 | 515 | 205 | 35 | 192HBW/200HV | 90HRB |
| Saukewa: TP347H | S34709 | 515 | 205 | 35 | 192HBW/200HV | 90HRB |
| Saukewa: TP347HFG | S34710 | 550 | 205 | 35 | 192HBW/200HV | 90HRB |
ASME SA213 TP47H Bakin Karfe Haƙuri da Bututu
Haƙuri a cikin Kaurin bango
| Haƙuri a cikin Kaurin bangoA | ||||||||
| Diamita na waje mm | 2.4mm da ƙasa | Sama da 2.4mm zuwa 3.8mm, gami da. | Sama da 3.8mm zuwa 4.6mm, gami da. | Fiye da 4.6mm | ||||
| Ƙarshe | Karkashin | Ƙarshe | Karkashin | Ƙarshe | Karkashin | Ƙarshe | Karkashin | |
| Bututun da ba su da ƙarfi, Ƙafafun da aka Ƙare | ||||||||
| 100mm da ƙasa | 40 | 0 | 35 | 0 | 33 | 0 | 28 | 0 |
| Fiye da 100mm | … | … | 35 | 0 | 33 | 0 | 28 | 0 |
| Bututun da ba su da ƙarfi, Ƙarƙashin sanyi | ||||||||
| Ƙarshe | Karkashin | |||||||
| 38.1mm da ƙasa | 20 | 0 | ||||||
| Fiye da 38.1mm | 22 | 0 | ||||||
| Welded Bututu | ||||||||
| Duk Girma | 18 | 0 | ||||||
Haƙuri a Waje Diamita
| Ƙayyadaddun Diamita na Waje, mm | Hakuri, mm | |
| Ƙarshe | Karkashin | |
| Bututun da Aka Kammala Zafi | ||
| 100 ko kasa | 0.4 | 0.8 |
| Fiye da 100 zuwa 200.Incl. | 0.4 | 1.2 |
| Sama da 200 zuwa 225, inc. | 0.4 | 1.6 |
| Bututu masu walda da bututun da ba su da sanyi da sanyi | ||
| Kasa da 25 | 0.1 | 0.11 |
| 25 zuwa 40, inc. | 0.15 | 0.15 |
| Sama da 40 zuwa 50, excl. | 0.2 | 0.2 |
| 50 zuwa 65, ban da. | 0.25 | 0.25 |
| 65 zuwa 75, ban da. | 0.3 | 0.3 |
| 75 zuwa 100, incl. | 0.38 | 0.38 |
| Sama da 100 zuwa 200, gami da. | 0.38 | 0.64 |
| Sama da 200 zuwa 225, inc. | 0.38 | 1.14 |
Haƙuri a Tsawon
| Hanyar Kera | Ƙayyadaddun Diamita na Waje, mm | Tsawon Tsawon, mm | |
| Ƙarshe | Karkashin | ||
| M, zafi-ƙare | Duk masu girma dabam | 5 | 0 |
| Mara kyau, an gama sanyi | Kasa da 50.8 | 3 | 0 |
| Welded | 50.8 ko fiye | 5 | 0 |
| Kasa da 50.8 | 3 | 0 | |
| 50.8 ko fiye | 5 | 0 | |
Gwaji na TP347/H/HFG Bakin Karfe Bututu maras sumul
1.Nazarin Kimiyya
2.Mechanical Properties
2.1 Bukatun Tensile
2.2 Bukatar Tauri
2.3 Gwajin Lalacewa
2.4 Gwajin Hatsari
3.Hydrostatic Test ko Nondestructive Electric Test
Babban Jerin Kayan Gwaji
| A'a. | Sunan Kayan aiki | Babban Bayani | Daidaito |
| 1 | HF Infrared Carbon-sulfur Analyzer HIR-944B | C: 0.0001% -10.0000%; S: 0.0001-0.3500% | 0.1 pmm |
| 2 | Mai gani-Infrared Spectrometer HC-2 | 330-820 | ± 2nm |
| 3 | Nitrogen Oxygen Analyzer EMGA-620W | O: 0-0.1wt%; N: 0-0.5wt% | ≤1.0pm |
| 4 | Spectrometer mai karanta kai tsaye SPECTRO MAXx06 | C, Si, Mn, P, S, Cr, Mo, Ni, Al, Co, Cu, Nb, Ti, V, W, Pb, Sn, Mg, As, Zr, Bi, Ca, Ce, Sb, Se, Ta, Te, B, Zn, La, N, Fe | 0.001% |
| 5 | OBLF Spectrometer mai karanta kai tsaye GS1000 | Ti, V, C, P, S, Cu, Sn, Cr, Mn, Ni, Mo, Co, B, W, Nb, Al, Si | 0.001% |
| 6 | Spectrometer mai karanta kai tsaye na Hannu XSORT | Ti, V, Cu, Sn, Cr, Mn, Ni, Mo, Pb, Co, W, Zn, Nb,… | - |
| 7 | Gwajin Ruwa na Duniya WE-600C | 0-600KN | Darasi na 1.0 |
| 8 | Microcomputer Hydraulic Universal Testing Machine CHT-4605 | 0-600KN | Darasi na 1.0 |
| 9 | Na'urar Gwajin Tasirin JB-300B/JB-W300B | 0-300KN (min -196 ℃) | 2J ± 0.1 ℃ |
| 10 | Gwajin Hardness Leeb TH-160 TH110 | 0-1045 HL | ± 1 HL |
| 11 | Micro Vickers MHV-1000 | (200-300) HV0.05; (400-500)HV0.1; (700-800) HV0.2; (700-800) HV0.5 HV1 | ± 5.0%; ± 4.0%; ± 4.0%; ± 3.0%; ± 3.0%; |
| 12 | Low Load Vickers Hardness Gwajin HV-10A | 49.03-980N | - |
| 13 | Mai gwada Brinell Hardness HB-3000B-1 | 8-650HBW | - |
| 14 | Rockwell Hardness Gwajin HR-150A-I | 20-88HRA; 20-100HRB; 20-70HRC | 0.5 |
| 15 | Binciken Metallographic 4XC; Saukewa: PXS-1020 | 50X-1000X; 10X/20X | - |
| 16 | Mitar Roughness na Hannu TR210 | ≤160 μm | ± 10% |
| 17 | Ruwa-bath HH-501 | RT-100 ℃ | ± 0.5 ℃ |
| 18 | 16 Channel Ultrasonic Testing Machine CTB-108, X2 | 120-830mm | C5 |
| 19 | 8 Channel Ultrasonic Testing Machine CTB-108 | 14-114 mm | C5 |
| 20 | Biyu Channel Ultrasonic Testing Machine CUT-2A | 0-100 db | 1 db ku |
| 21 | Na'urar Gwajin Ultrasonic CTS-23/CTB106/CUT512G | φ89-508mm; φ14-114mm; 0-100 db | C5; C5; 1 db ku |
| 22 | Eddy Current Flaw Detector ECT-308;ECT-306E;IDEA-4D; G-8B; Saukewa: ET-910B | φ10-89mm, φ89-168mm; φ219-1200mm; 10-10MHz, 0-99db; 14-114 | A; -; A; A; A |
| 23 | Injin Gwajin Hydrostatic φ10-133mm; φ133-610mm; φ630-1500mm | 30MPa; 30MPa; 50MPa; | - |
| 24 | Mai gano X-ray XY2515; HK320; XYD225 | WT≤50mm; WT≤50mm; WT≤20mm; | - |
| 25 | Mai gano Bidiyo na X-ray XYD225 | WT≤8mm | - |
| 26 | Ultrasonic Flaw Detector (Welded) SPUT | Od: 168-1200mm; Aminiya:3-40MM; L: 4-12.5m | - |
Reference Projects game da
| Abokan ciniki | Sunan aikin | Ƙayyadaddun bayanai |
| Kudin hannun jari Donfang Boiler Group Co.,Ltd | - | ASME SA213 TP347H bututu 63.5*5.5mm, 76*4.5mm, 51*8mm, 60*8.5mm, 50.8*9mm, 45*8.5mm, 57*4.5mm, 60*4mm, 48*7.5mm, 550.8* ASME SA213 TP347H bututu 45*8.09mm, 45*9.2mm, 50.8*3.5mm, 50.8*9.2mm |
| Abubuwan da aka bayar na Shanghai Boiler Works Ltd | - | JWBX/SG-X001-2010 TP347H bututu 41.3*8.5mm, 47.6*7.5mm, 63.5*5.5mm, 48*7.5mm, 51*4mm, 57.2*9mm, 18*8mm, 60*9mm 1106MT |
| Harbin Boiler Company Limited girma | 300MW, 600MW Wutar Haɗa Wuta | ASME SA213 TP347H Pipe 22*4mm, 54*9mm, 57*9mm, 63*4mm |
| Babcock & Wilcox Beijing Company Limited girma | - | ASTM A213 TP347H bututu 16*3mm, 52*7mm, 57*5mm, 44.5*8mm, 51*8.5mm, 60*5mm |
| Kamfanin SINOPEC Maoming | Ton 1800000 / shekara Kakin Kakin Ruwan Ruwan Ruwa mai zafi mai zafi mai zafi | ASTM A213 TP347H Pipe 168.3*12*9000mm |
| Petrochina Karamay Petrochemical Company | 1200000Tons / shekara Diesel Oil Hydrogenation Unit | ASTM A213 TP347 Pipe193.7*14.27mm, 168.3*12.7mm |
Bayanin tattarawa
TP347/H/HFG Bakin karfe bututu daga Wuxi Cepheus an cika su bisa ga buƙatun abokin ciniki. Don guje wa duk wani lahani da za a iya haifar yayin sufuri na ƙasa da ƙasa, muna ba da wasu hanyoyin marufi na zaɓi, gami da saƙan jakunkuna, buhunan katako, da akwatunan katako.
Lokacin aikawa: Maris 21-2024