Monel 400 Nickel Alloy | Nickel-Copper Monel 400
Takaitaccen Bayani:
Monel 400 Nickel Alloy | Nickel-Copper Monel 400
Monel 400ni anickel-copper gami(kimanin 67% Ni - 23% Cu) wanda ke da tsayayya ga ruwan teku da tururi a yanayin zafi mai zafi da gishiri da mafita.Alloy 400shi ne ƙaƙƙarfan alloy ɗin mafita wanda kawai za a iya taurare ta aikin sanyi. Wannan nickel gami yana nuna halaye kamar kyakkyawan juriya na lalata, kyakkyawan walƙiya da ƙarfi mai ƙarfi. Ƙarƙashin ƙarancin lalacewa a cikin sauri mai gudana brackish ko ruwan teku hade tare da kyakkyawan juriya ga damuwa-lalata a cikin mafi yawan ruwa mai dadi, da juriya ga nau'o'in lalacewa iri-iri ya haifar da amfani da yawa a cikin aikace-aikacen ruwa da sauran abubuwan da ba su da oxidizing chloride. Wannan sinadarin nickel yana da juriya musamman ga hydrochloric da hydrofluoric acid lokacin da aka cire su. Kamar yadda za a sa ran daga babban abun ciki na jan karfe, gami400nitric acid da tsarin ammonia suna kai hari cikin sauri.
Monel 400 yana da manyan kayan aikin injiniya a yanayin zafi na ƙasa, ana iya amfani dashi a cikin yanayin zafi har zuwa 1000 ° F, kuma wurin narkewa shine 2370-2460 ° F. Duk da haka, alloy 400 yana da ƙarancin ƙarfi a cikin yanayin da aka rufe don haka, nau'ikan fushi iri-iri. ana iya amfani dashi don ƙara ƙarfi.
Akwai Samfura
- Shet
- Plate
- Bar
- Bututu & Tube (welded & sumul)
- Kayan aiki (watau flanges, slip-ons, blinds, weld-wuyoyin, lapjoints, dogayen wuyan walda, welds socket, gwiwar hannu, tees, stub-ends, returns, caps, crosses, reducers, and tubes)
- Waya
Menene halayen Monel 400?
- Mai jure wa ruwan teku da tururi a yanayin zafi mai yawa
- Kyakkyawan juriya ga ruwa mai saurin gudu ko ruwan teku
- Kyakkyawan juriya ga lalatawar damuwa a yawancin ruwan ruwa
- Musamman juriya ga hydrochloric da hydrofluoric acid lokacin da aka cire su
- Yana ba da ɗan juriya ga hydrochloric acid da sulfuric acid a matsakaicin yanayin zafi da yawa, amma ba safai ba ne kayan zaɓi na waɗannan acid.
- Kyakkyawan juriya ga tsaka tsaki da gishiri na alkaline
- Juriya ga chloride ya haifar da lalatawar damuwa
- Kyawawan kaddarorin injina daga yanayin zafi mara nauyi har zuwa 1020F
- Babban juriya ga alkalis
Haɗin Sinadari, %
| C | Mn | S | Si | Ni | Cu | Fe |
|---|---|---|---|---|---|---|
| .30 max | 2.00 max | .024 max | .50 max | 63.0 min | 28.0-34.0 | 2.50 max |
Lalata Resistant Monel 400
Alloy 400kusan ba shi da kariya ga lalatawar ion chloride a cikin yanayi na yau da kullun. Gabaɗaya, juriyarsa na lalata yana da kyau sosai wajen rage mahalli, amma rashin ƙarfi a cikin yanayin oxidizing. Ba shi da amfani a cikin oxidizing acid, kamar nitric acid da nitrous. Duk da haka, yana da juriya ga mafi yawan alkalis, gishiri, ruwa, kayan abinci, kwayoyin halitta da yanayin yanayi a al'ada da yanayin zafi.
Ana kaiwa wannan gawa ta nickel hari a cikin iskar sulfur sama da kusan 700°F da narkakkar sulfur yana kai hari akan gami a yanayin zafi sama da 500°F.
Monel 400 yana ba da kusan juriya iri ɗaya kamar nickel amma tare da matsakaicin matsakaicin matsi na aiki da yanayin zafi kuma a cikin ƙananan farashi saboda mafi girman ƙarfin injinsa.
A waɗanne aikace-aikace ake amfani da Monel 400?
- Injiniyan ruwa
- Kayan aikin sarrafa sinadarai da hydrocarbon
- Gasoline da tankunan ruwa
- Tushen danyen mai
- De-aerating heaters
- Boiler yana ciyar da dumama ruwa da sauran masu musayar zafi
- Valves, famfo, shafts, kayan aiki, da fasteners
- Masu musayar zafi na masana'antu
- Chlorinated kaushi
- Hasumiyar distillation na danyen mai
Kerawa tare da Monel 400
Alloy 400 za a iya sauƙaƙe ta hanyar iskar gas-tungsten, baka na ƙarfe na gas ko matakan kariya na ƙarfe ta amfani da karafa masu dacewa. Babu buƙatar magani mai zafi bayan walda, duk da haka, tsaftacewa sosai bayan waldawa yana da mahimmanci ga mafi kyawun juriya na lalata, in ba haka ba akwai haɗarin kamuwa da cuta da ɓarna.
Za'a iya samar da ƙayyadaddun ƙirƙira zuwa nau'ikan kayan aikin injina lokacin da ingantaccen iko na yawan aiki mai zafi ko sanyi da zaɓin jiyya na thermal masu dacewa.
Kamar yawancin sauran abubuwan nickel, Monel 400 yawanci yana da wahala ga injin kuma zai yi aiki tuƙuru. Koyaya, ana iya samun kyakkyawan sakamako idan kun yi zaɓin da ya dace don kayan aiki da machining.
Matsayin Material
| Kayan abu | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 4104 30S |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 316H, 309H, 316H, 309H, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S312S3026 S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S332205, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S2S SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS3131JUS SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430LX, SUS43SUS40 SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1 |
Ƙayyadaddun samfur
| Gama | Kauri | Halaye | Aikace-aikace |
| Na 1 | 3.0mm ~ 50.0mm | An gama da zafi-birgima, annealing da pickling, halin da fari pickled surface | Chemical masana'antu kayan aiki, Masana'antu tankuna |
| Na 2B | 0.3mm ~ 6.0mm | An gama shi da maganin zafi, zazzagewa bayan mirgina sanyi, sannan layin wucewar fata ya zama mafi haske da santsi | Gabaɗaya Aikace-aikacen Medical Instruments, Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Maganin zafi mai haske bayan mirgina sanyi | Kayan dafa abinci, kayan dafa abinci, manufar gine-gine |
| Na 4 | 0.4mm ~ 3.0mm | Goge tare da lamba 150 zuwa lamba 180 abrasives. Mafi mashahuri ƙare | Madara & Wuraren sarrafa Abinci, Kayayyakin Asibiti, Baho |
| Na 8 | 0.5mm ~ 2.0mm | Filaye mai kama da madubi ta hanyar gogewa tare da mafi kyawun abrasives sama da raga 800 | Reflector, madubi, ciki- waje ado don gini |
| HL (Layin Gashi) | 0.4mm ~ 3.0mm | An gama ta hanyar ci gaba da goge baki | Manufofin gine-gine, escalators, motocin kayan abinci |
Haɗin Sinadari
| Daraja | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | 0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316 Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904l | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Sauran | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409l | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410l | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436l | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Mukunsa samfuran bakin karfe tare da takarda anti-tsatsa da zoben karfe don hana lalacewa.
Ana yiwa lakabin tantancewa bisa ga ƙayyadaddun ƙayyadaddun ƙayyadaddun bayanai ko umarnin abokin ciniki.
Ana samun fakiti na musamman gwargwadon buƙatun abokin ciniki.
Kunshin Bakin Karfe Nada
Bakin Karfe Sheet / Kunshin Bakin Karfe
Kunshin Bakin Karfe Strip
Kunshin jigilar kaya
Kamfaninmu yana dogara ne a Wuxi, yana tara birnin masana'antu bakin karfe a kasar Sin.
Mun ƙware a cikin bakin coils, zanen gado da faranti, bakin karfe da bututu da kayan aiki, bututun bakin karfe, da samfuran aluminum da samfuran tagulla.
Abokan cinikinmu daga Turai, Amurka, Gabas ta Tsakiya, Afirka da kudu maso gabashin Asiya sun yaba da samfuranmu. Za mu bayar da m kayayyakin da m sabis ga abokan ciniki.
Bakin Karfe Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 3, 7 420, 430, 430F, 440, 440c,
Alloy Grade: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Karfe, M Karfe, Aluminium, Alloy Karfe, Carbon Karfe, Musamman Nickel Alloys
A cikin nau'i na: Zagaye Bars, Bars Square, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wayoyi, Wayoyin Waya, Sheets, Faranti, Bututu maras kyau, ERW Pipes, Flanges, Fittings, da dai sauransu.
Q1: Menene bakin ciki?
A: Bakin ƙarfe yana nufin babu alama a saman saman ƙarfe, ko nau'in ƙarfe wanda iska ko ruwa bai lalace ba kuma wanda baya canza launi, mara tabo, mai jurewa tabo, tsatsa, lalatar tasirin sinadarai.
Q2: Shin bakin karfe yana nufin babu tsatsa?
A: A'a, bakin karfe yana nufin ba sauƙin samun tabo ko tsatsa ba, yana da ikon iya tsayayya da tabo, tsatsa da lalata.
Q3: Kuna samar da zanen gado na bakin karfe?
A: Ee, muna samar da nau'ikan nau'ikan nau'ikan zanen karfe, tare da kauri daga 0.3-3.0mm. kuma a lokuta daban-daban.
Q4: Kuna yarda da yanke zuwa tsayin sabis?
A: Tabbas, gamsuwar abokin ciniki shine babban fifikonmu.
Q5: Idan ina da ƙaramin oda, kuna karɓar ƙaramin oda?
A: Ba matsala ba, damuwar ku ita ce damuwarmu, ana karɓar ƙananan yawa.
Q6: Ta yaya za ku iya tabbatar da ingancin samfurin ku?
A: Na farko, tun daga farko, mun riga mun aiwatar da ruhi zuwa tunaninsu, wato inganci ita ce rayuwa, kwararrun ma’aikatanmu da ma’aikatanmu za su bi kowane mataki har kayan sun cika da kyau kuma a fitar da su.
Q7: Za ku shirya samfuran?
A: Masu sana'a suna yin ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun, muna da nau'ikan tattarawa daban-daban na zaɓi ga abokan ciniki, ɗayan tattalin arziki ko mafi kyau.
Q8: Menene kuke buƙatar sani daga abokin ciniki kafin ingantaccen zance?
A: Don ingantacciyar magana, muna buƙatar sanin daraja, kauri, girman, ƙarewar saman, launi da adadin odar ku, da kuma maƙasudin kayan. Za a buƙaci ƙarin bayanin samfur na musamman, kamar zane, shimfidawa da tsari. Sa'an nan kuma za mu ba da magana mai gasa tare da bayanin da ke sama.
Q9: Wane irin wa'adin biyan kuɗi kuka karɓa?
A: Mun yarda da T/T, West union, L/C.
Q10: Idan wannan ƙaramin oda ne, za ku isar da kayan ga wakilinmu?
A: Ee, an haife mu ne don magance matsalolin abokan cinikinmu, za mu sami kayan cikin aminci zuwa ɗakin ajiyar wakilin ku kuma mu aiko muku da hotuna.
Q11: Shin kuna yin lebur kawai? Ina so in yi ƙage don sabon aikina.
A: A'a, mu yafi samar da bakin karfe lebur takardar surface jiyya, a lokaci guda, mu tsirar musamman karfe ƙãre samfurin kamar yadda ta abokin ciniki ta zane da kuma shirin, mu m zai kula da sauran.
Q12: Katuna nawa kuka riga kuka fitar dashi?
A: Ana fitar dashi zuwa kasashe sama da 50 musamman daga Amurka, Rasha, UK, Kuwait, Masar, Iran,
Turkiyya, Jordan, da dai sauransu.
Q13: Ta yaya zan iya samun wasu samfurori?
A: Ƙananan samfurori a cikin kantin sayar da kayayyaki kuma suna iya samar da samfurori kyauta. Catalgue yana samuwa, mafi yawa
alamu muna da shirye samfurori a hannun jari. Samfurori na musamman zasu ɗauki kimanin kwanaki 5-7.
Q14: Menene isarwa?
A: Misalin odar lokacin isarwa shine kwanaki 5-7. Umarnin kwantena kusan kwanaki 15-20 ne.
Q15: Menene aikace-aikacen game da samfuran ku?
A: 1.elevator kofa/ cabin ko da bangon gefen escalator.
2.Rufe bango ciki ko waje dakin taro/gidan cin abinci.
3.Facade a lokacin da ake cladding a kan wani abu, kamar ginshiƙai a cikin harabar gidan.
4.Rufi a babban kanti. 5.Ado zana a wasu wuraren nishadi.
Q16: Har yaushe Zaku iya Ba da garantin Wannan samfur/Kammala?
A: Garanti mai launi fiye da shekaru 10. Takaddun ingancin kayan asali na iya
a bayar.
