Tube / Pìoba STEEL STAINLESS
Tuairisgeul goirid:
Tube / Pìoba STEEL STAINLESS
Tha na toraidhean Tube / Pìoba Stàilinn againn air an stòradh ann an grunn ìrean (a’ gabhail a-steach 316, 304, 310 agus 321) agus meudan.
-
Pìoba / Tube STEEL METRIC STAINLESS
San fharsaingeachd ann an 6.000 Meter faid agus mar as trice ann an ìrean T 304, T 310, T 316 Ìre T 321; Uile ann an raon farsaing de chrìochnaidhean.
6MM OD X 1MMTUIB NAN STAID
Tube gun staoin 8mm OD X 1mm
Tube gun staoin 8MM OD X 1.5mm
Tube gun staoin 10mm OD X 1mm
Tube gun staoin 10mm OD X 1.5mm
Tube gun staoin 12mm OD X 1mm
Tube gun staoin 15mm OD X 1mm
Tube gun staoin 15mm OD X 2mm
Tube gun staoin 16mm OD X 1.5mm
Tube gun staoin 16mm OD X 2mm
20MM OD X 1.6MM Tube gun staoin
20MM OD X 2MM Tube gun staoin
20MM OD X 3MM Tube gun staoin
22mm OD X 2MM Tube gun stain
25MM OD X 3MM Tube gun staoin
28MM OD X 2MM Tube gun stain
28MM OD X 3MM Tube gun stain
30MM OD X 1.5MM Tube gun staoin
Tube gun staoin 30mm OD X 2mm
38MM OD X 1MM Tube gun stain
38MM OD X Tube stainless 1.5MM
Tube gun staoin 38mm O/DX 2mm
40MM OD X 1.5MM Tube gun staoin
42.1MM OD X 2.8MM Tube gun staoin
48MM OD X Tube stainless 1.5MM
48.3MM OD X2MM Tube gun stain
50MM OD X 1.5MM Tube gun staoin
Tube gun staoin 50mm OD X 3mm
54MM OD X 1.22MM Tube gun staoin
60.3MM OD X Tube stainless 1.5MM
Tube gun staoin 60mm OD X 2mm
60MM OD X 3MM Tube stainless
84MM OD X 2MM Tube gun stain
89MM OD X 2MM Tube gun stain
Tube gun staoin 114mm OD X 3mm
Tube gun staoin 114mm OD X 6mm
129MM OD X 2MM Tube gun stain
139.7MM OD X 2MM Tube gun staoin
Tube gun staoin 150mm OD X 2mm
Tube gun staoin 154mm OD X 2mm
273MM OD X 25MM Tube gun stain
306MM OD X 3MM Tube gun stain
-
Pìoba / Tube STEEL STAINLESS IMPERIAL
San fharsaingeachd ann am faid 6.000 meatair agus gu cumanta ann an ìrean T 304, T 310, T 316 & Ìre T 321; Uile ann an raon farsaing de chrìochnaidhean
1/8 ″ OD X 20SWG Tube gun staoin
3/16 ″ OD X 20SWG Tube stainless
1/4 ″ OD X 18SWG Tube gun staoin
3/8 ″ OD X 16SWG Tube gun staoin
3/8 ″ OD X 20SWG Tube stainless
1/2 ″ OD X 18SWG Tube gun staoin
1/2 ″ OD X 16SWG Tube gun staoin
1/2 ″ OD X 20SWG Tube gun staoin
1/2 ″ OD X 14SWG Tube gun staoin
Tube gun staoin 17/32 ″OD X 10SWG
5/8 ″ OD X 18SWG Tube gun staoin
5/8 ″ OD X 16SWG Tube gun staoin
5/8 ″ OD X 20SWG Tube gun staoin
3/4 ″ OD X 18SWG Tube gun staoin
3/4 ″ OD X 16SWG Tube gun staoin
3/4 ″ OD X 20SWG Tube stainless
3/4 ″ OD X 14SWG Tube gun staoin
3/4 ″ OD X 10SWG Tube gun staoin
7/8 ″ OD X 18SWG Tube gun staoin
7/8 ″ OD X 16SWG Tube gun staoin
1 ″ OD X 16SWG Tube gun staoin
1 ″ OD X 12SWG Tube gun staoin
1 ″ OD X 14SWG Tube gun staoin
1 ″ OD X 10SWG Tube gun staoin
1.1/8 ″ OD X 16SWG Tube gun staoin
1 1/4 ″ OD X 16SWG Tube stainless
Tube gun staoin 1 1/4 ″ OD X 10SWG
Tube gun staoin 1.3/8 ″ OD X 16SWG
1 1/2 ″ OD X 16SWG Tube gun staoin
1 1/2 ″ OD X 14SWG Tube gun staoin
Tube gun staoin 1 1/2 ″ OD X 10SWG
1 5/8 ″ OD X 16SWG Tube gun staoin
1 3/4 ″ OD X 16SWG Tube stainless
Tube gun staoin 1 3/4 ″ OD X 10SWG
2 ″ OD X 14SWG Tube gun staoin
2 ″ OD X 16SWG Tube gun staoin
2 ″ OD X 2mm tiùb gun staoin
2 ″ OD X 3MM tube gun staoin
2.1/4 ″ OD X 1.5MM Tube gun staoin
2.1/2 ″ OD X 16SWG Tube stainless
2.1/2 ″ OD X 14SWG Tube gun staoin
2.1/2 ″ OD X 1/4 ″ Tube gun bhalla
2 3/4 ″ OD X 16SWG Tube stainless
3 ″ OD X 16SWG Tube gun staoin
Tube gun staoin 3 ″ OD X 2mm
Tube gun staoin 3 ″ OD X 10SWG
3.1/2 ″ OD X 16SWG Tube gun staoin
4 ″ OD X 16SWG Tube gun staoin
4 ″ OD X 2mm tiùb gun staoin
4 ″ OD X 3MM tiùb gun staoin
5 ″ OD X Tube gun staoin 1.5mm
-
TUBE BOOR NOMINAL STAINLESS
1/8 ″ nb SCH.80 Tube gun staoin
1/4 ″NB X SCH.10 Tube gun stain
1/4 ″nb X SCH.40 Tube gun stain
1/2 ″ NB SCH.40 Tube gun staoin
1/2 ″ nb SCH.80 Tube gun staoin
1/2 ″ NB SCH.160 Tube gun staoin
3/4 ″NB X SCH.10 Tube gun stain
3/4 ″nb X SCH.40 Tube gun stain
1 ″nb SCH.5 Tiùb gun staoin
1 ″nb SCH.10 Tube gun stain
1 ″nb SCH.40 Tube gun stain
1 ″nb SCH.80 Tube gun stain
1.1/4 ″ NB SCH.5 Tube gun staoin
1.1/4 ″ NB SCH.10 Tube gun staoin
1.1/4 ″ NB SCH.40 Tube gun staoin
1.1/4 ″ NB SCH.160 Tube gun staoin
1.1/2 ″NB SCH.5 Tiùb gun staoin
1.1/2 ″NB SCH.10 Tube gun stain
1.1/2 ″NB SCH.40 Tube gun staoin
1.1/2 ″NB SCH.80 Tube gun staoin
2 ″ nb SCH.5 Tube gun staoin
2 ″ NB SCH.10 Tube gun staoin
2 ″ nb SCH.40 Tube gun staoin
2 ″ nb SCH.80 Tube gun staoin
2 ″ NB SCH.160 Tube gun staoin
2.1/2 ″ NB SCH.10 Tube gun staoin
3 ″ NB SCH.10 Tube gun staoin
3 ″ n. SCH.40 Tube gun staoin
3.1/2 ″ NB SCH.10 Tube gun staoin
4 ″ n. SCH.10 Tube gun staoin
5 ″ n. SCH.40 Tube gun staoin
6 ″ NB SCH.10 Tube gun staoin
6 ″ nb SCH.80 Tube gun staoin
8 ″ n. SCH.10 Tube gun staoin
10 ″ NB SCH.10 Tube gun staoin
AIRSON TUILLEADH FIOSRACHAIDH, CUIDEACHADH NO COMHAIRLE AN-ASGAIDH, cuir fios thugainn TODA
Ìre stuthan
| Stuth | ASTM A240 àbhaisteach | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 409 410 410S |
| ASTM A480 àbhaisteach | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 3193H, H 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S333325, S333251 03, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Coitcheann | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316 / 316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 àbhaisteach | SUS 301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS304, SUS311S, SUS311S 315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L, SUS 317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3JL, SUS40L, SUS329J3JL, SUS32L SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Sònrachadh Bathar
| Crìochnaich | Tigheadas | Caractaran | Iarrtasan |
| Chan eil 1 | 3.0mm ~ 50.0mm | Crìochnaichte le roiligeadh teth, annealing agus picilte, air a chomharrachadh le uachdar geal picilte | Uidheam gnìomhachas ceimigeach, Tancaichean gnìomhachais |
| Àir. 2B | 0.3mm ~ 6.0mm | Crìochnaichte le làimhseachadh teas, picilte às deidh rolaigeadh fuar, air a leantainn le loidhne pas craiceann gus a bhith nas gile agus uachdar rèidh | Innealan Meidigeach Iarrtas Coitcheann, Bathar-bùird |
| Chan eil. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Làimhseachadh teas soilleir às deidh roiligeadh fuar | Inneal cidsin, bathar cidsin, adhbhar ailtireachd |
| Àir 4 | 0.4mm ~ 3.0mm | Snasadh le sgrìoban mogal Àir 150 gu No.180. Na crìochnachaidhean as mòr-chòrdte | Goireasan giullachd Bainne & Bidhe, Uidheam Ospadail, Bath-tub |
| Àir. 8 | 0.5mm ~ 2.0mm | Uachdar meòrachail coltach ri sgàthan le bhith a’ lìomhadh le sgrìoban nas grinne thairis air 800 mogal | Reflector, Sgàthan, Taobh a-staigh - Sgeadachadh taobh a-muigh airson togail |
| HL (Hair Line) | 0.4mm ~ 3.0mm | Crìochnaichte le snasadh sreathach leantainneach | Adhbharan ailtireachd, sreapadan, carbadan bathar cidsin |
Co-dhèanamh ceimigeach
| Ìre | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304h | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316h | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Eile | - | - | - | - | - |
| Monail 400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
sinnpaisg na toraidhean stàilinn gun staoin le pàipear anti-meirge agus fàinneachan stàilinn gus casg a chuir air milleadh.
Tha bileagan aithneachaidh air an tagadh a rèir sònrachadh àbhaisteach no stiùireadh teachdaiche.
Tha pacadh sònraichte ri fhaighinn a rèir riatanas luchd-ceannach.
Pasgan coil stàilinn gun staoin
Duilleag stàilinn gun staoin / pacaid plàta stàilinn gun staoin
Pasgan stiallan stàilinn gun staoin
Pasgan giùlain
Tha a’ chompanaidh againn stèidhichte ann an Wuxi, a’ cruinneachadh baile mòr de stàilinn gun staoin ann an Sìona.
Bha sinn a’ speisealachadh ann an corailean gun staoin, siotaichean agus truinnsear, pìoban stàilinn gun staoin, pìoban stàilinn gun staoin, agus cuideachd toraidhean alùmanum agus toraidhean copair.
Tha na toraidhean againn air a bhith air am moladh gu mòr le ar luchd-dèiligidh às an Roinn Eòrpa, Ameireagaidh, an Ear Mheadhanach, Afraga agus Ear-dheas Àisia. Bidh sinn a’ tabhann bathar farpaiseach agus seirbheis coileanta do luchd-ceannach.
Stàilinn Ìre: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310an, 316, 316L, 3,4, 4, 4 430F, 440, 440c,
Ìre Alloy: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Stàilinn Àrd-astar, Stàilinn Tlàth, Alùmanum, Stàilinn Alloy, Stàilinn Carbon, Alloys Nickel Sònraichte
Ann an cruth: Bàraichean Cruinn, Bàraichean Ceàrnagach, Bàraichean Hexagonal, Bàraichean còmhnard, ceàrnan, seanalan, pròifilean, uèirichean, slatan-uèir, duilleagan, truinnsearan, pìoban gun fhiosta, Pìoban ERW, Flanges, Fittings, msaa.
Q1: Dè a th 'ann an stainless?
A: Chan eil stain a’ ciallachadh comharran sam bith air uachdar na stàilinn, no seòrsa de stàilinn nach eil air a mhilleadh le èadhar no uisge agus nach atharraich dath, gun spot, an aghaidh staining, meirgeadh, buaidh creimneach cheimigean.
Q2: A bheil stainless a 'ciallachadh nach eil meirgeadh ann?
A: Chan e, chan eil stainless a’ ciallachadh nach eil e furasta dhath no meirgeach fhaighinn, tha comas sònraichte aige a bhith a’ cur an aghaidh staining, meirgeadh agus corrach.
Q3: Am bi thu a’ toirt seachad siotaichean stàilinn gun staoin?
A: Tha, bidh sinn a’ toirt seachad diofar sheòrsaichean de dhuilleagan stàilinn gun staoin, le raointean tiugh bho 0.3-3.0mm. agus ann an diofar chrìochnaidhean.
Q4: An gabh thu ri seirbheis gearraidh gu faid?
A: Gu dearbh, is e sàsachd luchd-cleachdaidh ar prìomhachas àrd.
Q5: Ma tha òrdugh beag agam, an gabh thu ri òrdugh beag?
F: Chan e duilgheadas a th’ ann, is e ar draghan a th’ annad, thathas a’ gabhail ri meudan beaga.
Q6: Ciamar as urrainn dhut gealltainn do chàileachd toraidh?
A: An toiseach, bhon fhìor thoiseach, tha sinn mu thràth air spiorad a chuir an gnìomh nan inntinn, is e sin càileachd beatha, leanaidh ar luchd-obrach proifeasanta agus ar luchd-obrach a h-uile ceum gus am bi am bathar air a phacadh gu math agus air a chuir a-mach.
Q7: Am bi thu a 'pacadh nam bathar?
A: Bidh daoine proifeasanta a’ pacadh proifeasanta, tha diofar sheòrsan pacaidh againn roghainneil do luchd-ceannach, fear eaconamach no fear nas fheàrr.
Q8: Dè a dh'fheumas tu fios bho luchd-cleachdaidh mus dearbh luachan?
A: Airson luachan neo-mhearachdach, feumaidh fios a bhith againn air ìre, tighead, meud, crìochnachadh uachdar, dath agus meud an òrduigh agad, agus cuideachd ceann-uidhe a’ bhathair. Bidh barrachd feum air fiosrachadh toraidh gnàthaichte, leithid dealbh, cruth agus plana. An uairsin bheir sinn seachad luachan farpaiseach leis an fhiosrachadh gu h-àrd.
Q9: Dè an seòrsa teirm pàighidh a tha thu a’ gabhail ris?
A: Gabhaidh sinn ri T / T, aonadh an Iar, L / C.
Q10: Mas e òrdugh beag a tha seo, an lìbhrig thu am bathar don neach-ionaid againn?
A: Tha, tha sinn air ar breith gus fuasgladh fhaighinn air duilgheadasan ar luchd-ceannach, gheibh sinn am bathar gu sàbhailte gu taigh-bathair an neach-ionaid agad agus cuiridh sinn na dealbhan thugad.
Q11: A bheil thu dìreach a’ dèanamh duilleag rèidh? Tha mi airson saothrachadh a dhèanamh airson a’ phròiseact ùr agam.
A: Chan e, bidh sinn sa mhòr-chuid a’ toirt a-mach làimhseachadh uachdar duilleag còmhnard de stàilinn gun staoin, aig an aon àm, bidh sinn a’ saothrachadh toradh crìochnaichte meatailt gnàthaichte a rèir dealbh is plana an neach-ceannach, bheir an teicneòlaiche againn aire don chòrr.
Q12: Cia mheud dùthaich a chuir thu a-mach mu thràth?
A: Às-mhalairt gu còrr air 50 dùthaich sa mhòr-chuid à Ameireagaidh, an Ruis, an RA, Kuwait, an Èiphit, Iran,
An Tuirc, Iòrdan, msaa.
Q13: Ciamar a gheibh mi cuid de shamhlaichean?
A: Samples beaga ann an stòr agus is urrainn dhaibh na sampallan a thoirt seachad an-asgaidh. Tha catalog ri fhaighinn, a’ mhòr-chuid
pàtrain tha sampallan deiseil againn ann an stoc. Bheir sampallan gnàthaichte timcheall air 5-7 latha.
Q14: Dè an lìbhrigeadh?
A: Is e ùine lìbhrigidh òrdugh sampall 5- 7 latha. Tha òrdughan container timcheall air 15-20 latha.
Q15: Dè an tagradh a th’ ann mu na Toraidhean agad?
A: 1.elevator doras / caban no agus balla-taobh sreapadan.
2.Còmhdach balla taobh a-staigh no taobh a-muigh seòmar coinneimh / taigh-bìdh.
3.Facade nuair a bhios tu a’ còmhdach thairis air rudeigin, mar cholbhan anns an trannsa.
4.Ceiling anns a 'mhòr-bhùth. 5.Decorative a' tarraing ann an cuid de dh'àiteachan cur-seachad.
Q16: Dè cho fada ‘s as urrainn dhut gealltanas a thoirt airson a’ bhathar / crìochnachadh seo?
A: Gealladh dath airson còrr air 10 bliadhna. Faodaidh teisteanas càileachd stuthan tùsail
thoirt seachad.
