309S Plàta stàilinn gun staoin
Tuairisgeul goirid:
309SPlate stàilinn gun staoin
Faodar plàta stàilinn stainless 309S a dhèanamh le roiligeadh teth, a ’toirt a-steach tiugh leac 8.0-120mm.
Chan eil stàilinn stainless teth-roiligeadh cho math ri fuar-roiligeadh ann am feartan meacanaigeach, ach tha cruas agus ductility math ann. Tha truinnsear stàilinn stainless fuar-roiligeadh ìosal ann an cruas air sgàth deagh chruadhachadh.
Gus dèanamh cinnteach gum bi a h-uile seòrsa de neart toraidh stàilinn gun staoin, neart tensile, leudachadh agus cruas agus feartan meacanaigeach eile gus coinneachadh ris na riatanasan, mus tèid an lìbhrigeadh feumaidh a bhith annealing stàilinn gun staoin, làimhseachadh fuasglaidh, làimhseachadh teas a tha a’ fàs nas sine.
309S Stàilinn Stuth Plate Stuth Ìre
| Stuth | ASTM A240 àbhaisteach | 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 4L0 |
| JIS 4304-2005 Coitcheann | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S,SUS310S, 3SUS21L, SUS347, SUS410L, SUS430,SUS630 | |
| JIS G4305 àbhaisteach | SUS 301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS304, SUS311S, SUS311S 315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L, SUS 317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3JL, SUS40L, SUS329J3JL, SUS32L SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A | |
Sònrachadh Bathar Plate Stàilinn 309S
| Crìochnaich | Tigheadas | Caractaran | Iarrtasan |
| Chan eil 1 | 3.0mm ~ 50.0mm | Crìochnaichte le roiligeadh teth, annealing agus picilte, air a chomharrachadh le uachdar geal picilte | Uidheam gnìomhachas ceimigeach, Tancaichean gnìomhachais |
| Àir. 2B | 0.3mm ~ 6.0mm | Crìochnaichte le làimhseachadh teas, picilte às deidh rolaigeadh fuar, air a leantainn le loidhne pas craiceann gus a bhith nas gile agus uachdar rèidh | Innealan Meidigeach Iarrtas Coitcheann, Bathar-bùird |
Meudan àbhaisteach 309S Steel Plate
| Meud | Tighead: 8-120mm (slat rolair teth) |
| Leud: 1219mm, 1500mm, 1800mm, 2000mm | |
| Fad: 2438mm, 3000mm, 6000mm no mar riatanasan luchd-cleachdaidh |
309S Plate Stàilinn Co-dhèanamh ceimigeach
| Ìre | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304h | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316h | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Eile | - | - | - | - | - |
| Monail 400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
A bharrachd air truinnsear stàilinn gun staoin 309, bidh sinn cuideachd a’ toirt seachad duilleag stàilinn gun staoin 309s, stiallan stàilinn gun staoin 309, 309 bàr cruinn stàilinn, msaa.
309S truinnsear stàilinn gun staoinX309s duilleag de stàilinn gun staoinX309s Stàilinn StàilinnX309 Barra Cruinn Stàilinn
Bidh sinn a ’toirt seachad truinnsear stàilinn gun staoin ann an ìrean stuthan eile:
X304 Plàta stàilinn gun staoinX316l Plàta stàilinn gun staoinX904l Plàta stàilinn gun staoinX2205 Plàta stàilinn gun staoinX2507 Plàta stàilinn gun staoinX Plate stàilinn gun staoinX321 Plàta stàilinn gun staoinXClàr tiugh de stàilinn gun staoin
Bidh sinn a’ toirt seachad duilleag stàilinn stainles mar a leanas:
X304 Bile StàilinnX201 Bile StàilinnX316l duilleag de stàilinn gun staoinX321 Bile StàilinnX310 duilleag de stàilinn gun staoinX430 Bileag stàilinn gun staoinX904l duilleag de stàilinn gun staoinX2507 duilleag de stàilinn gun staoinX2205 Bile stàilinn gun staoin
Ìre stuth
| Stuth | ASTM A240 àbhaisteach | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 409 410 410S |
| ASTM A480 àbhaisteach | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 3193H, H 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S333325, S333251 03, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Coitcheann | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316 / 316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 àbhaisteach | SUS 301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS304, SUS311S, SUS311S 315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L, SUS 317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3JL, SUS40L, SUS329J3JL, SUS32L SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Sònrachadh Bathar
| Crìochnaich | Tigheadas | Caractaran | Iarrtasan |
| Chan eil 1 | 3.0mm ~ 50.0mm | Crìochnaichte le roiligeadh teth, annealing agus picilte, air a chomharrachadh le uachdar geal picilte | Uidheam gnìomhachas ceimigeach, Tancaichean gnìomhachais |
| Àir. 2B | 0.3mm ~ 6.0mm | Crìochnaichte le làimhseachadh teas, picilte às deidh rolaigeadh fuar, air a leantainn le loidhne pas craiceann gus a bhith nas gile agus uachdar rèidh | Innealan Meidigeach Iarrtas Coitcheann, Bathar-bùird |
| Chan eil. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Làimhseachadh teas soilleir às deidh roiligeadh fuar | Inneal cidsin, bathar cidsin, adhbhar ailtireachd |
| Àir 4 | 0.4mm ~ 3.0mm | Snasadh le sgrìoban mogal Àir 150 gu No.180. Na crìochnachaidhean as mòr-chòrdte | Goireasan giullachd Bainne & Bidhe, Uidheam Ospadail, Bath-tub |
| Àir. 8 | 0.5mm ~ 2.0mm | Uachdar meòrachail coltach ri sgàthan le bhith a’ lìomhadh le sgrìoban nas grinne thairis air 800 mogal | Reflector, Sgàthan, Taobh a-staigh - Sgeadachadh taobh a-muigh airson togail |
| HL (Hair Line) | 0.4mm ~ 3.0mm | Crìochnaichte le snasadh sreathach leantainneach | Adhbharan ailtireachd, sreapadan, carbadan bathar cidsin |
Co-dhèanamh ceimigeach
| Ìre | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304h | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316h | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Eile | - | - | - | - | - |
| Monail 400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
sinnpaisg na toraidhean stàilinn gun staoin le pàipear anti-meirge agus fàinneachan stàilinn gus casg a chuir air milleadh.
Tha bileagan aithneachaidh air an tagadh a rèir sònrachadh àbhaisteach no stiùireadh teachdaiche.
Tha pacadh sònraichte ri fhaighinn a rèir riatanas luchd-ceannach.
Pasgan coil stàilinn gun staoin
Duilleag stàilinn gun staoin / pacaid plàta stàilinn gun staoin
Pasgan stiallan stàilinn gun staoin
Pasgan giùlain
Tha a’ chompanaidh againn stèidhichte ann an Wuxi, a’ cruinneachadh baile mòr de stàilinn gun staoin ann an Sìona.
Bha sinn a’ speisealachadh ann an corailean gun staoin, siotaichean agus truinnsear, pìoban stàilinn gun staoin, pìoban stàilinn gun staoin, agus cuideachd toraidhean alùmanum agus toraidhean copair.
Tha na toraidhean againn air a bhith air am moladh gu mòr le ar luchd-dèiligidh às an Roinn Eòrpa, Ameireagaidh, an Ear Mheadhanach, Afraga agus Ear-dheas Àisia. Bidh sinn a’ tabhann bathar farpaiseach agus seirbheis coileanta do luchd-ceannach.
Stàilinn Ìre: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310an, 316, 316L, 3,4, 4, 4 430F, 440, 440c,
Ìre Alloy: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Stàilinn Àrd-astar, Stàilinn Tlàth, Alùmanum, Stàilinn Alloy, Stàilinn Carbon, Alloys Nickel Sònraichte
Ann an cruth: Bàraichean Cruinn, Bàraichean Ceàrnagach, Bàraichean Hexagonal, Bàraichean còmhnard, ceàrnan, seanalan, pròifilean, uèirichean, slatan-uèir, duilleagan, truinnsearan, pìoban gun fhiosta, Pìoban ERW, Flanges, Fittings, msaa.
Q1: Dè a th 'ann an stainless?
A: Chan eil stain a’ ciallachadh comharran sam bith air uachdar na stàilinn, no seòrsa de stàilinn nach eil air a mhilleadh le èadhar no uisge agus nach atharraich dath, gun spot, an aghaidh staining, meirgeadh, buaidh creimneach cheimigean.
Q2: A bheil stainless a 'ciallachadh nach eil meirgeadh ann?
A: Chan e, chan eil stainless a’ ciallachadh nach eil e furasta dhath no meirgeach fhaighinn, tha comas sònraichte aige a bhith a’ cur an aghaidh staining, meirgeadh agus corrach.
Q3: Am bi thu a’ toirt seachad siotaichean stàilinn gun staoin?
A: Tha, bidh sinn a’ toirt seachad diofar sheòrsaichean de dhuilleagan stàilinn gun staoin, le raointean tiugh bho 0.3-3.0mm. agus ann an diofar chrìochnaidhean.
Q4: An gabh thu ri seirbheis gearraidh gu faid?
A: Gu dearbh, is e sàsachd luchd-cleachdaidh ar prìomhachas àrd.
Q5: Ma tha òrdugh beag agam, an gabh thu ri òrdugh beag?
F: Chan e duilgheadas a th’ ann, is e ar draghan a th’ annad, thathas a’ gabhail ri meudan beaga.
Q6: Ciamar as urrainn dhut gealltainn do chàileachd toraidh?
A: An toiseach, bhon fhìor thoiseach, tha sinn mu thràth air spiorad a chuir an gnìomh nan inntinn, is e sin càileachd beatha, leanaidh ar luchd-obrach proifeasanta agus ar luchd-obrach a h-uile ceum gus am bi am bathar air a phacadh gu math agus air a chuir a-mach.
Q7: Am bi thu a 'pacadh nam bathar?
A: Bidh daoine proifeasanta a’ pacadh proifeasanta, tha diofar sheòrsan pacaidh againn roghainneil do luchd-ceannach, fear eaconamach no fear nas fheàrr.
Q8: Dè a dh'fheumas tu fios bho luchd-cleachdaidh mus dearbh luachan?
A: Airson luachan neo-mhearachdach, feumaidh fios a bhith againn air ìre, tighead, meud, crìochnachadh uachdar, dath agus meud an òrduigh agad, agus cuideachd ceann-uidhe a’ bhathair. Bidh barrachd feum air fiosrachadh toraidh gnàthaichte, leithid dealbh, cruth agus plana. An uairsin bheir sinn seachad luachan farpaiseach leis an fhiosrachadh gu h-àrd.
Q9: Dè an seòrsa teirm pàighidh a tha thu a’ gabhail ris?
A: Gabhaidh sinn ri T / T, aonadh an Iar, L / C.
Q10: Mas e òrdugh beag a tha seo, an lìbhrig thu am bathar don neach-ionaid againn?
A: Tha, tha sinn air ar breith gus fuasgladh fhaighinn air duilgheadasan ar luchd-ceannach, gheibh sinn am bathar gu sàbhailte gu taigh-bathair an neach-ionaid agad agus cuiridh sinn na dealbhan thugad.
Q11: A bheil thu dìreach a’ dèanamh duilleag rèidh? Tha mi airson saothrachadh a dhèanamh airson a’ phròiseact ùr agam.
A: Chan e, bidh sinn sa mhòr-chuid a’ toirt a-mach làimhseachadh uachdar duilleag còmhnard de stàilinn gun staoin, aig an aon àm, bidh sinn a’ saothrachadh toradh crìochnaichte meatailt gnàthaichte a rèir dealbh is plana an neach-ceannach, bheir an teicneòlaiche againn aire don chòrr.
Q12: Cia mheud dùthaich a chuir thu a-mach mu thràth?
A: Às-mhalairt gu còrr air 50 dùthaich sa mhòr-chuid à Ameireagaidh, an Ruis, an RA, Kuwait, an Èiphit, Iran,
An Tuirc, Iòrdan, msaa.
Q13: Ciamar a gheibh mi cuid de shamhlaichean?
A: Samples beaga ann an stòr agus is urrainn dhaibh na sampallan a thoirt seachad an-asgaidh. Tha catalog ri fhaighinn, a’ mhòr-chuid
pàtrain tha sampallan deiseil againn ann an stoc. Bheir sampallan gnàthaichte timcheall air 5-7 latha.
Q14: Dè an lìbhrigeadh?
A: Is e ùine lìbhrigidh òrdugh sampall 5- 7 latha. Tha òrdughan container timcheall air 15-20 latha.
Q15: Dè an tagradh a th’ ann mu na Toraidhean agad?
A: 1.elevator doras / caban no agus balla-taobh sreapadan.
2.Còmhdach balla taobh a-staigh no taobh a-muigh seòmar coinneimh / taigh-bìdh.
3.Facade nuair a bhios tu a’ còmhdach thairis air rudeigin, mar cholbhan anns an trannsa.
4.Ceiling anns a 'mhòr-bhùth. 5.Decorative a' tarraing ann an cuid de dh'àiteachan cur-seachad.
Q16: Dè cho fada ‘s as urrainn dhut gealltanas a thoirt airson a’ bhathar / crìochnachadh seo?
A: Gealladh dath airson còrr air 10 bliadhna. Faodaidh teisteanas càileachd stuthan tùsail
thoirt seachad.
