304 Pláta Cruach Dhosmálta
Cur síos gairid:
| Tiús: 8-120mm (slat rollta te) |
| Leithead: 1219mm, 1500mm, 1800mm, 2000mm |
| Fad: 2438mm, 3000mm, 6000mm nó mar riachtanais na gcustaiméirí |
Pláta Cruach Dhosmálta
Is féidir pláta cruach dhosmálta a dhéanamh trí rollta te, lena n-áirítear an tiús leac 8.0-120mm.
Níl an cruach dhosmálta te-rollta chomh maith le fuar-rollta i airíonna meicniúla, ach tá toughness maith agus insínteacht. Tá pláta cruach dhosmálta fuar-rollta íseal i toughness mar gheall ar an hardening maith.
D'fhonn a áirithiú go mbeidh gach cineál neart toraidh cruach dhosmálta, neart teanntachta, fadú agus cruas agus airíonna meicniúla eile chun na ceanglais a chomhlíonadh, ní mór é a bheith ann roimh an seachadadh cruach dhosmálta annealing, cóireáil réiteach, cóireáil teasa ag dul in aois.
Grád Ábhar
| Ábhar | Caighdeán ASTM A240 | 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 4L0 |
| JIS 4304-2005 Caighdeán | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S,SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| Caighdeán JIS G4305 | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS304, SUS3190S, SUS304S SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS313J1, SUS317J16 SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS0L4, SUS430LX, SUS329J3L SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A | |
Sonraíocht Táirge
| Críochnaigh | Tiús | Tréithe | Feidhmchláir |
| Uimh. 1 | 3.0mm~50.0mm | Críochnaithe ag te-rollta, annealing agus picilte, arb iad is sainairíonna bán dromchla picilte | Trealamh tionscal ceimiceach, umair thionsclaíocha |
| Uimh. 2B | 0.3mm~6.0mm | Críochnaithe trí chóireáil teasa, mhiotail tar éis rollta fuar, agus ina dhiaidh líne pas craiceann a bheith níos gile agus dromchla réidh | Ionstraimí Leighis Ginearálta Feidhmchláir, Earraí Boird |
Méideanna caighdeánacha
| Méid | Tiús: 8-120mm (slat rollta te) |
| Leithead: 1219mm, 1500mm, 1800mm, 2000mm | |
| Fad: 2438mm, 3000mm, 6000mm nó mar riachtanais na gcustaiméirí |
Comhdhéanamh ceimiceach
| Grád | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Eile | - | - | - | - | - |
| Móin 400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Grád Ábhar
| Ábhar | Caighdeán ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 409 410 410S |
| Caighdeán ASTM A480 | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 3190H, H.C. 321H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S33014, S33125 S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S332305, S332305 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Caighdeán | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| Caighdeán JIS G4305 | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS304, SUS3190S, SUS304S SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS313J1, SUS317J16 SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS0L4, SUS430LX, SUS329J3L SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Sonraíocht Táirge
| Críochnaigh | Tiús | Tréithe | Feidhmchláir |
| Uimh. 1 | 3.0mm~50.0mm | Críochnaithe ag te-rollta, annealing agus picilte, arb iad is sainairíonna bán dromchla picilte | Trealamh tionscal ceimiceach, umair thionsclaíocha |
| Uimh. 2B | 0.3mm~6.0mm | Críochnaithe trí chóireáil teasa, mhiotail tar éis rollta fuar, agus ina dhiaidh líne pas craiceann a bheith níos gile agus dromchla réidh | Ionstraimí Leighis Ginearálta Feidhmchláir, Earraí Boird |
| Uimh. BA (Bright Annealed) | 0.5mm~2.0mm | Cóireáil teasa geal tar éis rollta fuar | Acra cistine, earraí cistine, cuspóir ailtireachta |
| Uimh.4 | 0.4mm~3.0mm | Snasú le scríobaigh mogalra Uimh. 150 go Uimh.180. Na bailchríocha is coitianta | Áiseanna próiseála Bainne & Bia, Trealamh Ospidéil, Tubán folctha |
| Uimh. 8 | 0.5mm~2.0mm | Dromchla frithchaiteach scátháin trí snasú le scríobaigh níos míne os cionn 800 mogalra | Frithchaiteoir, Scáthán, Maisiú Taobh istigh - Taobh amuigh le haghaidh tógála |
| HL( Líne Gruaige) | 0.4mm~3.0mm | Críochnaithe ag snasta líneach leanúnach | Críocha ailtireachta, staighrí beo, feithiclí earraí cistine |
Comhdhéanamh Ceimiceach
| Grád | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Eile | - | - | - | - | - |
| Móin 400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
muidwrap na táirgí cruach dhosmálta le páipéar frith-meirge agus fáinní cruach chun damáiste a chosc.
Déantar lipéid aitheantais a chlibeáil de réir sonraíochta caighdeánach nó treoracha an chustaiméara.
Tá pacáil speisialta ar fáil de réir riachtanas an chustaiméara.
Pacáiste Coil Cruach Dhosmálta
Bileog Cruach Dhosmálta / Pacáiste Pláta Cruach Dhosmálta
Pacáiste Stráice Cruach Dhosmálta
Pacáiste Loingsiú
Tá ár gcuideachta lonnaithe i Wuxi, ag bailiú cathair cruach dhosmálta tionsclaíoch sa tSín.
Speisialtóireacht againn i cornaí dhosmálta, leatháin agus pláta, píopa cruach dhosmálta agus feistis, feadáin cruach dhosmálta, agus freisin táirgí alúmanaim agus táirgí copair.
Tá ardmholadh faighte ag ár gcuid táirgí ag ár gcliaint ón Eoraip, i Meiriceá, sa Mheánoirthear, san Afraic agus san Oirdheisceart na hÁise. Cuirfimid táirgí iomaíocha agus seirbhís chuimsitheach ar fáil do chustaiméirí.
Grád Cruach Dhosmálta: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 3,74, 316L 420, 430, 430F, 440, 440c,
Grád Cóimhiotail: Monel, Inconel, Hastolley, Duplex, Super Duplex, Tíotáiniam, Tantalam, Cruach Ardluais, Cruach Éadrom, Alúmanam, Cruach Cóimhiotail, Cruach Carbóin, Cóimhiotail Speisialta Nicil
I bhfoirm: Barraí Babhta, Barraí Cearnóga, Barraí Heicseagánacha, Barraí Maol, Uillinneacha, Cainéil, Próifílí, Sreanga, Slatanna Sreanga, Leatháin, Plátaí, Píopaí Gan uaim, Píopaí ERW, Flanges, Feistis, etc.
C1: Cad é dhosmálta?
A: Ciallaíonn dhosmálta gan marcanna ar an dromchla cruach, nó cineál cruach nach bhfuil damáiste déanta ag aer nó uisce agus nach n-athraíonn dath, gan spot, resistant a staining, meirge, éifeacht creimneach ceimiceán.
C2: An gciallaíonn dhosmálta aon meirge?
A: Níl, ciallaíonn dhosmálta nach bhfuil sé éasca daite nó meirgeach a fháil, tá cumas speisialta aige staining, meirge agus creimeadh a chur i gcoinne.
C3: An soláthraíonn tú leatháin chruach dhosmálta?
A: Sea, soláthraímid cineálacha éagsúla leatháin chruach dhosmálta, le raonta tiús ó 0.3-3.0mm. agus i bailchríocha éagsúla.
C4: An nglacann tú le seirbhís gearrtha ar fhad?
A: Ar ndóigh, is é sásamh an chustaiméara ár bpríomhthosaíocht.
C5: Má tá ordú beag agam, an nglacann tú le hordú beag?
A: Ní fadhb, is é an t-ábhar imní atá agat ná ár n-imní, glactar le méideanna beaga.
C6: Conas is féidir leat cáilíocht do tháirge a ráthú?
A: Ar dtús, ón tús, tá spiorad curtha i bhfeidhm againn cheana féin, is é sin cáilíocht na beatha, leanfaidh ár n-oibrithe gairmiúla agus ár bhfoirne gach céim suas go dtí go mbeidh na hearraí pacáilte go maith agus seolta amach.
C7: An ndéanfaidh tú na táirgí a phacáil?
A: Déanann daoine gairmiúla pacáil ghairmiúil, tá cineálacha éagsúla pacála againn roghnach do chustaiméirí, ceann eacnamaíoch nó ceann níos fearr.
C8: Cad is gá duit a fhios ón gcustaiméir roimh luachan cruinn?
A: Le haghaidh luachan cruinn, ní mór dúinn a fhios ag grád, tiús, méid, bailchríoch dromchla, dath agus cainníocht d'ordú, agus freisin ceann scríbe na n-earraí. Beidh gá le faisnéis shaincheaptha ar tháirgí, amhail líníocht, leagan amach agus plean. Ansin cuirfimid luachan iomaíoch ar fáil leis an bhfaisnéis thuas.
C9: Cén cineál téarma íocaíochta a ghlacann tú?
A: Glacaimid le T / T, aontas an Iarthair, L / C.
C10: Más ordú beag é seo, an ndéanfaidh tú na hearraí a sheachadadh chuig ár ngníomhaire?
A: Sea, rugadh muid chun fadhbanna ár gcustaiméirí a réiteach, cuirfimid na hearraí go sábháilte chuig stóras do ghníomhaire agus seolfaimid na pictiúir duit.
C11: An ndéanann tú ach bileog árasán? Ba mhaith liom déantúsaíocht a dhéanamh do mo thionscadal nua.
A: Ní hea, déanaimid cóireáil dromchla leatháin chomhréidh cruach dhosmálta den chuid is mó, ag an am céanna, déanaimid táirge críochnaithe miotail saincheaptha de réir líníocht agus plean an chustaiméara, tabharfaidh ár teicneoir aire don chuid eile.
C12: Cé mhéad coutries a d'onnmhairigh tú cheana féin?
A: Onnmhairithe chuig níos mó ná 50 tír go príomha ó Mheiriceá, an Rúis, an Ríocht Aontaithe, Cuáit, an Éigipt, an Iaráin,
an Tuirc, an Iordáin, etc.
C13: Conas is féidir liom roinnt samplaí a fháil?
A: Samplaí beaga sa siopa agus is féidir leo na samplaí a sholáthar saor in aisce. Tá catalóg ar fáil, a bhformhór
patrúin tá samplaí réidh againn i stoc. Tógfaidh samplaí saincheaptha thart ar 5-7 lá.
C14: Cad é an seachadadh?
A: Is é am seachadta ordú samplach ná 5-7 lá. Tá thart ar 15-20 lá ar orduithe coimeádáin.
C15: Cad é an t-iarratas faoi do Tháirgí?
A: Doras/cábáin 1.elevator nó agus balla taoibh an staighre staighre.
2.Clúdach balla laistigh nó lasmuigh den seomra cruinnithe/bialann.
3.Facade agus cumhdach thar rud éigin, cosúil le colúin sa stocaireacht.
4.Ceiling san ollmhargadh. Tarraingíonn 5.Decorative i roinnt áiteanna siamsaíochta.
C16: Cé chomh fada agus is féidir leat a ráthú don táirge / chríochnú seo?
A: Ráthaíocht dath ar feadh níos mó ná 10 mbliana. Is féidir deimhniú cáilíochta ábhar bunaidh
a chur ar fáil.
