Factory selling Brass Stainless Steel Pipe Fittings Elbow - Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112) – Cepheus

Short Description:

Send email to us Download as PDF

Product Detail

Technical Specification

Product Package & Shipment

Company Introduction

Question & Answers

Product Tags

Feedback (2)

It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for 304 Grade Stainless Steel U Channel , Stainless Steel Sheet Embossed , Equal Stainless Steel Angle 304 , We invites you and your enterprise to thrive together with us and share a bright future in global market.

Factory selling Brass Stainless Steel Pipe Fittings Elbow - Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112) – Cepheus Detail:

Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112)

5252/5454/5457/5657 H112 Aluminium Alloys Profiles Extrusions for Auto
We have different Aluminium and aluminium alloys extruded profiles used for motor. With different temper and different Surface treatment types: Anodizing;
Anodizing+ Electrophoretic coating;powder spray coating;Liquid spray coating, etc.
They are typically used for common structural parts, Collision safety parts and Other uses,etc.
Common structural parts: Body frame, carriage plate, frame transverse / longitudinal beam, floor, engine bracket, control arm etc
Collision safety parts: Front and rear bump beam, car door collision avoidance beam, energy absorption box, etc.
Other uses: Wind window frame, door and window frame, door interior plate, luggage rack, luggage ladder, rubbing strip, seat slide rail, seat frame, top window, sliding door guide, door accessories, ABS valve body, condensing pipe, heat exchanger parts, etc.

1)Alloy,temper and Surface treatment types of Aluminium and aluminium alloys extruded profiles used for Auto

Alloy	Temper	Surface treatment types
1100	O,H112	Anodizing; Anodizing+Electrophoretic coating; powder spray coating; Liquid spray coating
1200	H112
2008,2010,2036	T6
2017,2117	T4,T6
2024	T6,T8,T8510,T8511
3002,3003,3005	H112
4B01,4B91	T6
5005	F,H112,H111,O
5252,5454,5457,5657	H112
6005,6005A,6061,6463	T4,T5,T6
6106,6009,6010,6011,6016, 6151,6053,6A61,6S02	T6
6060,6063	T4,T5,T6,T64,T66
6008,6014	T4,T6
6082	O,T4,T5,T6
6A01	T5,T6
7003,7005,7129,7A46	T5,T6
7021	T6
7B05	T4,T5,T6

2)Using features of Aluminium and aluminium alloys extruded profiles used for Auto

Using features	Definition	Typical parts	Typical alloy
Used for common structural parts	It is used to form the main structure of vehicle, and ensure the overall strength, rigidity and vehicle’function	Body frame, carriage plate, frame transverse / longitudinal beam, floor, engine bracket, control arm etc	2008,2010,2036,6005,6005A,6009,6010,6011,6016,6151,6060,6061,6063,6463,6082,6A01,6S02,6A61,7005,7021,7129,7B05
Used for Collision safety parts	It is used for vehicle parts to avoid further damage to passenger and other components through energy absorption and deformation during vehicle collision.	Front and rear bump beam, car door collision avoidance beam, energy absorption box, etc.	6005,6005A, 6008,6106,6014,6060,6061,6063,6082,6A01,7003,7A46
Other uses	The Other parts except for the above purposes., such as decorative parts, accessories, special functional parts, etc.,	Wind window frame, door and window frame, door interior plate, luggage rack, luggage ladder, rubbing strip, seat slide rail, seat frame, top window, sliding door guide, door accessories, ABS valve body, condensing pipe, heat exchanger parts, etc.	1100,1200,2017,2117,2024,3002,3003,3005,4B01,4B91,5005,5252,5454,5457,5657,6005,6009,6010,6011,6016,6151,6053,6061,6063,6463,6082,7003

3)The chemical component of Aluminium and aluminium alloys extruded profiles used for Auto

Alloy

Chemical component(%)

Other

Each

Total

2008

0.50-0.8

≤0.40

0.7-
1.1

≤0.30

0.25-0.50

≤0.10

≤0.25

V:0.05

≤0.10

≤0.05

≤0.15

Remain

2010

≤0.50

0.7-
1.3

0.10-0.40

0.40-1.0

≤0.15

≤0.30

≤0.05

≤0.15

Remain

2036

≤0.50

2.2-
3.0

0.10-0.40

0.30-0.6

≤0.10

≤0.25

≤0.15

≤0.05

≤0.15

Remain

4B01

3.8-
5.4

≤0.40

≤0.25

0.25-0.50

≤0.20

≤0.07

≤0.15

≤0.05

≤0.15

Remain

4B91

2.0-
4.0

≤0.35

0.10-0.50

≤0.07

0.35-1.0

0.05-0.20

≤0.08

≤0.20

≤0.05

≤0.15

Remain

5252

≤0.08

≤0.10

2.2-
2.8

≤0.05

V:0.05

≤0.03

≤0.10

Remain

5457

≤0.08

≤0.10

≤0.20

0.15-0.45

0.8-
1.2

≤0.05

V:0.05

≤0.03

≤0.10

Remain

5657

≤0.08

≤0.10

≤0.03

0.6-
1.0

≤0.05

V:0.05
Ga:0.03

≤0.02

≤0.05

Remain

6008

0.5-0.9

≤0.35

≤0.30

0.40-0.7

≤0.30

≤0.20

V:
0.05-0.20

≤0.10

≤0.05

≤0.15

Remain

6011

0.6-
1.2

≤1.0

0.40-0.9

≤0.8

0.6-
1.2

≤0.30

≤0.20

≤0.05

≤0.15

Remain

6022

0.8-
1.5

0.05-0.20

0.01-0.11

0.02-0.10

0.45-0.7

≤0.10

≤0.25

≤0.15

≤0.05

≤0.15

Remain

6151

0.6-
1.2

≤1.0

≤0.35

≤0.20

0.45-0.8

0.15-0.35

≤0.25

≤0.15

≤0.05

≤0.15

Remain

6053

≤0.35

≤1.0

1.1-
1.4

0.15-0.35

≤1.0

≤0.05

≤0.15

Remain

6S02

0.90-1.15

≤0.30

0.32-0.50

0.15-0.40

0.50-0.7

0.10-0.30

≤0.08

≤0.05

≤0.15

Remain

6A61

0.55-0.75

≤0.50

0.25-0.45

≤0.10

0.75-1.40

≤0.30

≤0.10

≤0.07

≤0.05

≤0.15

Remain

7129

≤0.15

≤0.30

0.50-0.9

≤0.10

1.3-
2.0

≤0.10

4.2-
5.2

V:0.05
Ga:0.03

≤0.05

≤0.15

Remain

7A46

≤0.12

≤0.30

0.10-0.40

≤0.10

0.9-
1.7

≤0.06

6.0-
7.0

≤0.08

≤0.05

≤0.15

Remain

a:Si content is the 45%-65% of actual Mg content

4)Mechanical Property at room temperature of Aluminium and aluminium alloys extruded profiles used for Auto

Alloy	Supply Temper	Sample Temper	Wall thickness/mm			Mechanical Property					BH(Brinell Hardness) HBW
						Tensile Strength (MPa)	Yield Strength (MPa)		Elongation (%)
									A	A50mm
1100	O	O	≤25.00			75-105	≥20		≥22	≥20	-
	H112	H112	≤25.00			≥75	≥20		≥22	≥20	-
1200	H112	H112	≤25.00			≥75	≥25		≥20	≥18	23
2008	T6	T6	≤12.50			Attached Actual Measurement					-
2010	T6	T6	≤25.00			Attached Actual Measurement					-
2017	T4	T4	≤12.50			≥345		≥215	-	≥12	-
			>12.50-100.00			≥345		≥195	≥12	-	-
	T6	T6	≤12.50			Attached Actual Measurement					-
2117	T4	T4	≤12.50			Attached Actual Measurement					-
	T6	T6	≤25.00			Attached Actual Measurement					-
2024	T8 T8510 T8511	T8 T8510 T8511	≤25.00			≥455		≥380	≥5	≥4	130
	T6	T6	≤12.50			Attached Actual Measurement					-
2036	T6	T6	≤25.00			Attached Actual Measurement					-
3002	H112	H112	≤25.00			Attached Actual Measurement					-
3003	H112	H112	≤25.00			≥95		≥35	≥25	≥20	30
3005	H112	H112	≤25.00			Attached Actual Measurement					-
4B01	T6	T6	≤25.00			≥270		≥220	-	≥8	-
4B91	T6	T6	≤25.00			265-365		245-345	-	≥10	-
5005	F	-	-			-		-	-	-	-
	H112	H112	≤25.00			≥100		≥40	≥18	≥16	30
	O H111	O	≤25.00			100-150		≥40	≥20	≥18	30
5252	H112	H112	≤25.00			Attached Actual Measurement					-
6005 6005A	T4	T4	≤25.00			≥180		≥90	≥15	≥13	50
	T5	T5	≤6.30			≥250		≥200	-	≥7	-
			>6.30-25.00			250		200	8	7	-
	T6	T6	Solid profile	≤5.00		≥270		≥225	-	≥6	90
				>5.00- 10.00		260		215	-	6	85
				>10.00- 25.00		250		200	8	6	85
			Hollow profile	≤5.00		≥255		≥215	-	≥6	85
				>5.00- 15.00		≥250		≥200	≥8	≥6	85
6106	T6	T6	≤10.00			≥250		≥200	≥8	≥6	75
6008	T4	T4	≤10.00			≥180		≥90	≥15	≥13	50
	T6	T6	Solid profile		≤5.00	≥270		≥225	≥8	≥6	90
					>5.00- 10.00	≥260		≥215	≥8	≥6	85
			Hollow profile		≤5.00	≥255		≥215	≥8	≥6	85
					>5.00- 10.00	≥250		≥200	≥8	≥6	85
6009	T6	T6	≤25.00			Attached Actual Measurement					-
6010	T6	T6	≤25.00			Attached Actual Measurement					-
6011	T6	T6	≤25.00			Attached Actual Measurement					-
6014	T4	T4	≤10.00			≥140		≥70	≥15	≥13	55
	T6	T6	≤5.00			≥250		≥200	≥10	≥8	80
			>5.00- 10.00			≥225		≥180	≥8	≥6	80
6016	T6	T6	≤25.00			Attached Actual Measurement					-
6151	T6	T6	≤25.00			Attached Actual Measurement					-
6053	T6	T6	≤25.00			Attached Actual Measurement					-
6060	T4	T4	≤25.00			≥120		≥60	≥16	≥14	50
	T5	T5	≤5.00			≥160		≥120	-	≥6	60
			>5.00- 25.00			≥140		≥100	≥8	≥6	60
	T6	T6	≤3.00			≥190		≥150	-	≥6	70
			>3.00- 25.00			≥170		≥140	≥8	≥6	70
	T64	T64	≤15.00			≥180		≥120	≥12	≥10	60
	T66	T66	≤3.00			≥215		≥160	-	≥6	75
			>3.00- 25.00			≥195		≥150	≥8	≥6	75
6061	T4	T4	≤25.00			≥180		≥110	≥15	≥13	65
	T5	T5	≤16.00			≥240		≥205	≥9	≥7	-
	T6	T6	≤5.00			≥260		≥240	-	≥7	95
			>5.00- 40.00			≥260		≥240	≥10	≥8	95
6063	T4	T4	≤25.00			≥130		≥65	≥14	≥12	50
	T5	T5	≤3.00			≥175		≥130	-	≥6	65
			>3.00- 25.00			≥160		≥110	≥7	≥5	65
	T6	T6	≤10.00			≥215		≥170	-	≥6	75
			>10.00- 25.00			≥195		≥160	≥8	≥6	75
	T64	T64	≤15.00			≥180		≥120	≥12	≥10	65
	T66	T66	≤10.00			≥245		≥200	-	≥6	80
			>10.00- 25.00			≥225		≥180	≥8	≥6	80
6463	T4	T4	≤25.00			≥125		≥75	≥14	≥12	46
	T5	T5	≤25.00			≥150		≥110	≥8	≥6	60
	T6	T6	≤25.00			≥195		≥160	≥10	≥8	74
6082	O	O	≤25.00			≤160		≤110	≥14	≥12	35
	T4	T4	≤25.00			≥205		≥110	≥14	≥12	70
	T5	T5	≤5.00			≥270		≥230	-	≥6	90
	T6	T6	≤5.00			≥290		≥250	-	≥6	95
			>5.00- 25.00			≥310		≥260	≥10	≥8	95
6A01	T5	T5	≤6.00			≥245		≥205	-	≥8	-
			>6.00- 12.00			≥225		≥175	-	≥8	-
	T6	T6	≤6.00			≥265		≥235	-	≥8	-
6A61	T6	T6	≤25.00			≥260		≥240	-	≥8	-
6S02	T6	T6	≤25.00			≥315		≥285	≥15	≥15	-
7003	T5	T5	≤25.00			≥310		≥260	≥10	≥8	-
	T6	T6	≤10.00			≥350		≥290	-	≥8	110
			>10.00- 25.00			≥340		≥280	≥10	≥8	110
7005	T5	T5	≤25.00			≥345		≥305	≥10	≥8	-
	T6	T6	≤40.00			≥350		≥290	≥10	≥8	110
7021	T6	T6	≤20.00			≥410		≥350	≥10	≥8	120
7129	T5,T6	T5,T6	≤12.50			≥380		≥340	-	≥8	-
7A46	T5	T5	≤25.00			≥410		≥390	-	≥10	-
	T6	T6	≤25.00			≥420		≥390	-	≥10	-
7B05	T4	T4	≤25.00			≥315		≥195	-	≥11	-
	T5	T5	≤25.00			≥325		≥245	-	≥10	-
	T6	T6	≤25.00			≥335		≥275	-	≥10	-

Product detail pictures:

Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" plus the theory of "quality the basic, have faith in the main and management the advanced" for Factory selling Brass Stainless Steel Pipe Fittings Elbow - Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112) – Cepheus, The product will supply to all over the world, such as: Lithuania, Cannes, Frankfurt, By integrating manufacturing with foreign trade sectors, we can provide total customer solutions by guaranteeing the delivery of right products to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified products and the control of the industry trend as well as our maturity before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.

Material Grade

Material	ASTM A240 Standard	201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
	ASTM A480 Standard	302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
	JIS 4304-2005 Standard	SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630
	JIS G4305 Standard	SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A

Product Specification

Finish	Thickness	Characteristics	Applications
No. 1	3.0mm~50.0mm	Finished by hot-rolling, annealing and pickling, characterized by white pickled surface	Chemical industry equipment, Industrial tanks
No. 2B	0.3mm~6.0mm	Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface	General Application Medical Instruments, Tableware
No. BA (Bright Annealed)	0.5mm~2.0mm	Bright heat treatment after cold rolling	Kitchen utensil, kitchen ware, architectural purpose
No. 4	0.4mm~3.0mm	Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes	Milk & Food processing facilities, Hospital Equipment, Bath-tub
No. 8	0.5mm~2.0mm	A mirror-like reflective surface by polishing with finer abrasives over 800 mesh	Reflector, Mirror, Interior-Exterior decoration forbuilding
HL(Hair Line)	0.4mm~3.0mm	Finished by continuous linear polishing	Architectural purposes, escalators, kitchen ware vehicles

Chemical Composition

Grade	C	Si	Mn	P	S	Cr	Ni	Mo	Ti	N	Cu	Nb
201	≤0.15	≤1.0	5.50-7.50	≤0.05	≤0.03	16.00-18.00	3.50-5.50	-	-	0.05-0.25	-	-
202	≤0.15	≤1.0	7.50-10.00	≤0.05	≤0.03	17.00-19.00	4.00-6.00	-	-	0.05-0.25	-	-
301	≤0.15	≤1.0	≤2.0	≤0.045	≤0.03	16.00-18.00	6.00-8.00	-	-	≤0.1	-	-
302	≤0.15	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	8.00-10.00	-	-	≤0.1	-	-
303	≤0.15	≤1.0	≤2.0	≤0.2	≥0.15	17.00-19.00	8.00-10.00	≤0.6	-	≤0.1	-	-
304	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	8.00-10.00	-	-	-	-	-
304L	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	8.00-10.00	-	-	-	-	-
304H	0.04-0.1	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	8.00-10.00	-	-	-	-	-
304N	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	8.00-10.00	-	-	0.10-0.16	-	-
304J1	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	6.00-9.00	-	-	-	1.00-3.00	-
305	≤0.12	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	10.50-13.00	-	-	-	-	-
309S	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	22.00-24.00	12.00-15.00	-	-	-	-	-
310S	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	24.00-26.00	19.00-22.00	-	-	-	-	-
316	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	16.00-18.00	10.00-14.00	2.00-3.00	-	-	-	-
316L	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	16.00-18.00	12.00-15.00	2.00-3.00	-	-	-	-
316H	≤0.1	≤1.0	≤2.0	≤0.035	≤0.03	16.00-18.00	10.00-14.00	2.00-3.00	-	-	-	-
316N	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	16.00-18.00	10.00-14.00	2.00-3.00	-	0.10-0.16	-	-
316Ti	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	16.00-19.00	11.00-14.00	2.00-3.00	≥5C	-	-	-
317L	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	18.00-20.00	11.00-15.00	3.00-4.00	-	-	-	-
321	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	9.00-12.00	-	5C-0.7	-	-	-
347	≤0.08	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	9.00-12.00	-	-	-	-	10C-1.10
347H	≤0.1	≤1.0	≤2.0	≤0.035	≤0.03	17.00-19.00	9.00-12.00	-	-	-	-	8C-1.10
2205	≤0.03	≤1.0	≤2.0	≤0.035	≤0.03	21.00-24.00	4.50-6.50	2.50-3.50	-	0.08-0.20	-	-
2507	≤0.03	≤0.8	≤1.2	≤0.035	≤0.02	24.00-26.00	6.00-8.00	3.00-5.00	-	0.24-0.32	-	-
904L	≤0.02	≤1.0	≤2.0	≤0.045	≤0.03	19.00-23.00	23.00-28.00	4.00-5.00	-	-	1.00-2.00	-
C276	≤0.02	≤0.05	≤1.0	-	-	14.00-16.50	Other	-	-	-	-	-
Monel400	≤0.3	≤0.5	≤2.0	-	≤0.024	-	≥63	-	-	-	28-34	-
409L	≤0.03	≤1.0	≤1.0	≤0.035	≤0.03	17.00-19.00	-	-	-	-	-	-
410	≤0.15	≤1.0	≤1.0	≤0.035	≤0.03	11.50-13.50	-	-	-	-	-	-
410L	≤0.03	≤1.0	≤1.0	≤0.035	≤0.03	11.50-13.50	-	-	-	-	-	-
420J1	0.16-0.25	≤1.0	≤1.0	≤0.035	≤0.03	12.00-14.00	-	-	-	-	-	-
420J2	0.26-0.40	≤1.0	≤1.0	≤0.035	≤0.03	12.00-14.00	-	-	-	-	-	-
430	≤0.12	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	-	-	-	-	-
436L	≤0.025	≤1.0	≤1.0	≤0.035	≤0.03	16.00-19.00	-	-	-	-	-	-
439	≤0.03	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	-	-	-	-	-
440A	0.60-0.75	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	≤0.75	-	-	-	-
440B	0.75-0.95	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	≤0.75	-	-	-	-
440C	0.95-1.2	≤1.0	≤1.0	≤0.035	≤0.03	16.00-18.00	-	≤0.75	-	-	-	-
441	≤0.03	0.2-0.8	≤0.7	≤0.03	≤0.015	17.50-18.50	-	≤0.5	0.1-0.5	≤0.025	-	0.3+3C-0.9

We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.

Identification labels are tagged accordingto standard specification or customer’s instructions.

Special packing is available as per customer’s requirement.

Stainless Steel Coil Package

Stainless Steel Sheet / Stainless Steel Plate Package

Stainless Steel Strip Package

Shipment Package

Our company is based in Wuxi, gathering city of industrial stainless steel in China.

We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.

Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.

Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,

Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys

In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.

Q1: What is stainless?

A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.

Q2: Does stainless mean no rusting?

A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.

Q3: Do you supply stainless steel sheets?

A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.

Q4: Do you accept cut to length service?

A: Of course, customer’s satisfaction is our top priority.

Q5: If i have a small order, do you accept small order?

A: Not a problem, your concern is our concern, small quantities are accepted.

Q6: How can you guarantee your product quality?

A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.

Q7: Will you pack the products?

A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.

Q8: What do you need to know from customer before accurate quotation?

A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.

Q9: What kind of payment term you accpet?

A: We accept T/T, West union, L/C.

Q10: If this is a small order, will you delivery the goods to our agent?

A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.

Q11: Do you just make flat sheet? I want to make a fabrication for my new project.

A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.

Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.

Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.

304 Grade Stainless Steel U Channel

304 Stainless Steel Angle

309s Stainless Steel Sheet

321 Stainless Steel Strip

Heavy Wall Stainless Steel Tubing

Ss304 Finish Stainless Steel Sheet

The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.