Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112)
Short Description:
China leading provider of Aluminium Discs Circles and Aluminum Sheet Circle
Aluminium Alloys Profiles Extrusions for Auto (5252/5454/5457/5657 H112)
5252/5454/5457/5657 H112 Aluminium Alloys Profiles Extrusions for Auto
We have different Aluminium and aluminium alloys extruded profiles used for motor. With different temper and different Surface treatment types: Anodizing;
Anodizing+ Electrophoretic coating;powder spray coating;Liquid spray coating, etc.
They are typically used for common structural parts, Collision safety parts and Other uses,etc.
Common structural parts: Body frame, carriage plate, frame transverse / longitudinal beam, floor, engine bracket, control arm etc
Collision safety parts: Front and rear bump beam, car door collision avoidance beam, energy absorption box, etc.
Other uses: Wind window frame, door and window frame, door interior plate, luggage rack, luggage ladder, rubbing strip, seat slide rail, seat frame, top window, sliding door guide, door accessories, ABS valve body, condensing pipe, heat exchanger parts, etc.
1)Alloy,temper and Surface treatment types of Aluminium and aluminium alloys extruded profiles used for Auto
| Alloy | Temper | Surface treatment types |
| 1100 | O,H112 | Anodizing; Anodizing+Electrophoretic coating; powder spray coating; Liquid spray coating |
| 1200 | H112 | |
| 2008,2010,2036 | T6 | |
| 2017,2117 | T4,T6 | |
| 2024 | T6,T8,T8510,T8511 | |
| 3002,3003,3005 | H112 | |
| 4B01,4B91 | T6 | |
| 5005 | F,H112,H111,O | |
| 5252,5454,5457,5657 | H112 | |
| 6005,6005A,6061,6463 | T4,T5,T6 | |
| 6106,6009,6010,6011,6016, 6151,6053,6A61,6S02 |
T6 | |
| 6060,6063 | T4,T5,T6,T64,T66 | |
| 6008,6014 | T4,T6 | |
| 6082 | O,T4,T5,T6 | |
| 6A01 | T5,T6 | |
| 7003,7005,7129,7A46 | T5,T6 | |
| 7021 | T6 | |
| 7B05 | T4,T5,T6 |
2)Using features of Aluminium and aluminium alloys extruded profiles used for Auto
| Using features | Definition | Typical parts | Typical alloy |
| Used for common structural parts | It is used to form the main structure of vehicle, and ensure the overall strength, rigidity and vehicle’function | Body frame, carriage plate, frame transverse / longitudinal beam, floor, engine bracket, control arm etc | 2008,2010,2036,6005,6005A,6009,6010,6011,6016,6151,6060,6061,6063,6463,6082,6A01,6S02,6A61,7005,7021,7129,7B05 |
| Used for Collision safety parts | It is used for vehicle parts to avoid further damage to passenger and other components through energy absorption and deformation during vehicle collision. |
Front and rear bump beam, car door collision avoidance beam, energy absorption box, etc. | 6005,6005A, 6008,6106,6014,6060,6061,6063,6082,6A01,7003,7A46 |
| Other uses | The Other parts except for the above purposes., such as decorative parts, accessories, special functional parts, etc., | Wind window frame, door and window frame, door interior plate, luggage rack, luggage ladder, rubbing strip, seat slide rail, seat frame, top window, sliding door guide, door accessories, ABS valve body, condensing pipe, heat exchanger parts, etc. | 1100,1200,2017,2117,2024,3002,3003,3005,4B01,4B91,5005,5252,5454,5457,5657,6005,6009,6010,6011,6016,6151,6053,6061,6063,6463,6082,7003 |
3)The chemical component of Aluminium and aluminium alloys extruded profiles used for Auto
| Alloy | Chemical component(%) | ||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Other | Al | |||
| Each | Total | ||||||||||||
| 2008 | 0.50-0.8 | ≤0.40 | 0.7- 1.1 |
≤0.30 | 0.25-0.50 | ≤0.10 | ≤0.25 | V:0.05 | ≤0.10 | - | ≤0.05 | ≤0.15 | Remain |
| 2010 | ≤0.50 | ≤0.50 | 0.7- 1.3 |
0.10-0.40 | 0.40-1.0 | ≤0.15 | ≤0.30 | - | - | - | ≤0.05 | ≤0.15 | Remain |
| 2036 | ≤0.50 | ≤0.50 | 2.2- 3.0 |
0.10-0.40 | 0.30-0.6 | ≤0.10 | ≤0.25 | - | ≤0.15 | - | ≤0.05 | ≤0.15 | Remain |
| 4B01 | 3.8- 5.4 |
≤0.40 | ≤0.25 | ≤0.25 | 0.25-0.50 | ≤0.20 | ≤0.07 | - | ≤0.15 | - | ≤0.05 | ≤0.15 | Remain |
| 4B91 | 2.0- 4.0 |
≤0.35 | 0.10-0.50 | ≤0.07 | 0.35-1.0 | 0.05-0.20 | ≤0.08 | ≤0.20 | - | ≤0.05 | ≤0.15 | Remain | |
| 5252 | ≤0.08 | ≤0.10 | ≤0.10 | ≤0.10 | 2.2- 2.8 |
- | ≤0.05 | V:0.05 | - | - | ≤0.03 | ≤0.10 | Remain |
| 5457 | ≤0.08 | ≤0.10 | ≤0.20 | 0.15-0.45 | 0.8- 1.2 |
- | ≤0.05 | V:0.05 | - | - | ≤0.03 | ≤0.10 | Remain |
| 5657 | ≤0.08 | ≤0.10 | ≤0.10 | ≤0.03 | 0.6- 1.0 |
- | ≤0.05 | V:0.05 Ga:0.03 |
- | - | ≤0.02 | ≤0.05 | Remain |
| 6008 | 0.5-0.9 | ≤0.35 | ≤0.30 | ≤0.30 | 0.40-0.7 | ≤0.30 | ≤0.20 | V: 0.05-0.20 |
≤0.10 | - | ≤0.05 | ≤0.15 | Remain |
| 6011 | 0.6- 1.2 |
≤1.0 | 0.40-0.9 | ≤0.8 | 0.6- 1.2 |
≤0.30 | ≤0.20 | - | ≤0.20 | - | ≤0.05 | ≤0.15 | Remain |
| 6022 | 0.8- 1.5 |
0.05-0.20 | 0.01-0.11 | 0.02-0.10 | 0.45-0.7 | ≤0.10 | ≤0.25 | - | ≤0.15 | - | ≤0.05 | ≤0.15 | Remain |
| 6151 | 0.6- 1.2 |
≤1.0 | ≤0.35 | ≤0.20 | 0.45-0.8 | 0.15-0.35 | ≤0.25 | - | ≤0.15 | - | ≤0.05 | ≤0.15 | Remain |
| 6053 | a | ≤0.35 | ≤1.0 | - | 1.1- 1.4 |
0.15-0.35 | ≤1.0 | - | - | - | ≤0.05 | ≤0.15 | Remain |
| 6S02 | 0.90-1.15 | ≤0.30 | 0.32-0.50 | 0.15-0.40 | 0.50-0.7 | 0.10-0.30 | ≤0.08 | - | ≤0.05 | - | ≤0.05 | ≤0.15 | Remain |
| 6A61 | 0.55-0.75 | ≤0.50 | 0.25-0.45 | ≤0.10 | 0.75-1.40 | ≤0.30 | ≤0.10 | - | ≤0.07 | - | ≤0.05 | ≤0.15 | Remain |
| 7129 | ≤0.15 | ≤0.30 | 0.50-0.9 | ≤0.10 | 1.3- 2.0 |
≤0.10 | 4.2- 5.2 |
V:0.05 Ga:0.03 |
≤0.05 | - | ≤0.05 | ≤0.15 | Remain |
| 7A46 | ≤0.12 | ≤0.30 | 0.10-0.40 | ≤0.10 | 0.9- 1.7 |
≤0.06 | 6.0- 7.0 |
- | ≤0.08 | - | ≤0.05 | ≤0.15 | Remain |
| a:Si content is the 45%-65% of actual Mg content | |||||||||||||
4)Mechanical Property at room temperature of Aluminium and aluminium alloys extruded profiles used for Auto
| Alloy | Supply Temper | Sample Temper | Wall thickness/mm | Mechanical Property | BH(Brinell Hardness) HBW |
||||||
| Tensile Strength (MPa) |
Yield Strength (MPa) |
Elongation (%) | |||||||||
| A | A50mm | ||||||||||
| 1100 | O | O | ≤25.00 | 75-105 | ≥20 | ≥22 | ≥20 | - | |||
| H112 | H112 | ≤25.00 | ≥75 | ≥20 | ≥22 | ≥20 | - | ||||
| 1200 | H112 | H112 | ≤25.00 | ≥75 | ≥25 | ≥20 | ≥18 | 23 | |||
| 2008 | T6 | T6 | ≤12.50 | Attached Actual Measurement | - | ||||||
| 2010 | T6 | T6 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 2017 | T4 | T4 | ≤12.50 | ≥345 | ≥215 | - | ≥12 | - | |||
| >12.50-100.00 | ≥345 | ≥195 | ≥12 | - | - | ||||||
| T6 | T6 | ≤12.50 | Attached Actual Measurement | - | |||||||
| 2117 | T4 | T4 | ≤12.50 | Attached Actual Measurement | - | ||||||
| T6 | T6 | ≤25.00 | Attached Actual Measurement | - | |||||||
| 2024 | T8 T8510 T8511 |
T8 T8510 T8511 |
≤25.00 | ≥455 | ≥380 | ≥5 | ≥4 | 130 | |||
| T6 | T6 | ≤12.50 | Attached Actual Measurement | - | |||||||
| 2036 | T6 | T6 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 3002 | H112 | H112 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 3003 | H112 | H112 | ≤25.00 | ≥95 | ≥35 | ≥25 | ≥20 | 30 | |||
| 3005 | H112 | H112 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 4B01 | T6 | T6 | ≤25.00 | ≥270 | ≥220 | - | ≥8 | - | |||
| 4B91 | T6 | T6 | ≤25.00 | 265-365 | 245-345 | - | ≥10 | - | |||
| 5005 | F | - | - | - | - | - | - | - | |||
| H112 | H112 | ≤25.00 | ≥100 | ≥40 | ≥18 | ≥16 | 30 | ||||
| O H111 | O | ≤25.00 | 100-150 | ≥40 | ≥20 | ≥18 | 30 | ||||
| 5252 | H112 | H112 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 6005 6005A |
T4 | T4 | ≤25.00 | ≥180 | ≥90 | ≥15 | ≥13 | 50 | |||
| T5 | T5 | ≤6.30 | ≥250 | ≥200 | - | ≥7 | - | ||||
| >6.30-25.00 | 250 | 200 | 8 | 7 | - | ||||||
| T6 | T6 | Solid profile | ≤5.00 | ≥270 | ≥225 | - | ≥6 | 90 | |||
| >5.00- 10.00 |
260 | 215 | - | 6 | 85 | ||||||
| >10.00- 25.00 |
250 | 200 | 8 | 6 | 85 | ||||||
| Hollow profile | ≤5.00 | ≥255 | ≥215 | - | ≥6 | 85 | |||||
| >5.00- 15.00 |
≥250 | ≥200 | ≥8 | ≥6 | 85 | ||||||
| 6106 | T6 | T6 | ≤10.00 | ≥250 | ≥200 | ≥8 | ≥6 | 75 | |||
| 6008 | T4 | T4 | ≤10.00 | ≥180 | ≥90 | ≥15 | ≥13 | 50 | |||
| T6 | T6 | Solid profile | ≤5.00 | ≥270 | ≥225 | ≥8 | ≥6 | 90 | |||
| >5.00- 10.00 |
≥260 | ≥215 | ≥8 | ≥6 | 85 | ||||||
| Hollow profile | ≤5.00 | ≥255 | ≥215 | ≥8 | ≥6 | 85 | |||||
| >5.00- 10.00 |
≥250 | ≥200 | ≥8 | ≥6 | 85 | ||||||
| 6009 | T6 | T6 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 6010 | T6 | T6 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 6011 | T6 | T6 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 6014 | T4 | T4 | ≤10.00 | ≥140 | ≥70 | ≥15 | ≥13 | 55 | |||
| T6 | T6 | ≤5.00 | ≥250 | ≥200 | ≥10 | ≥8 | 80 | ||||
| >5.00- 10.00 | ≥225 | ≥180 | ≥8 | ≥6 | 80 | ||||||
| 6016 | T6 | T6 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 6151 | T6 | T6 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 6053 | T6 | T6 | ≤25.00 | Attached Actual Measurement | - | ||||||
| 6060 | T4 | T4 | ≤25.00 | ≥120 | ≥60 | ≥16 | ≥14 | 50 | |||
| T5 | T5 | ≤5.00 | ≥160 | ≥120 | - | ≥6 | 60 | ||||
| >5.00- 25.00 | ≥140 | ≥100 | ≥8 | ≥6 | 60 | ||||||
| T6 | T6 | ≤3.00 | ≥190 | ≥150 | - | ≥6 | 70 | ||||
| >3.00- 25.00 | ≥170 | ≥140 | ≥8 | ≥6 | 70 | ||||||
| T64 | T64 | ≤15.00 | ≥180 | ≥120 | ≥12 | ≥10 | 60 | ||||
| T66 | T66 | ≤3.00 | ≥215 | ≥160 | - | ≥6 | 75 | ||||
| >3.00- 25.00 | ≥195 | ≥150 | ≥8 | ≥6 | 75 | ||||||
| 6061 | T4 | T4 | ≤25.00 | ≥180 | ≥110 | ≥15 | ≥13 | 65 | |||
| T5 | T5 | ≤16.00 | ≥240 | ≥205 | ≥9 | ≥7 | - | ||||
| T6 | T6 | ≤5.00 | ≥260 | ≥240 | - | ≥7 | 95 | ||||
| >5.00- 40.00 | ≥260 | ≥240 | ≥10 | ≥8 | 95 | ||||||
| 6063 | T4 | T4 | ≤25.00 | ≥130 | ≥65 | ≥14 | ≥12 | 50 | |||
| T5 | T5 | ≤3.00 | ≥175 | ≥130 | - | ≥6 | 65 | ||||
| >3.00- 25.00 | ≥160 | ≥110 | ≥7 | ≥5 | 65 | ||||||
| T6 | T6 | ≤10.00 | ≥215 | ≥170 | - | ≥6 | 75 | ||||
| >10.00- 25.00 | ≥195 | ≥160 | ≥8 | ≥6 | 75 | ||||||
| T64 | T64 | ≤15.00 | ≥180 | ≥120 | ≥12 | ≥10 | 65 | ||||
| T66 | T66 | ≤10.00 | ≥245 | ≥200 | - | ≥6 | 80 | ||||
| >10.00- 25.00 | ≥225 | ≥180 | ≥8 | ≥6 | 80 | ||||||
| 6463 | T4 | T4 | ≤25.00 | ≥125 | ≥75 | ≥14 | ≥12 | 46 | |||
| T5 | T5 | ≤25.00 | ≥150 | ≥110 | ≥8 | ≥6 | 60 | ||||
| T6 | T6 | ≤25.00 | ≥195 | ≥160 | ≥10 | ≥8 | 74 | ||||
| 6082 | O | O | ≤25.00 | ≤160 | ≤110 | ≥14 | ≥12 | 35 | |||
| T4 | T4 | ≤25.00 | ≥205 | ≥110 | ≥14 | ≥12 | 70 | ||||
| T5 | T5 | ≤5.00 | ≥270 | ≥230 | - | ≥6 | 90 | ||||
| T6 | T6 | ≤5.00 | ≥290 | ≥250 | - | ≥6 | 95 | ||||
| >5.00- 25.00 | ≥310 | ≥260 | ≥10 | ≥8 | 95 | ||||||
| 6A01 | T5 | T5 | ≤6.00 | ≥245 | ≥205 | - | ≥8 | - | |||
| >6.00- 12.00 | ≥225 | ≥175 | - | ≥8 | - | ||||||
| T6 | T6 | ≤6.00 | ≥265 | ≥235 | - | ≥8 | - | ||||
| 6A61 | T6 | T6 | ≤25.00 | ≥260 | ≥240 | - | ≥8 | - | |||
| 6S02 | T6 | T6 | ≤25.00 | ≥315 | ≥285 | ≥15 | ≥15 | - | |||
| 7003 | T5 | T5 | ≤25.00 | ≥310 | ≥260 | ≥10 | ≥8 | - | |||
| T6 | T6 | ≤10.00 | ≥350 | ≥290 | - | ≥8 | 110 | ||||
| >10.00- 25.00 | ≥340 | ≥280 | ≥10 | ≥8 | 110 | ||||||
| 7005 | T5 | T5 | ≤25.00 | ≥345 | ≥305 | ≥10 | ≥8 | - | |||
| T6 | T6 | ≤40.00 | ≥350 | ≥290 | ≥10 | ≥8 | 110 | ||||
| 7021 | T6 | T6 | ≤20.00 | ≥410 | ≥350 | ≥10 | ≥8 | 120 | |||
| 7129 | T5,T6 | T5,T6 | ≤12.50 | ≥380 | ≥340 | - | ≥8 | - | |||
| 7A46 | T5 | T5 | ≤25.00 | ≥410 | ≥390 | - | ≥10 | - | |||
| T6 | T6 | ≤25.00 | ≥420 | ≥390 | - | ≥10 | - | ||||
| 7B05 | T4 | T4 | ≤25.00 | ≥315 | ≥195 | - | ≥11 | - | |||
| T5 | T5 | ≤25.00 | ≥325 | ≥245 | - | ≥10 | - | ||||
| T6 | T6 | ≤25.00 | ≥335 | ≥275 | - | ≥10 | - | ||||
Material Grade
| Material | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| Finish | Thickness | Characteristics | Applications |
| No. 1 | 3.0mm~50.0mm | Finished by hot-rolling, annealing and pickling, characterized by white pickled surface | Chemical industry equipment, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface | General Application Medical Instruments, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware, architectural purpose |
| No. 4 | 0.4mm~3.0mm | Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes | Milk & Food processing facilities, Hospital Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
| HL(Hair Line) | 0.4mm~3.0mm | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware vehicles |
Chemical Composition
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Nb |
|
201 |
≤0.15 |
≤1.0 |
5.50-7.50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3.50-5.50 |
- |
- |
0.05-0.25 |
- |
- |
|
202 |
≤0.15 |
≤1.0 |
7.50-10.00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4.00-6.00 |
- |
- |
0.05-0.25 |
- |
- |
|
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6.00-8.00 |
- |
- |
≤0.1 |
- |
- |
|
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
|
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
|
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304H |
0.04-0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0.10-0.16 |
- |
- |
|
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6.00-9.00 |
- |
- |
- |
1.00-3.00 |
- |
|
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10.50-13.00 |
- |
- |
- |
- |
- |
|
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22.00-24.00 |
12.00-15.00 |
- |
- |
- |
- |
- |
|
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24.00-26.00 |
19.00-22.00 |
- |
- |
- |
- |
- |
|
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0.10-0.16 |
- |
- |
|
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
|
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11.00-15.00 |
3.00-4.00 |
- |
- |
- |
- |
|
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0.7 |
- |
- |
- |
|
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
|
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
|
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4.50-6.50 |
2.50-3.50 |
- |
0.08-0.20 |
- |
- |
|
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24.00-26.00 |
6.00-8.00 |
3.00-5.00 |
- |
0.24-0.32 |
- |
- |
|
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19.00-23.00 |
23.00-28.00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
|
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14.00-16.50 |
Other |
- |
- |
- |
- |
- |
|
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
|
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
|
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
420J1 |
0.16-0.25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
420J2 |
0.26-0.40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
|
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
440A |
0.60-0.75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440B |
0.75-0.95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440C |
0.95-1.2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
441 |
≤0.03 |
0.2-0.8 |
≤0.7 |
≤0.03 |
≤0.015 |
17.50-18.50 |
- |
≤0.5 |
0.1-0.5 |
≤0.025 |
- |
0.3+3C-0.9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.
